[DlgMain]
Caption=APTool
MENU_About=About APTool
HubChangeMsg=Usb hub has changed!
Txt_TimeOut=The Beta version is time out!
Txt_VerInfo=The Beta version,remain %d days!
[AboutDlg]
WND_Caption=About APTool
LB_CopyRight=CopyRight (C) 2012
LB_Company=
LB_Addr=
LB_Website=
LB_TelFax=
BTN_OK=OK
[DlgBaseInfo]
LB_ICType=IC Type:
LB_Device_Count=Count:
LB_Vendor=Vendor Info:
LB_Product=Product Info:
LB_OtherInfo=Eject Info:
LB_MP_Param=MP Param:
[DlgButton]
BTN_AllStart=All &Start
BTN_AllStop=All S&top
BTN_MPSetting=&MPSetting
BTN_Refresh=&Refresh
BTN_Eject=&Eject
BTN_MPLog=MP &Log
BTN_Default=Default
GB_Lock=Lock Disk
RD_AutoLock=Auto
RD_HandLock=Manual
CK_HandLock=Lock
BTN_Exit=&Exit

[DlgDeviceItem]
MI_DEVICE_REFRESH=&Refresh
MI_START_MP=&Start MP
MI_STOP_MP=S&top MP
MI_DEVICE_EJECT=&Eject
MI_DEVICE_INFO=Device &Info
PG0_DS_Analyse=Flash analyse...
PG0_DS_Scanning=Flash scanning...
PG0_DS_WriteCfg=Write cfg table...
PG0_DS_FMT_CF=Format...
PG0_DS_CF=Copyfile...
PG0_DS_OK=MP OK!
PG1_DS_Ready=Ready!
PG1_INFO=MP running...
PG1_DS_Cancel=Cancelled by user!
PG1_DS_Error=MP fail!
[DlgPwd]
WND_Caption=Enter MPSetting
GP_Options=Enter MPSetting
LB_Password=Password:
LB_ChangePwd=Change Password
BTN_OK=&OK
BTN_Cancel=&Cancel
GP_ChangePwd=Change password
LB_NewPwd=New password:
LB_NewPwd2=Confirm password:
BTN_ChangePassword=Change password
LB_ICType=ICType:
[DeviceManager]
ScanMode_0=High scan
ScanMode_0_0=0 Factory Flash
ScanMode_0_1=1 Scanned Flash
ScanMode_0_2=2 Fast Scan
ScanMode_0_3=3 EraseBeforeFastScan
ScanMode_0_Keep=Saving param 
ScanMode_1=Low scan
ScanMode_1_0=1
ScanMode_1_1=2
ScanMode_1_2=3
ScanMode_1_3=4
ScanMode_1_4=5
ScanMode_1_5=6
ScanMode_1_6=Erase
AutoAnalyse=Auto
AutoAnalyse_0=Default
AutoAnalyse_1=Capacity optimization
AutoAnalyse_2=Half capacity
[ErrorInfo]
Err_1=Version error.
Err_2=USB write timeout.
Err_3=USB read timeout.
Err_4=Cancelled by user.
Err_5=Write cfg fail.
Err_6=Physical write fail.
Err_7=Phycical read fail.
Err_8=Cfg not find.
Err_9=High scan not support.
Err_10=Can't find second flash MPinfo.
Err_11=High scan not support.
Err_12=All Bad block,MP fail.
Err_13=MP Version not match.
Err_14=Program error,MP fail.
Err_15=Write cfg fail.
Err_16=Format fail.
Err_17=Build serial number fail.
Err_18=FW code file not exists.
Err_19=RB abnormity!
Err_20=Hardware WP!
Err_21=Unknown flash type.
Err_22=CopyFile fail!
Err_23=Flash WP!
Err_200=cmd error,mp fail!
Err_500=ICType not support!
Err_1002=Download space code fail!
Err_3001=Allocate memory fail!
Err_3002=Scan param error!
Err_3003=Initilize scan object fail!
Err_3004=Page mode is empty!
Err_3005=Fast scan failed!
Err_3006=Erase and fast scan failed!
Err_3007=Download BC fail!
Err_3008=There are too many BC!
Err_3009=Make pageinf fail!

Err_4001=Interface param error!
Err_4002=The necessary file is not find!
Err_4003=The code flag is not correct!
Err_4006=The BBT data Abnormal!
Err_4007=Initilize data fail!
Err_4008=The function is not exist!
Err_4009=Load data fail!
Err_4010=Calculate data table fail!
Err_4011=Test code is out of range!
Err_4012=Verify flag fail!
Err_4013=Verify table fail!
Err_4014=Verify read-table fail!
Err_4015=The BC is too much!
Err_4016=Dwonload code fail!
Err_4017=GETBBT completed!。
Err_4018=MP Version is not correct.
Err_4019=MP Version is not correct.

Err_6000=Block 0 is bad.
Err_6001=The BadBlock Count is too much.
Err_6002=Bad page or sector.
Err_6003=The Flash is not support.
Err_6004=The ICType of flash is not correct.
[DlgPageBase]
LB_TitleName="MP Setting"
GP_FlashSetting="Flash Settings"
GP_UdiskSetting="Udisk Settings"
GP_VendorSetting="Vendor Settings"
GP_ScanSetting="Scan Settings"
GP_Formatburn="Format/Burn"
GP_PartitionSetting="Partition Settings"
GP_OptimizeSetting="Optimize Settings"
GP_LedSetting="LED Settings"
GP_SerialSetting="Serial Number Settings"
GP_Fixcapacity="Capacity/Bin Setting"
GP_OtherSetting="Other Setting"
GP_OtherICtypeSupport="IC Type"
LB_Flashtype="FlashType:"
LB_Flashcount="Count:"
LB_Channelcount="Channel:"
CK_SetflashID="Change Flash Type"
CK_Use8bit="Use 8Bit"
RADIO_Disknormal="Normal"
RADIO_Disksecurity="Security"
RADIO_Diskboottable="BootTable"
RADIO_Diskautorun="Autorun"
RADIO_Diskcustomized="Customized"
LB_Password="PassWord:"
LB_Vendor="Vendor:"
LB_Product="Product:"
RADIO_Scanhigh="Advance"
CK_Highuseoldcfg="Keep Setting"
STATIC_Highscanictype="ScanedICType"
RADIO_Scanlow="Low Scan"
LB_Eccbit="ECC:"
IDC_Checkauto="Auto Scan"
LB_Type1="Type:"
LB_Type2="Type:"
LB_Label1="Volume:"
LB_Label2="Volume:"
CHK_Part1wp="Partition0 WP"
CHK_Part2wp="Partition1 WP"
CHK_Copypart1="To Partition0"
CHK_Copypart2="To Partition1"
LB_Idle="Idle:"
LB_Busyness="Busyness:"
LB_Success="Success"
LB_Fail="Fail"
CHECK_Needformat="Format"
CHECK_Needburnin="BurnIn"
LB_Maketype="Type:"
CK_Numbersn="Number"
CK_Numberall="ASCII"
PREFIX_Serial="Fix/Prefix:"
LB_Increase="From"
LB_Digitlength="Digit Len:"
LB_Fixcapacity="Fix Capacity(MB):"
LB_Partition0cap="Partition0 Capacity(MB):"
LB_Partition1cap="Partition1 Capacity(MB):"
CK_Showredotherid="Check Flash(Red othe ID)"
IDC_Autostart="Auto Start"
IDC_Autorefresh="Auto Refresh"
CK_Testwritespeed="Test write speed"
CK_Stabilitypriority="Stability Priority"
LB_Optimize1="Optimize1:"
LB_Optimize2="Optimize2:"
LB_Replacecount="ReplaceBlock"
CK_Speedfirst="Speed Optimization"
CK_Showother="Show Other Setting"
BTN_Flash="Flash Settings"
BTN_Udisk="Udisk Settings"
BTN_Dev="Advance Settings"
BTN_OK="&OK"
BTN_Cancel="&Cancel"
IDC_Part1size="%.1f %%"
LB_Factoryflash="FactoryFlash"
LB_Scanedflash="Scaned Flash"
LB_CapacityFirstDefault="Default"
LB_Largecapacity="Large Capacity"
LB_HalfCapacity="Half Capacity"
LB_Autosearch="Auto Search"
LB_FatTypeDefault="Default"
LB_SerialModeAuto="Auto"
LB_SerialModeIncrease="Increase"
LB_SerialModeFixed="Fixed"
LB_SerialModeRemain="Remain"
LB_Part1TypeRemovable="Removable"
LB_Part1TypeLocal="Local"
LB_Part2TypeRemovable="Removable"
LB_Part2TypeLocal="Local"
LB_OptimizeModeCapacity="Capacity Priority"
LB_OptimizeModeStable="Stable Priority"
LB_OptimizeModeSpeed="Speed Priority"
LB_Optimize2MaxCapacity="0(Max Capacity)"
LB_Optimize2MaxSpeed="3(Max Speed)"
LB_Optimize2MaxSpeedErase="Erase"
LB_EccBit0="0"
LB_NoISOFile="Please specify the automatic playback dish ISO files!"
LB_ISOSizeError="CD capacity wrong!"
LB_SerialNumberErrorFirst="Illegal serial number characters，Please input 0~9 or A~F。"
LB_SerialNumberErrorSecond="Illegal serial number characters,Please input 0~9。"
LB_SerialNumberErrorThird="Illegal serial number characters，Please input0~9、A~Z、_、-。"
LB_PreCharError="Please input <= 26 a serial number prefix"
LB_FirstBigThanLast="Began to serial number is not greater than end serial number"
LB_VIDEmpty="VID can't for empty!"
LB_PIDEmpty="PID can't for empty!"
LB_InvalidVID="Invalid VID!"
LB_InvalidPID="Invalid PID!"
LB_InvalidFolder="Choose file is not effective directory!"
CK_KeepDevInfo=Keep DeviceInfo

[CDlgPageDev]
LB_TitleName="Advance Setting(*Do not change this settings)"
GP_Privatezone="Private Partion:"
LB_Privatecapacity="Capacity:"
LB_Authorize="AuthorizeKey:"
GP_Hidezone="Hidden Parition"
LB_Hidecapacity="Capacity:"
LB_Hidelabel="Volume:"
CHK_Copypart4="To HideZone"
GP_Lunzone="Lun and Partition Setting"
LB_Zonecount="Lun Count:"
LB_Lun0zone="Lun0 To Partition:"
LB_Lun1zone="Lun1 To Partition:"
LB_Lun2zone="Lun2 To Partition:"
GP_Zoneproperty="Zone Property Setting"
LB_Zone0type="Partition0 Type:"
LB_Zone1type="Partition1 Type:"
LB_Zone2type="Partition2 Type:"
LB_Zone3type="Partition3 Type:"
LB_Zone0capacity="Partition0 Capacity:"
LB_Zone1capacity="Partition1 Capacity:"
LB_Zone2capacity="Partition2 Capacity:"
LB_Zone3capacity="Partition3 Capacity:"
IDC_Wp0="Write Protect"
IDC_Wp1="Write Protect"
IDC_Wp2="Write Protect"
IDC_Wp3="Write Protect"
IDC_Rp0="Read Protect"
IDC_Rp1="Read Protect"
IDC_Rp2="Read Protect"
IDC_Rp3="Read Protect"
GP_Codefile="Code File Setting"
LB_Scanfile="Scan File:"
LB_Codefile="Code File:"
CK_Writew2promid="E2Prom MP"
CK_Driverletter="Use DriverLetter"
IDC_Btnok="&OK"
BTN_Cancel="&Cancel"
LB_LunNum1Lun="1Lun"
LB_LunNum2Lun="2Lun"
LB_LunNum3Lun="3Lun"
LB_DiskForLun0Partition0="Partition 0"
LB_DiskForLun0Partition1="Partition 1"
LB_DiskForLun0Partition2="Partition 2"
LB_DiskForLun0Partition3="Partition 3"
LB_DiskForLun1Partition0="Partition 0"
LB_DiskForLun1Partition1="Partition 1"
LB_DiskForLun1Partition2="Partition 2"
LB_DiskForLun1Partition3="Partition 3"
LB_DiskForLun2Partition0="Partition 0"
LB_DiskForLun2Partition1="Partition 1"
LB_DiskForLun2Partition2="Partition 2"
LB_DiskForLun2Partition3="Partition 3"
LB_DiskType0Removable="Removable"
LB_DiskType0Local="Local"
LB_DiskType0CDROM="CDROM"
LB_DiskType1Removable="Removable"
LB_DiskType1Local="Local"
LB_DiskType1CDROM="CDROM"
LB_DiskType2Removable="Removable"
LB_DiskType2Local="Local"
LB_DiskType2CDROM="CDROM"
LB_DiskType3Removable="Removable"
LB_DiskType3Local="Local"
LB_DiskType3CDROM="CDROM"
LB_InvalidFoler="Choose file is not effective directory!"

[CCapacityDlg]
LB_TitleName="Capacity"
IDC_CheckBtn1="Fix Capacity"
IDC_BtnDefault="&Default"
IDC_BtnOk="&Ok"
IDC_BtnCancel="&Cancel"

[CWBinDlg]
LB_WBinDlgTitleName="Write Speed"
IDC_BtnOk="&Ok"
IDC_BtnCancel="&Cancel"