/** ###################################################################
**     THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
**     Filename  : Bit_Relay.C
**     Project   : vvvf_56F8346
**     Processor : 56F8346
**     Beantype  : BitIO
**     Version   : Bean 02.066, Driver 01.14, CPU db: 2.87.097
**     Compiler  : Metrowerks DSP C Compiler
**     Date/Time : 2008-3-7, 9:38
**     Abstract  :
**         This bean "BitIO" implements an one-bit input/output.
**         It uses one bit/pin of a port.
**         Methods of this bean are mostly implemented as a macros
**         (if supported by target language and compiler).
**     Settings  :
**         Used pin                    :
**             ----------------------------------------------------
**                Number (on package)  |    Name
**             ----------------------------------------------------
**                       114           |  GPIOC9_ISA1
**             ----------------------------------------------------
**
**         Port name                   : GPIOC_High
**
**         Bit number (in port)        : 9
**         Bit mask of the port        : 512
**
**         Initial direction           : Output (direction can be changed)
**         Safe mode                   : yes
**         Initial output value        : 0
**         Initial pull option         : off
**
**         Port data register          : GPIO_C_DR [62225]
**         Port control register       : GPIO_C_DDR [62226]
**         Port function register      : GPIO_C_PER [62227]
**
**         Optimization for            : speed
**     Contents  :
**         SetDir - void Bit_Relay_SetDir(bool Dir);
**         GetVal - bool Bit_Relay_GetVal(void);
**         PutVal - void Bit_Relay_PutVal(bool Val);
**         ClrVal - void Bit_Relay_ClrVal(void);
**         SetVal - void Bit_Relay_SetVal(void);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2005
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : info@processorexpert.com
** ###################################################################*/

/* MODULE Bit_Relay. */

#include "Bit_Relay.h"
/*Include shared modules, which are used for whole project*/
#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"

#include "Cpu.h"


/*
** ===================================================================
**     Method      :  Bit_Relay_GetVal (bean BitIO)
**
**     Description :
**         This method returns an input value.
**           a) direction = Input  : reads the input value from the
**                                   pin and returns it
**           b) direction = Output : returns the last written value
**     Parameters  : None
**     Returns     :
**         ---             - Input value. Possible values:
**                           FALSE - logical "0" (Low level)
**                           TRUE - logical "1" (High level)

** ===================================================================
*/
/*
bool Bit_Relay_GetVal(void)

**  This method is implemented as a macro. See Bit_Relay.h file.  **

*/

/*
** ===================================================================
**     Method      :  Bit_Relay_PutVal (bean BitIO)
**
**     Description :
**         This method writes the new output value.
**           a) direction = Input  : sets the new output value;
**                                   this operation will be shown on
**                                   output after the direction has
**                                   been switched to output
**                                   (SetDir(TRUE);)
**           b) direction = Output : directly writes the value to the
**                                   appropriate pin
**     Parameters  :
**         NAME       - DESCRIPTION
**         Val             - Output value. Possible values:
**                           FALSE - logical "0" (Low level)
**                           TRUE - logical "1" (High level)
**     Returns     : Nothing
** ===================================================================
*/
void Bit_Relay_PutVal(bool Val)
{
  if (Val) {                           /* Is it one to be written? */
    Shadow_GPIO_C_DR |= Bit_Relay_PIN_MASK; /* Set bit in shadow variable */
    setRegBits(GPIO_C_DR,Bit_Relay_PIN_MASK); /* Set bit on port */
  }
  else {                               /* Is it zero to be written? */
    Shadow_GPIO_C_DR &= ~Bit_Relay_PIN_MASK; /* Clear bit in shadow variable */
    clrRegBits(GPIO_C_DR,Bit_Relay_PIN_MASK); /* Clear bit on port */
  }
}

/*
** ===================================================================
**     Method      :  Bit_Relay_SetVal (bean BitIO)
**
**     Description :
**         This method sets (sets to one) the output value.
**           a) direction = Input  : sets the output value to "1";
**                                   this operation will be shown on
**                                   output after the direction has
**                                   been switched to output
**                                   (SetDir(TRUE);)
**           b) direction = Output : directly writes "1" to the
**                                   appropriate pin
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
/*
void Bit_Relay_SetVal(void)

**  This method is implemented as a macro. See Bit_Relay.h file.  **
*/

/*
** ===================================================================
**     Method      :  Bit_Relay_ClrVal (bean BitIO)
**
**     Description :
**         This method clears (sets to zero) the output value.
**           a) direction = Input  : sets the output value to "0";
**                                   this operation will be shown on
**                                   output after the direction has
**                                   been switched to output
**                                   (SetDir(TRUE);)
**           b) direction = Output : directly writes "0" to the
**                                   appropriate pin
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
/*
void Bit_Relay_ClrVal(void)

**  This method is implemented as a macro. See Bit_Relay.h file.  **
*/

/*
** ===================================================================
**     Method      :  Bit_Relay_SetDir (bean BitIO)
**
**     Description :
**         This method sets direction of the bean.
**     Parameters  :
**         NAME       - DESCRIPTION
**         Dir        - Direction to set (FALSE or TRUE)
**                      FALSE = Input, TRUE = Output
**     Returns     : Nothing
** ===================================================================
*/
void Bit_Relay_SetDir(bool Dir)
{
  if (Dir) {                           /* Is given direction output? */
    setReg(GPIO_C_DR,((getReg(GPIO_C_DR)) & ~Bit_Relay_PIN_MASK) | (Shadow_GPIO_C_DR & Bit_Relay_PIN_MASK)); /* Restore correct value of output from shadow variable */
    setRegBits(GPIO_C_DDR,Bit_Relay_PIN_MASK); /* Set direction to output */
  }
  else {                               /* Is given direction input? */
    clrRegBits(GPIO_C_DDR,Bit_Relay_PIN_MASK); /* Set direction to input */
  }
}

/* END Bit_Relay. */

/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 2.97 [03.74]
**     for the Freescale 56800 series of microcontrollers.
**
** ###################################################################
*/