{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "8 unused 3.30 0 8 0 " "Info: Number of I/O pins in group: 8 (unused VREF, 3.30 VCCIO, 0 input, 8 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0 "" 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 3 41 " "Info: I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 3 total pin(s) used --  41 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 48 " "Info: I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 45 " "Info: I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  45 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 48 " "Info: I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.430 ns register register " "Info: Estimated most critical path is register to register delay of 2.430 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns jishu1\[2\] 1 REG LAB_X11_Y4 5 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X11_Y4; Fanout = 5; REG Node = 'jishu1\[2\]'" {  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { jishu1[2] } "NODE_NAME" } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.534 ns) + CELL(0.434 ns) 0.968 ns Add0~98 2 COMB LAB_X12_Y4 2 " "Info: 2: + IC(0.534 ns) + CELL(0.434 ns) = 0.968 ns; Loc. = LAB_X12_Y4; Fanout = 2; COMB Node = 'Add0~98'" {  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "0.968 ns" { jishu1[2] Add0~98 } "NODE_NAME" } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 19 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.209 ns) 1.177 ns Add0~92 3 COMB LAB_X12_Y4 2 " "Info: 3: + IC(0.000 ns) + CELL(0.209 ns) = 1.177 ns; Loc. = LAB_X12_Y4; Fanout = 2; COMB Node = 'Add0~92'" {  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "0.209 ns" { Add0~98 Add0~92 } "NODE_NAME" } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 19 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.523 ns) 1.700 ns Add0~89 4 COMB LAB_X12_Y4 1 " "Info: 4: + IC(0.000 ns) + CELL(0.523 ns) = 1.700 ns; Loc. = LAB_X12_Y4; Fanout = 1; COMB Node = 'Add0~89'" {  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "0.523 ns" { Add0~92 Add0~89 } "NODE_NAME" } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 19 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.641 ns) + CELL(0.089 ns) 2.430 ns jishu1\[4\] 5 REG LAB_X11_Y4 7 " "Info: 5: + IC(0.641 ns) + CELL(0.089 ns) = 2.430 ns; Loc. = LAB_X11_Y4; Fanout = 7; REG Node = 'jishu1\[4\]'" {  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "0.730 ns" { Add0~89 jishu1[4] } "NODE_NAME" } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.255 ns ( 51.65 % ) " "Info: Total cell delay = 1.255 ns ( 51.65 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "1.175 ns ( 48.35 % ) " "Info: Total interconnect delay = 1.175 ns ( 48.35 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "2.430 ns" { jishu1[2] Add0~98 Add0~92 Add0~89 jishu1[4] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y0 X11_Y10 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y0 to location X11_Y10" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "6 " "Warning: Following 6 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[1\] GND " "Info: Pin dout\[1\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[1] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[1] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[2\] GND " "Info: Pin dout\[2\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[2] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[2] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[3\] GND " "Info: Pin dout\[3\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[3] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[3] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[4\] GND " "Info: Pin dout\[4\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[4] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[4] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[5\] GND " "Info: Pin dout\[5\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[5] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[5] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "dout\[6\] GND " "Info: Pin dout\[6\] has GND driving its datain port" {  } { { "d:/quartusii/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/quartusii/quartus/bin/pin_planner.ppl" { dout[6] } } } { "cd.vhd" "" { Text "E:/QuartueII/cd/cd.vhd" 7 -1 0 } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[6] } "NODE_NAME" } } { "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { dout[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "E:/QuartueII/cd/cd.fit.smsg " "Info: Generated suppressed messages file E:/QuartueII/cd/cd.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "176 " "Info: Allocated 176 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Mon Nov 03 22:21:49 2008 " "Info: Processing ended: Mon Nov 03 22:21:49 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Info: Elapsed time: 00:00:06" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}