#include"comm.h"
#include"ds1307.h"
#include"twi.h"


/*************DS1307操作**************開始**************/
//對DS1307內存連續的寫操作
uchar rtc_write(uchar addr,uchar *buf,uchar len)
{
	uchar i;
	
	twi_start();
	DelayMs(10);
	twi_writebyte(DS1307_ADDR|TW_WRITE);
	DelayMs(10);
	twi_writebyte(addr);//write address
	DelayMs(10);
	for(i=0;i<len;i++)
	{
		twi_writebyte(buf[i]);
		DelayMs(10);
		}
	twi_stop();
	return 0;
}

//對DS1307內存連續的讀操作
uchar rtc_read(uchar addr,uchar *buf,uchar len)
{
	uchar i;
	
	rtc_write(addr,0,0);//set address
	
	DelayMs(10);
	
	twi_start();
	DelayMs(10);
	twi_writebyte(DS1307_ADDR|TW_READ);
	for(i=0;i<len-1;i++)
	{
		twi_readbyte(buf+i,TW_ACK);
	DelayMs(10);
	}
	twi_readbyte(buf+i,TW_NACK);
	DelayMs(10);
	twi_stop();
	return 0;
}
/*************DS1307操作**************結束**************/

/*************接口部分****************開始**************/



//更新或讀取DS1307日歷/時間數據
uchar RtcUpdateData(uchar direction)
{
	uchar ret;
	if(direction)	//讀
		ret=rtc_read(0,g_aTimeBuf,7);
	else			//寫
		ret=rtc_write(0,g_aTimeBuf,7);	

	return ret;
}
//讀DS1307用戶RAM
uchar RtcReadRAM(uchar addr,uchar *buf,uchar len)
{
	addr+=8;
	return rtc_read(addr,buf,len);
}
//寫DS1307用戶RAM
uchar RtcWriteRAM(uchar addr,uchar *buf,uchar len)
{
	addr+=8;
	return rtc_write(addr,buf,len);
}

uchar byte_bintobcd(uchar bin)
{
	uchar ret;
	bin&=0x7f;
	bin%=100;
	ret=bin/10;
	ret <<=4;
	ret|=bin%10;
	return ret;
}
uchar byte_bcdtobin(uchar bcd)
{
	uchar ret;
	ret=bcd & 0x0f;
	ret+=(bcd>>4)*10;
	return ret;		
}

//將二進制格式緩沖區(g_aTimeBin)內容轉換成BCD格式后保存到BCD格式緩沖區(g_aTimeBuf)
void RtcBinToBCD()
{
	uchar i;
	g_aTimeBin[0]&=0x7f;
	g_aTimeBin[1]&=0x7f;

	g_aTimeBin[2]&=0x3f;
    

	g_aTimeBin[3]&=0x07;
	

	g_aTimeBin[4]&=0x3f;
	g_aTimeBin[5]&=0x1f;	
	g_aTimeBin[6]&=0xff;
	
	for(i=0;i<7;i++)
		g_aTimeBuf[i]=byte_bintobcd(g_aTimeBin[i]);
}

//將BCD格式緩沖區(g_aTimeBuf)內容轉換成二進制格式后保存到二進制格式緩沖區(g_aTimeBin)
void RtcBCDToBin()
{
	uchar i;
	for(i=0;i<7;i++)
		g_aTimeBin[i]=byte_bcdtobin(g_aTimeBuf[i]);
}

//寫DS1307配置字節
void RtcSetSQWOutput(uchar en,uchar level)
{
	//en:方波輸出允許 TRUE 有效 level:如果輸出禁止 OUT口的邏輯電平
	uchar c=0;
	if(en)	//enable
		c=0x10;
	else	//disable
	{
		if(level)
			c=0x80;
	}
	rtc_write(7,&c,1);
}
/*************接口部分***************結束**************/