/*
  LED.H file
  LED基本操作——開LED，關LED
  作者：Computer-lov
  建立日期：2006-3-19
  修改日期：2006-3-20
  版本：V1.0
  版權所有，盜版必究。
  Copyright(C) Computer-lov 2006-2016
  All rigths reserved
*/

#ifndef __LED_H__
#define __LED_H__

#define LED1    1	 //P01
#define LED4 	0	 //P30
#define LED5    1	 //P31
#define LED6    2	 //P32
#define LED7    3	 //P33
#define LED8    4	 //P24
#define LED9    5	 //P25
#define LED10   6	 //P26

#define EN_LED1()  {GP0CON &=~(uint32)(0x0F<<(LED1*4)); GP0DAT |=1<<(LED1+24);}	   /*使能LED1，即將LED1對應的口設置為輸出*/
#define EN_LED4()  {GP3CON &=~(uint32)(0x0F<<(LED4*4)); GP3DAT |=1<<(LED4+24);}
#define EN_LED5()  {GP3CON &=~(uint32)(0x0F<<(LED5*4)); GP3DAT |=1<<(LED5+24);}
#define EN_LED6()  {GP3CON &=~(uint32)(0x0F<<(LED6*4)); GP3DAT |=1<<(LED6+24);}
#define EN_LED7()  {GP3CON &=~(uint32)(0x0F<<(LED7*4)); GP3DAT |=1<<(LED7+24);}
#define EN_LED8()  {GP2CON &=~(uint32)(0x0F<<(LED8*4)); GP2DAT |=1<<(LED8+24);}
#define EN_LED9()  {GP2CON &=~(uint32)(0x0F<<(LED9*4)); GP2DAT |=1<<(LED9+24);}
#define EN_LED10() {GP2CON &=~(uint32)(0x0F<<(LED10*4));GP2DAT |=1<<(LED10+24);}   



#define OFF_LED1()    GP0SET=(1<<(LED1+16)) 	 //開LED1
#define OFF_LED4()    GP3SET=(1<<(LED4+16)) 
#define OFF_LED5()    GP3SET=(1<<(LED5+16)) 
#define OFF_LED6()    GP3SET=(1<<(LED6+16)) 
#define OFF_LED7()    GP3SET=(1<<(LED7+16)) 
#define OFF_LED8()    GP2SET=(1<<(LED8+16)) 
#define OFF_LED9()    GP2SET=(1<<(LED9+16)) 
#define OFF_LED10()   GP2SET=(1<<(LED10+16)) 


#define ON_LED1()    GP0CLR=(1<<(LED1+16))  //關LED1
#define ON_LED4()    GP3CLR=(1<<(LED4+16)) 
#define ON_LED5()    GP3CLR=(1<<(LED5+16)) 
#define ON_LED6()    GP3CLR=(1<<(LED6+16)) 
#define ON_LED7()    GP3CLR=(1<<(LED7+16)) 
#define ON_LED8()    GP2CLR=(1<<(LED8+16)) 
#define ON_LED9()    GP2CLR=(1<<(LED9+16)) 
#define ON_LED10()   GP2CLR=(1<<(LED10+16)) 

#endif