?? kernel.lst
字號:
C51 COMPILER V7.06 KERNEL 07/02/2003 10:27:49 PAGE 1
C51 COMPILER V7.06, COMPILATION OF MODULE KERNEL
OBJECT MODULE PLACED IN kernel.OBJ
COMPILER INVOKED BY: C:\KEIL\C51\BIN\C51.EXE kernel.c OPTIMIZE(2,SPEED) BROWSE DEBUG OBJECTEXTEND
stmt level source
1 /****************************************Copyright (c)**************************************************
2 ** 廣州周立功單片機發展有限公司
3 ** 研 究 所
4 ** http://www.zlgmcu.com
5 **--------------當前版本修訂------------------------------------------------------------------------------
6 ** 修改人: 劉英斌
7 ** 日 期:2003-03-13
8 ** 描 述:ISP1581 V1.0
9 **------------------------------------------------------------------------------------------------------
10 ********************************************************************************************************/
11
12 #include "standard.h"
13 #include "Kernel.h"
14 #include "D14.h"
15
16 //***********************************************************************
17 //* *
18 //* External routine Definition *
19 //* *
20 //***********************************************************************
21
22 extern Init_Main();
23 extern USB_Debug_Mode();
24 extern DMA_Debug_Mode();
25 extern USB_INT_FLAG USB_Int_Flag;
26 extern DMA_INT_FLAG DMA_Int_Flag;
27 extern USB_DEVICE USB_Device;
28 extern volatile D14_CNTRL_REG xdata D14_Cntrl_Reg;
29 extern void Check_Busy(void);
30 extern void Init_D14(void);
31 extern void Init_Endpoint(void);
32 extern void Init_Device(void);
33 extern void Get_PIDVID(void);
34 extern unsigned int read_endpoint(unsigned char endp,unsigned int len,unsigned char *buf);
35 extern unsigned int write_endpoint(unsigned char endp,unsigned int len,unsigned char *buf);
36
37
38 extern UC VID[2],PID[2];
39 extern UC idata Endpt_FIFO[MAX_BUF];
40 extern Set_USB(void);
41 extern TIMER Timer;
42
43 //***********************************************************************
44 //* *
45 //* Prototype routine Definition *
46 //* *
47 //***********************************************************************
48
49 void Start_mSEC_Timer(Data);
50 void Start_SEC_Timer(Data);
51
52 //***********************************************************************
53 //* *
54 //* Variable Definition *
55 //* *
C51 COMPILER V7.06 KERNEL 07/02/2003 10:27:49 PAGE 2
56 //***********************************************************************
57
58 UI Temp;
59 KERNEL Kernel_Flag;
60
61
62 //***********************************************************************
63 //* *
64 //* Routine Definition *
65 //* *
66 //***********************************************************************
67
68 //***********************************************************************
69 //* *
70 //* Routine : Main *
71 //* Input : None *
72 //* Output : None *
73 //* Function : main loop *
74 //* *
75 //***********************************************************************
76
77 void Main(void)
78 {
79 1 unsigned int a;
80 1 unsigned char b[16];
81 1
82 1 //Initialization routine
83 1 //初始化子程序
84 1 Init_Main();
85 1
86 1 //enable device and reset the device address
87 1 D14_Cntrl_Reg.D14_MODE.BITS.SOFTCT = 1;
88 1
89 1 do
90 1 {
91 2
92 2
93 2 //USB routine
94 2 USB_Debug_Mode();
95 2
96 2 //Generic DMA routine
97 2 DMA_Debug_Mode();
98 2
99 2 if (USB_Int_Flag.BITS.EP1RX)
100 2 {
101 3 USB_Int_Flag.BITS.EP1RX = 0;
102 3 a=read_endpoint(0x02,8,b);
103 3 b[0]=0;
104 3 b[1]=0x12;
105 3 b[2]=0x12;
106 3 b[3]=0x12;
107 3 }
108 2 a=write_endpoint(0x03,4,b);
109 2
110 2
111 2
112 2 }
113 1 while(1);
114 1
115 1 }
116
117
C51 COMPILER V7.06 KERNEL 07/02/2003 10:27:49 PAGE 3
118
119 //***********************************************************************
120 //* *
121 //* Routine : Start_mSEC_Timer(Delay) *
122 //* Input : Delay in milli second *
123 //* Output : Start timer operation *
124 //* Function : To start the timeout operation based on the delay i/p *
125 //* *
126 //***********************************************************************
127
128 void Start_mSEC_Timer(Data)
129 {
130 1
131 1
132 1 do
133 1 {
134 2
135 2 //calculate timer value
136 2 Temp = Timer.mSEC_Scale;
137 2 Temp = 0xffff - Temp;
138 2
139 2 ET0 = 1;
140 2
141 2 //calculate timer value
142 2 //initialize timer 0 counter
143 2 Temp >>= 8;
144 2 TH0 = (UC) Temp;
145 2 Temp = Timer.mSEC_Scale;
146 2 Temp = 0xffff - Temp;
147 2 TL0 = (UC) Temp;
148 2
149 2 //start timer count
150 2 TR0 = 1;
151 2
152 2 Kernel_Flag.BITS.Timer_Expired = 0;
153 2 while(!Kernel_Flag.BITS.Timer_Expired);
154 2 Kernel_Flag.BITS.Timer_Expired = 0;
155 2
156 2
157 2 //stop timer
158 2 TR0 = 0;
159 2 ET0 = 0;
160 2
161 2 Data--;
162 2 }
163 1 while(Data != 0);
164 1 }
165
166
MODULE INFORMATION: STATIC OVERLAYABLE
CODE SIZE = 198 ----
CONSTANT SIZE = ---- ----
XDATA SIZE = ---- ----
PDATA SIZE = ---- ----
DATA SIZE = 6 20
IDATA SIZE = ---- ----
BIT SIZE = ---- ----
END OF MODULE INFORMATION.
C51 COMPILATION COMPLETE. 0 WARNING(S), 0 ERROR(S)
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -