/**
  ******************************************************************************
  * @file    stm32f10x_i2c.h
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file contains all the functions prototypes for the I2C firmware 
  *          library.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_I2C_H
#define __STM32F10x_I2C_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */

/** @addtogroup I2C
  * @{
  */

/** @defgroup I2C_Exported_Types
  * @{
  */

/** 
  * @brief  I2C Init structure definition  
  */

typedef struct
{
  uint32_t I2C_ClockSpeed;          /*!< Specifies the clock frequency.
                                         This parameter must be set to a value lower than 400kHz */

  uint16_t I2C_Mode;                /*!< Specifies the I2C mode.
                                         This parameter can be a value of @ref I2C_mode */

  uint16_t I2C_DutyCycle;           /*!< Specifies the I2C fast mode duty cycle.
                                         This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */

  uint16_t I2C_OwnAddress1;         /*!< Specifies the first device own address.
                                         This parameter can be a 7-bit or 10-bit address. */

  uint16_t I2C_Ack;                 /*!< Enables or disables the acknowledgement.
                                         This parameter can be a value of @ref I2C_acknowledgement */

  uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
                                         This parameter can be a value of @ref I2C_acknowledged_address */
}I2C_InitTypeDef;

/**
  * @}
  */ 


/** @defgroup I2C_Exported_Constants
  * @{
  */

#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
                                   ((PERIPH) == I2C2))
/** @defgroup I2C_mode 
  * @{
  */

#define I2C_Mode_I2C                    ((uint16_t)0x0000)
#define I2C_Mode_SMBusDevice            ((uint16_t)0x0002)  
#define I2C_Mode_SMBusHost              ((uint16_t)0x000A)
#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
                           ((MODE) == I2C_Mode_SMBusDevice) || \
                           ((MODE) == I2C_Mode_SMBusHost))
/**
  * @}
  */

/** @defgroup I2C_duty_cycle_in_fast_mode 
  * @{
  */

#define I2C_DutyCycle_16_9              ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
#define I2C_DutyCycle_2                 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
                                  ((CYCLE) == I2C_DutyCycle_2))
/**
  * @}
  */ 

/** @defgroup I2C_acknowledgement
  * @{
  */

#define I2C_Ack_Enable                  ((uint16_t)0x0400)
#define I2C_Ack_Disable                 ((uint16_t)0x0000)
#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
                                 ((STATE) == I2C_Ack_Disable))
/**
  * @}
  */

/** @defgroup I2C_transfer_direction 
  * @{
  */

#define  I2C_Direction_Transmitter      ((uint8_t)0x00)
#define  I2C_Direction_Receiver         ((uint8_t)0x01)
#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
                                     ((DIRECTION) == I2C_Direction_Receiver))
/**
  * @}
  */

/** @defgroup I2C_acknowledged_address 
  * @{
  */

#define I2C_AcknowledgedAddress_7bit    ((uint16_t)0x4000)
#define I2C_AcknowledgedAddress_10bit   ((uint16_t)0xC000)
#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
                                             ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
/**
  * @}
  */ 

/** @defgroup I2C_registers 
  * @{
  */

#define I2C_Register_CR1                ((uint8_t)0x00)
#define I2C_Register_CR2                ((uint8_t)0x04)
#define I2C_Register_OAR1               ((uint8_t)0x08)
#define I2C_Register_OAR2               ((uint8_t)0x0C)
#define I2C_Register_DR                 ((uint8_t)0x10)
#define I2C_Register_SR1                ((uint8_t)0x14)
#define I2C_Register_SR2                ((uint8_t)0x18)
#define I2C_Register_CCR                ((uint8_t)0x1C)
#define I2C_Register_TRISE              ((uint8_t)0x20)
#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
                                   ((REGISTER) == I2C_Register_CR2) || \
                                   ((REGISTER) == I2C_Register_OAR1) || \
                                   ((REGISTER) == I2C_Register_OAR2) || \
                                   ((REGISTER) == I2C_Register_DR) || \
                                   ((REGISTER) == I2C_Register_SR1) || \
                                   ((REGISTER) == I2C_Register_SR2) || \
                                   ((REGISTER) == I2C_Register_CCR) || \
                                   ((REGISTER) == I2C_Register_TRISE))
/**
  * @}
  */

/** @defgroup I2C_SMBus_alert_pin_level 
  * @{
  */

#define I2C_SMBusAlert_Low              ((uint16_t)0x2000)
#define I2C_SMBusAlert_High             ((uint16_t)0xDFFF)
#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
                                   ((ALERT) == I2C_SMBusAlert_High))
/**
  * @}
  */

/** @defgroup I2C_PEC_position 
  * @{
  */

#define I2C_PECPosition_Next            ((uint16_t)0x0800)
#define I2C_PECPosition_Current         ((uint16_t)0xF7FF)
#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
                                       ((POSITION) == I2C_PECPosition_Current))
/**
  * @}
  */ 

/** @defgroup I2C_NCAK_position 
  * @{
  */

#define I2C_NACKPosition_Next           ((uint16_t)0x0800)
#define I2C_NACKPosition_Current        ((uint16_t)0xF7FF)
#define IS_I2C_NACK_POSITION(POSITION)  (((POSITION) == I2C_NACKPosition_Next) || \
                                         ((POSITION) == I2C_NACKPosition_Current))
/**
  * @}
  */ 

/** @defgroup I2C_interrupts_definition 
  * @{
  */

#define I2C_IT_BUF                      ((uint16_t)0x0400)
#define I2C_IT_EVT                      ((uint16_t)0x0200)
#define I2C_IT_ERR                      ((uint16_t)0x0100)
#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
/**
  * @}
  */ 

/** @defgroup I2C_interrupts_definition 
  * @{
  */

#define I2C_IT_SMBALERT                 ((uint32_t)0x01008000)
#define I2C_IT_TIMEOUT                  ((uint32_t)0x01004000)
#define I2C_IT_PECERR                   ((uint32_t)0x01001000)
#define I2C_IT_OVR                      ((uint32_t)0x01000800)
#define I2C_IT_AF                       ((uint32_t)0x01000400)
#define I2C_IT_ARLO                     ((uint32_t)0x01000200)
#define I2C_IT_BERR                     ((uint32_t)0x01000100)
#define I2C_IT_TXE                      ((uint32_t)0x06000080)
#define I2C_IT_RXNE                     ((uint32_t)0x06000040)
#define I2C_IT_STOPF                    ((uint32_t)0x02000010)
#define I2C_IT_ADD10                    ((uint32_t)0x02000008)
#define I2C_IT_BTF                      ((uint32_t)0x02000004)
#define I2C_IT_ADDR                     ((uint32_t)0x02000002)
#define I2C_IT_SB                       ((uint32_t)0x02000001)

#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))

#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
                           ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
                           ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
                           ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
                           ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
                           ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
                           ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
/**
  * @}
  */

/** @defgroup I2C_flags_definition 
  * @{
  */

/** 
  * @brief  SR2 register flags  
  */

#define I2C_FLAG_DUALF                  ((uint32_t)0x00800000)
#define I2C_FLAG_SMBHOST                ((uint32_t)0x00400000)
#define I2C_FLAG_SMBDEFAULT             ((uint32_t)0x00200000)
#define I2C_FLAG_GENCALL                ((uint32_t)0x00100000)
#define I2C_FLAG_TRA                    ((uint32_t)0x00040000)
#define I2C_FLAG_BUSY                   ((uint32_t)0x00020000)
#define I2C_FLAG_MSL                    ((uint32_t)0x00010000)

/** 
  * @brief  SR1 register flags  
  */

#define I2C_FLAG_SMBALERT               ((uint32_t)0x10008000)
#define I2C_FLAG_TIMEOUT                ((uint32_t)0x10004000)
#define I2C_FLAG_PECERR                 ((uint32_t)0x10001000)
#define I2C_FLAG_OVR                    ((uint32_t)0x10000800)
#define I2C_FLAG_AF                     ((uint32_t)0x10000400)
#define I2C_FLAG_ARLO                   ((uint32_t)0x10000200)
#define I2C_FLAG_BERR                   ((uint32_t)0x10000100)
#define I2C_FLAG_TXE                    ((uint32_t)0x10000080)
#define I2C_FLAG_RXNE                   ((uint32_t)0x10000040)
#define I2C_FLAG_STOPF                  ((uint32_t)0x10000010)
#define I2C_FLAG_ADD10                  ((uint32_t)0x10000008)
#define I2C_FLAG_BTF                    ((uint32_t)0x10000004)
#define I2C_FLAG_ADDR                   ((uint32_t)0x10000002)
#define I2C_FLAG_SB                     ((uint32_t)0x10000001)

#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))

#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
                               ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
                               ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
                               ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
                               ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
                               ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
                               ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
                               ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
                               ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
                               ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
                               ((FLAG) == I2C_FLAG_SB))
/**
  * @}
  */

/** @defgroup I2C_Events 
  * @{
  */

/*========================================
     
                     I2C Master Events (Events grouped in order of communication)
                                                        ==========================================*/
/** 
  * @brief  Communication start
  * 
  * After sending the START condition (I2C_GenerateSTART() function) the master 
  * has to wait for this event. It means that the Start condition has been correctly 
  * released on the I2C bus (the bus is free, no other devices is communicating).
  * 
  */
/* --EV5 */
#define  I2C_EVENT_MASTER_MODE_SELECT                      ((uint32_t)0x00030001)  /* BUSY, MSL and SB flag */

/** 
  * @brief  Address Acknowledge
  * 
  * After checking on EV5 (start condition correctly released on the bus), the 
  * master sends the address of the slave(s) with which it will communicate 
  * (I2C_Send7bitAddress() function, it also determines the direction of the communication: 
  * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges 
  * his address. If an acknowledge is sent on the bus, one of the following events will 
  * be set:
  * 
  *  1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED 
  *     event is set.
  *  
  *  2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED 
  *     is set
  *  
  *  3) In case of 10-Bit addressing mode, the master (just after generating the START 
  *  and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() 
  *  function). Then master should wait on EV9. It means that the 10-bit addressing 
  *  header has been correctly sent on the bus. Then master should send the second part of 
  *  the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master 
  *  should wait for event EV6. 
  *