This value of this object may be used to derive the name
         (e.g. a file name) which is used by the Script MIB
         implementation to access the script in non-volatile
         storage. The details of this mapping are implementation
         specific. However, the mapping needs to ensure that scripts
         created by different owners with the same script name do not
         map to the same name in non-volatile storage."
    ::= { smScriptEntry 2 }

smScriptDescr OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A description of the purpose of the script."
    ::= { smScriptEntry 3 }

smScriptLanguage OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of this object type identifies an entry in the
         smLangTable which is used to execute this script.
         The special value 0 may be used by hard-wired scripts
         that can not be modified and that are executed by
         internal functions.

         Set requests to change this object are invalid if the
         value of smScriptOperStatus is `enabled' or `compiling'
         and will result in an inconsistentValue error.

         Note that the data type and the range of this object must
         be consistent with the definition of smLangIndex."
    ::= { smScriptEntry 4 }

smScriptSource OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object either contains a reference to the script
         source or an empty string. A reference must be given
         in the form of a Uniform Resource Locator (URL) as
         defined in RFC 2396. The allowed character sets and the
         encoding rules defined in RFC 2396 section 2 apply.

         When the smScriptAdminStatus object is set to `enabled',
         the Script MIB implementation will `pull' the script
         source from the URL contained in this object if the URL
         is not empty.

         An empty URL indicates that the script source is loaded
         from local storage. The script is read from the smCodeTable
         if the value of smScriptStorageType is volatile. Otherwise,
         the script is read from non-volatile storage.

         Note: This document does not mandate implementation of any
         specific URL scheme. An attempt to load a script from a
         nonsupported URL scheme will cause the smScriptOperStatus
         to report an `unknownProtocol' error.

         Set requests to change this object are invalid if the
         value of smScriptOperStatus is `enabled', `editing',
         `retrieving' or `compiling' and will result in an
         inconsistentValue error."
    DEFVAL { ''H }
    ::= { smScriptEntry 5 }

smScriptAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2),
                    editing(3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of this object indicates the desired status of
         the script. See the definition of smScriptOperStatus for
         a description of the values.

         When the smScriptAdminStatus object is set to `enabled' and
         the smScriptOperStatus is `disabled' or one of the error
         states, the Script MIB implementation will `pull' the script
         source from the URL contained in the smScriptSource object
         if the URL is not empty."
    DEFVAL { disabled }
    ::= { smScriptEntry 6 }

smScriptOperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2),
                    editing(3),
                    retrieving(4),
                    compiling(5),
                    noSuchScript(6),
                    accessDenied(7),
                    wrongLanguage(8),
                    wrongVersion(9),
                    compilationFailed(10),
                    noResourcesLeft(11),
                    unknownProtocol(12),
                    protocolFailure(13),
                    genericError(14)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The actual status of the script in the runtime system. The
         value of this object is only meaningful when the value of
         the smScriptRowStatus object is `active'.

         The smScriptOperStatus object may have the following values:

         - `enabled' indicates that the script is available and can
            be started by a launch table entry.

         - `disabled' indicates that the script can not be used.

         - `editing' indicates that the script can be modified in the
           smCodeTable.

         - `retrieving' indicates that the script is currently being
           loaded from non-volatile storage or a remote system.

         - `compiling' indicates that the script is currently being
           compiled by the runtime system.

         - `noSuchScript' indicates that the script does not exist
           at the smScriptSource.

         - `accessDenied' indicates that the script can not be loaded
           from the smScriptSource due to a lack of permissions.

         - `wrongLanguage' indicates that the script can not be
            loaded from the smScriptSource because of a language
            mismatch.

         - `wrongVersion' indicates that the script can not be loaded
           from the smScriptSource because of a language version
           mismatch.

         - `compilationFailed' indicates that the compilation failed.

         - `noResourcesLeft' indicates that the runtime system does
           not have enough resources to load the script.

         - `unknownProtocol' indicates that the script could not be
           loaded from the smScriptSource because the requested
           protocol is not supported.

         - `protocolFailure' indicates that the script could not be
           loaded from the smScriptSource because of a protocol
           failure.

         - `genericError' indicates that the script could not be

           loaded due to an error condition not listed above.

         The `retrieving' and `compiling' states are transient states
         which will either lead to one of the error states or the
         `enabled' state. The `disabled' and `editing' states are
         administrative states which are only reached by explicit
         management operations.

         All launch table entries that refer to this script table
         entry shall have an smLaunchOperStatus value of `disabled'
         when the value of this object is not `enabled'."
    DEFVAL { disabled }
    ::= { smScriptEntry 7 }

smScriptStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object defines whether this row and the script
         controlled by this row are kept in volatile storage and
         lost upon reboot or if this row is backed up by
         non-volatile or permanent storage.

         The storage type of this row always complies with the value
         of this entry if the value of the corresponding RowStatus
         object is `active'.

         However, the storage type of the script controlled by this
         row may be different, if the value of this entry is
         `non-volatile'. The script controlled by this row is written
         into local non-volatile storage if the following condition
         becomes true:

         (a) the URL contained in the smScriptSource object is empty
             and
         (b) the smScriptStorageType is `nonVolatile'
             and
         (c) the smScriptOperStatus is `enabled'

         Setting this object to `volatile' removes a script from
         non-volatile storage if the script controlled by this row
         has been in non-volatile storage before. Attempts to set
         this object to permanent will always fail with an
         inconsistentValue error.

         The value of smScriptStorageType is only meaningful if the
         value of the corresponding RowStatus object is `active'.

         If smScriptStorageType has the value permanent(4), then all
         objects whose MAX-ACCESS value is read-create must be
         writable, with the exception of the smScriptStorageType and
         smScriptRowStatus objects, which shall be read-only."
    DEFVAL { volatile }
    ::= { smScriptEntry 8 }

smScriptRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A control that allows entries to be added and removed from
         this table.

         Changing the smScriptRowStatus from `active' to
         `notInService' will remove the associated script from the
         runtime system.

         Deleting conceptual rows from this table may affect the
         deletion of other resources associated with this row. For
         example, a script stored in non-volatile storage may be
         removed from non-volatile storage.

         An entry may not exist in the `active' state unless all
         required objects in the entry have appropriate values. Rows
         that are not complete or not in service are not known by the
         script runtime system.

         Attempts to `destroy' a row or to set a row `notInService'
         while the smScriptOperStatus is `enabled' will result in an
         inconsistentValue error.

         Attempts to `destroy' a row or to set a row `notInService'
         where the value of the smScriptStorageType object is
         `permanent' or `readOnly' will result in an
         inconsistentValue error.

         The value of this object has no effect on whether other
         objects in this conceptual row can be modified."
    ::= { smScriptEntry 9 }

smScriptError OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains a descriptive error message if the

         transition into the operational status `enabled' failed.
         Implementations must reset the error message to a
         zero-length string when a new attempt to change the
         script status to `enabled' is started."
    DEFVAL { ''H }
    ::= { smScriptEntry 10 }

smScriptLastChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The date and time when this script table entry was last
         modified. The value '0000000000000000'H is returned if
         the script table entry has not yet been modified.

         Note that the resetting of smScriptError is not considered
         a change of the script table entry."
    DEFVAL { '0000000000000000'H }
    ::= { smScriptEntry 11 }

--
-- Access to script code via SNMP
--
-- The smCodeTable allows script code to be read and modified
-- via SNMP.
--

smCodeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SmCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains the script code for scripts that are
         written via SNMP write operations."
    ::= { smScriptObjects 2 }

smCodeEntry OBJECT-TYPE
    SYNTAX      SmCodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry describing a particular fragment of a script."
    INDEX { smScriptOwner, smScriptName, smCodeIndex }
    ::= { smCodeTable 1 }

SmCodeEntry ::= SEQUENCE {
    smCodeIndex         Unsigned32,
    smCodeText          OCTET STRING,
    smCodeRowStatus     RowStatus
}

smCodeIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index value identifying this code fragment."
    ::= { smCodeEntry 1 }

smCodeText OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..1024))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The code that makes up a fragment of a script. The format
         of this code fragment depends on the script language which
         is identified by the associated smScriptLanguage object."
    ::= { smCodeEntry 2 }

smCodeRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A control that allows entries to be added and removed from
         this table.

         The value of this object has no effect on whether other
         objects in this conceptual row can be modified."
    ::= { smCodeEntry 3 }

--
-- Script execution.
--
-- This group defines tables which allow script execution to be
-- initiated, suspended, resumed, and terminated.  It also provides
-- a mechanism for keeping a history of recent script executions
-- and their results.
--

smRunObjects OBJECT IDENTIFIER ::= { smObjects 4 }