smxFS + MMC/SD Driver Demo for Embedded Artists NXP LPC2468 OEM Board
---------------------------------------------------------------------

What you need to run the demo

   1. Embedded Artists NXP LPC2468 OEM Board
   2. IAR EWARM v4.41
   3. J-Link or other IAR supported JTAG unit
   4. MMC or SD card

This demo was built from the smx kernel and smxFS + MMC/SD Card Driver. 
You can download and run it on the board using the IAR debugger, as 
described below.

lpc2468-fs-mmcsd.d79:

This demo will automatically mount the MMC or SD card by FAT file system 
and create some files on it and read back the contents of the files to 
check if it works correctly. Connect a terminal to UART#1 115200-N-8-1
to see the status messages of this demo.

Downloading to the Target:

1. Open the project file in IAR EWARM. Note that nothing can be built;
   the project file is just provided as a wrapper around the program
   image to allow the debugger to download it.

2. Click the Debug button. When the download finishes, press the Run button.

Support:

   Yingbo Hu <yingbohu@smxrtos.com>

Micro Digital Inc
February 13, 2008