/* DVB USB compliant Linux driver for the *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) * * Thanks to GENPIX for the sample code used to implement this module. * * This module is based off the vp7045 and vp702x modules * *	This program is free software; you can redistribute it and/or modify it *	under the terms of the GNU General Public License as published by the Free *	Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */#include "gp8psk.h"/* debug */static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";int dvb_usb_gp8psk_debug;module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen){	int ret = 0,try = 0;	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))		return ret;	while (ret >= 0 && ret != blen && try < 3) {		ret = usb_control_msg(d->udev,			usb_rcvctrlpipe(d->udev,0),			req,			USB_TYPE_VENDOR | USB_DIR_IN,			value,index,b,blen,			2000);		deb_info("reading number %d (ret: %d)\n",try,ret);		try++;	}	if (ret < 0 || ret != blen) {		warn("usb in %d operation failed.", req);		ret = -EIO;	} else		ret = 0;	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);	debug_dump(b,blen,deb_xfer);	mutex_unlock(&d->usb_mutex);	return ret;}int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,			     u16 index, u8 *b, int blen){	int ret;	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);	debug_dump(b,blen,deb_xfer);	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))		return ret;	if (usb_control_msg(d->udev,			usb_sndctrlpipe(d->udev,0),			req,			USB_TYPE_VENDOR | USB_DIR_OUT,			value,index,b,blen,			2000) != blen) {		warn("usb out operation failed.");		ret = -EIO;	} else		ret = 0;	mutex_unlock(&d->usb_mutex);	return ret;}static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d){	int ret;	const struct firmware *fw = NULL;	const u8 *ptr;	u8 *buf;	if ((ret = request_firmware(&fw, bcm4500_firmware,					&d->udev->dev)) != 0) {		err("did not find the bcm4500 firmware file. (%s) "			"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",			bcm4500_firmware,ret);		return ret;	}	ret = -EINVAL;	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))		goto out_rel_fw;	info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);	ptr = fw->data;	buf = kmalloc(64, GFP_KERNEL | GFP_DMA);	while (ptr[0] != 0xff) {		u16 buflen = ptr[0] + 4;		if (ptr + buflen >= fw->data + fw->size) {			err("failed to load bcm4500 firmware.");			goto out_free;		}		memcpy(buf, ptr, buflen);		if (dvb_usb_generic_write(d, buf, buflen)) {			err("failed to load bcm4500 firmware.");			goto out_free;		}		ptr += buflen;	}	ret = 0;out_free:	kfree(buf);out_rel_fw:	release_firmware(fw);	return ret;}static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff){	u8 status, buf;	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);	if (onoff) {		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);		if (! (status & bm8pskStarted)) {  /* started */			if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))				return -EINVAL;		}		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)			if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */				if(gp8psk_load_bcm4500fw(d))					return -EINVAL;		if (! (status & bmIntersilOn)) /* LNB Power */			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,					&buf, 1))				return -EINVAL;		/* Set DVB mode to 1 */		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)			if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))				return -EINVAL;		/* Abort possible TS (if previous tune crashed) */		if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))			return -EINVAL;	} else {		/* Turn off LNB power */		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))			return -EINVAL;		/* Turn off 8psk power */		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))			return -EINVAL;		if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)			gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);	}	return 0;}#if 0int gp8psk_bcm4500_reload(struct dvb_usb_device *d){	u8 buf;	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);	/* Turn off 8psk power */	if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))		return -EINVAL;	/* Turn On 8psk power */	if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))		return -EINVAL;	/* load BCM4500 firmware */	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)		if (gp8psk_load_bcm4500fw(d))			return EINVAL;	return 0;}#endif  /*  0  */static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff){	return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);}static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap){	adap->fe = gp8psk_fe_attach(adap->dev);	return 0;}static struct dvb_usb_device_properties gp8psk_properties;static int gp8psk_usb_probe(struct usb_interface *intf,		const struct usb_device_id *id){	int ret;	struct usb_device *udev = interface_to_usbdev(intf);	ret = dvb_usb_device_init(intf, &gp8psk_properties,				  THIS_MODULE, NULL, adapter_nr);	if (ret == 0) {		info("found Genpix USB device pID = %x (hex)",			le16_to_cpu(udev->descriptor.idProduct));	}	return ret;}static struct usb_device_id gp8psk_usb_table [] = {	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },	    { 0 },};MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);static struct dvb_usb_device_properties gp8psk_properties = {	.usb_ctrl = CYPRESS_FX2,	.firmware = "dvb-usb-gp8psk-01.fw",	.num_adapters = 1,	.adapter = {		{			.streaming_ctrl   = gp8psk_streaming_ctrl,			.frontend_attach  = gp8psk_frontend_attach,			/* parameter for the MPEG2-data transfer */			.stream = {				.type = USB_BULK,				.count = 7,				.endpoint = 0x82,				.u = {					.bulk = {						.buffersize = 8192,					}				}			},		}	},	.power_ctrl       = gp8psk_power_ctrl,	.generic_bulk_ctrl_endpoint = 0x01,	.num_device_descs = 4,	.devices = {		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",		  .cold_ids = { &gp8psk_usb_table[0], NULL },		  .warm_ids = { &gp8psk_usb_table[1], NULL },		},		{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",		  .cold_ids = { NULL },		  .warm_ids = { &gp8psk_usb_table[2], NULL },		},		{ .name = "Genpix SkyWalker-1 DVB-S receiver",		  .cold_ids = { NULL },		  .warm_ids = { &gp8psk_usb_table[3], NULL },		},		{ .name = "Genpix SkyWalker-CW3K DVB-S receiver",		  .cold_ids = { NULL },		  .warm_ids = { &gp8psk_usb_table[4], NULL },		},		{ NULL },	}};/* usb specific object needed to register this driver with the usb subsystem */static struct usb_driver gp8psk_usb_driver = {	.name		= "dvb_usb_gp8psk",	.probe		= gp8psk_usb_probe,	.disconnect = dvb_usb_device_exit,	.id_table	= gp8psk_usb_table,};/* module stuff */static int __init gp8psk_usb_module_init(void){	int result;	if ((result = usb_register(&gp8psk_usb_driver))) {		err("usb_register failed. (%d)",result);		return result;	}	return 0;}static void __exit gp8psk_usb_module_exit(void){	/* deregister this driver from the USB subsystem */	usb_deregister(&gp8psk_usb_driver);}module_init(gp8psk_usb_module_init);module_exit(gp8psk_usb_module_exit);MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");MODULE_VERSION("1.1");MODULE_LICENSE("GPL");