/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : main.c
* Author             : MCD Application Team
* Date First Issued  : 02/05/2007
* Description        : Main program body.
********************************************************************************
* History:
* 05/21/2007: V0.3
* 04/02/2007: V0.2
* 02/05/2007: V0.1
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
ErrorStatus HSEStartUpStatus;

/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void NVIC_Configuration(void);
void GPIO_Configuration(void);
void EXTI_Configuration(void);

/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{
#ifdef DEBUG
  debug();
#endif

  /* System Clocks Configuration ---------------------------------------------*/
  RCC_Configuration();
     
  /* GPIO configuration ------------------------------------------------------*/
  GPIO_Configuration();

  /* Check if the system has resumed from WWDG reset -------------------------*/
  if(RCC_GetFlagStatus(RCC_FLAG_WWDGRST) != RESET)
  {	/* WWDGRST flag set */
    /* Turn on led connected to PC.06 */
    GPIO_WriteBit(GPIOC, GPIO_Pin_6, Bit_SET);

	/* Clear reset flags */
    RCC_ClearFlag();
  }
  else
  {	/* WWDGRST flag is not set */
    /* Turn off led connected to PC.06 */
    GPIO_WriteBit(GPIOC, GPIO_Pin_6, Bit_RESET);
  }

  /* Configure EXTI Line9 to generate an interrupt on falling edge -----------*/
  EXTI_Configuration();

/* NVIC configuration --------------------------------------------------------*/
  NVIC_Configuration();

/* WWDG configuration --------------------------------------------------------*/
  /* Enable WWDG clock */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE);

  /* WWDG clock counter = (PCLK1/4096)/8 = 244 Hz (~4 ms)  */
  WWDG_SetPrescaler(WWDG_Prescaler_8);

  /* Set Window value to 0x41 */
  WWDG_SetWindowValue(0x41);

  /* Enable WWDG and set counter value to 0x7F, WWDG timeout = ~4 ms * 64 = 262 ms */
  WWDG_Enable(0x7F);

  /* Clear EWI flag */
  WWDG_ClearFlag();

  /* Enable EW interrupt */
  WWDG_EnableIT();

  while (1)
  {
  }
}

/*******************************************************************************
* Function Name  : RCC_Configuration
* Description    : Configures the different system clocks.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_Configuration(void)
{
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();

  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);

  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();

  if(HSEStartUpStatus == SUCCESS)
  {
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1); 
  
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1); 

    /* PCLK1 = HCLK */
    RCC_PCLK1Config(RCC_HCLK_Div1);

    /* Flash 0 wait state */
    FLASH_SetLatency(FLASH_Latency_0);
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);

    /* Select HSE as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_HSE);

    /* Wait till HSE is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x04)
    {
    }
  }
  
  /* Enable GPIOC, GPIOB and AFIO clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOB |
                         RCC_APB2Periph_AFIO, ENABLE);  
}

/*******************************************************************************
* Function Name  : GPIO_Configuration
* Description    : Configures the different GPIO ports.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Configure PC.06 and PC.07 as Output push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);

  /* Configure PB9 as input floating (EXTI Line9) */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : EXTI_Configuration
* Description    : Configures EXTI Line9.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void EXTI_Configuration(void)
{
  EXTI_InitTypeDef EXTI_InitStructure;

  /* Connect EXTI Line9 to PB.9 */
  GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource9);

  /* Configure EXTI Line9 to generate an interrupt on falling edge */
  EXTI_ClearITPendingBit(EXTI_Line9);
  EXTI_InitStructure.EXTI_Line = EXTI_Line9;
  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  EXTI_Init(&EXTI_InitStructure); 
}

/*******************************************************************************
* Function Name  : NVIC_Configuration
* Description    : Configures NVIC and Vector Table base location.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void NVIC_Configuration(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

  /* 2 bits for Preemption Priority and  2 bits for Sub Priority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);

  NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  NVIC_InitStructure.NVIC_IRQChannel = WWDG_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_Init(&NVIC_InitStructure);
}

#ifdef  DEBUG
/*******************************************************************************
* Function Name  : assert_failed
* Description    : Reports the name of the source file and the source line number
*                  where the assert error has occurred.
* Input          : - file: pointer to the source file name
*                  - line: assert error line source number
* Output         : None
* Return         : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/