/* $Id: mtio.h,v 1.4 1992/11/18 01:32:03 root Exp root $ * * linux/mtio.h header file for Linux. Written by H. Bergman */#ifndef _LINUX_MTIO_H#define _LINUX_MTIO_H#include <linux/ioctl.h>/* * Structures and definitions for mag tape io control commands *//* structure for MTIOCTOP - mag tape op command */struct	mtop {	short	mt_op;		/* operations defined below */	int	mt_count;	/* how many of them */};/* Magnetic Tape operations [Not all operations supported by all drivers]: */#define MTRESET 0	/* +reset drive in case of problems */#define MTFSF	1	/* forward space over FileMark,			 * position at first record of next file 			 */#define MTBSF	2	/* backward space FileMark (position before FM) */#define MTFSR	3	/* forward space record */#define MTBSR	4	/* backward space record */#define MTWEOF	5	/* write an end-of-file record (mark) */#define MTREW	6	/* rewind */#define MTOFFL	7	/* rewind and put the drive offline (eject?) */#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */#define MTRETEN 9	/* retension tape */#define MTBSFM	10	/* +backward space FileMark, position at FM */#define MTFSFM  11	/* +forward space FileMark, position at FM */#define MTEOM	12	/* goto end of recorded media (for appending files).			 * MTEOM positions after the last FM, ready for			 * appending another file.			 */#define MTERASE 13	/* erase tape -- be careful! */#define MTRAS1  14	/* run self test 1 (nondestructive) */#define MTRAS2	15	/* run self test 2 (destructive) */#define MTRAS3  16	/* reserved for self test 3 */#define MTSETBLK 20	/* set block length (SCSI) */#define MTSETDENSITY 21	/* set tape density (SCSI) */#define MTSEEK	22	/* seek to block (Tandberg, etc.) */#define MTTELL	23	/* tell block (Tandber, etc.) */#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */			/* ordinary buffered operation with code 1 *//* structure for MTIOCGET - mag tape get status command */struct	mtget {	long	mt_type;	/* type of magtape device */	long	mt_resid;	/* residual count: (not sure)				 *	number of bytes ignored, or				 *	number of files not skipped, or				 *	number of records not skipped.				 */	/* the following registers are device dependent */	long	mt_dsreg;	/* status register */	long	mt_gstat;	/* generic (device independent) status */	long	mt_erreg;	/* error register */	/* The next two fields are not always used */	daddr_t	mt_fileno;	/* number of current file on tape */	daddr_t	mt_blkno;	/* current block number */};/* * Constants for mt_type. Not all of these are supported. */#define MT_ISUNKNOWN		0x01#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */#define MT_ISDDS1		0x51	/* DDS device without partitions */#define MT_ISDDS2		0x52	/* DDS device with partitions */#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */struct mt_tape_info {	long t_type;		/* device type id (mt_type) */	char *t_name;		/* descriptive name */};#define MT_TAPE_INFO	{ \	{MT_ISUNKNOWN,		"Unknown type of tape device"}, \	{MT_ISQIC02,		"Generic QIC-02 tape streamer"}, \	{MT_ISWT5150,		"Wangtek 5150, QIC-150"}, \	{MT_ISARCHIVE_5945L2,	"Archive 5945L-2"}, \	{MT_ISCMSJ500,		"CMS Jumbo 500"}, \	{MT_ISTDC3610,		"Tandberg TDC 3610, QIC-24"}, \	{MT_ISARCHIVE_VP60I,	"Archive VP60i, QIC-02"}, \	{MT_ISARCHIVE_2150L,	"Archive Viper 2150L"}, \	{MT_ISARCHIVE_2060L,	"Archive Viper 2060L"}, \	{MT_ISWT5099EEN24,	"Wangtek 5099-een24, 60MB"}, \	{MT_ISEVEREX_FT40A,	"Everex FT40A, QIC-40"}, \	{MT_ISSCSI1,		"Generic SCSI-1 tape"}, \	{0, NULL} \}/* structure for MTIOCPOS - mag tape get position command */struct	mtpos {	long 	mt_blkno;	/* current block number */};/* mag tape io control commands */#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position *//* Generic Mag Tape (device independent) status macros for examining * mt_gstat -- HP-UX compatible. * There is room for more generic status bits here, but I don't * know which of them are reserved. At least three or so should * be added to make this really useful. */#define GMT_EOF(x)              ((x) & 0x80000000)#define GMT_BOT(x)              ((x) & 0x40000000)#define GMT_EOT(x)              ((x) & 0x20000000)#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */#define GMT_WR_PROT(x)          ((x) & 0x04000000)/* #define GMT_ ? 		((x) & 0x02000000) */#define GMT_ONLINE(x)           ((x) & 0x01000000)#define GMT_D_6250(x)           ((x) & 0x00800000)#define GMT_D_1600(x)           ((x) & 0x00400000)#define GMT_D_800(x)            ((x) & 0x00200000)/* #define GMT_ ? 		((x) & 0x00100000) *//* #define GMT_ ? 		((x) & 0x00080000) */#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) *//* #define GMT_ ? 		((x) & 0x00020000) */#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode *//* 16 generic status bits unused *//* DDS drives have 'setmarks', sort of like filemarks but used to group * files, rather than blocks. Not used. Not supported. * I think DDS drives are DAT drives. */#endif /* _LINUX_MTIO_H */