04h	processor information
 05h	memory controller information
 06h	memory module information
 07h	cache information
 08h	port connector information
 09h	system slots
 0Ah	on-board devices
 0Dh	BIOS language
 0Eh	group associations
 0Fh	system event log
 10h	physical memory array
 11h	memory device information
 12h	memory error information
 13h	memory array mapped addresses
 14h	memory device mapped addresses
 15h	built-in pointing device information
 16h	portable battery
 17h	(v2.2+) system reset
 18h	(v2.2+) hardware security
 19h	(v2.2+) system power controls
 1Ah	(v2.2+) voltage probe
 1Bh	(v2.2+) cooling device
 1Ch	(v2.2+) temperature probe
 1Dh	(v2.2+) electrical current probe
 1Eh	(v2.2+) out-of-band remote access
 1Fh	(v2.3+) Boot Integrity Services (BIS) entry point
 20h	(v2.3+) system boot information
 21h	(v2.3+) 64-bit memory error information
 22h	(v2.3+) management device attributes
 23h	(v2.3+) management device component
 24h	(v2.3+) management device threshold information
 7Eh	inactive structure
 7Fh	end of structure table indicator
SeeAlso: #F0059

Bitfields for SMBIOS BIOS characteristics:
Bit(s)	Description	(Table F0061)
 63-48	reserved for system vendor
 47-32	reserved for BIOS vendor
 31	NEC PC-98
 30	supports INT 10 CGA/Mono video services
 29	supports INT 17 printer services
 28	supports INT 14 serial services
 27	supports INT 09 and 8042 keyboard services
 26	supports INT 05 print-screen
 25	supports INT 13 3.5-inch/2.88M floppy services
 24	supports INT 13 3.5-inch/720K floppy services
 23	supports INT 13 5.25-inch/1.2M floppy services
 22	supports INT 13 5.25-inch/360K floppy services
 21	supports INT 13 for Japanese Toshiba 1.2M floppy (3.5-inch, 360rpm)
 20	supports INT 13 for Japanese NEC 9800 1.2M floppy (3.5-inch, 1024-byte
	  sectors, 360rpm)
 19	supports Enhanced Disk Drive specification
 18	supports booting from PC Card (PCMCIA)
 17	BIOS ROM is socketed
 16	supports selectable boot
 15	supports booting from CD-ROM
 14	ESCD support is available
 13	supports VL-VESA
 12	allows BIOS shadowing
 11	upgradeable (Flash) BIOS
 10	supports APM
 9	supports Plug-and-Play
 8	supports PC Card (PCMCIA)
 7	supports PCI
 6	supports EISA
 5	supports MCA
 4	supports ISA
 3	BIOS characteristics not supported
 2	characteristics unknown
 1-0	reserved
SeeAlso: #F0059,#F0062,#F0063

Bitfields for SMBIOS v2.1+ BIOS characteristics extension byte 1:
Bit(s)	Description	(Table F0062)
 7	Smart Battery supported
 6	supports booting from IEEE 1394 device
 5	supports booting from ATAPI ZIP drive
 4	supports booting from LS-120
 3	supports booting from I2O device
 2	supports AGP
 1	supports legacy USB
 0	supports ACPI
SeeAlso: #F0059,#F0061,#F0063

Bitfields for SMBIOS v2.3+ BIOS characteristics extension byte 2:
Bit(s)	Description	(Table F0063)
 7-1	reserved for future versions
 0	supports BIOS Boot Specification (see #F0074)
SeeAlso: #F0059,#F0061,#F0062

(Table F0064)
Values for SMBIOS wake-up type:
 00h	reserved
 01h	other
 02h	unknown wake-up method
 03h	APM timer
 04h	modem ring
 05h	LAN remote
 06h	power switch
 07h	PCI PME#
 08h	AC power restored
SeeAlso: #F0059

(Table F0065)
Values for SMBIOS Chassis Type:
 01h	other
 02h	chassis type not known
 03h	desktop
 04h	low-profile desktop
 05h	pizza box
 06h	mini tower
 07h	full tower
 08h	portable
 09h	laptop
 0Ah	notebook
 0Bh	handheld
 0Ch	docking station
 0Dh	all-in-one
 0Eh	sub-notebook
 0Fh	space-saving
 10h	lunch box
 11h	main server chassis
 12h	expansion chassis
 13h	subchassis
 14h	bus-expansion chassis
 15h	peripheral chassis
 16h	RAID chassis
 17h	rack-mount
 18h	sealed-case PC
SeeAlso: #F0059,#F0066,#F0067

(Table F0066)
Values for SMBIOS system enclosure/chassis state:
 01h	other
 02h	state not known
 03h	safe
 04h	warning
 05h	critical
 06h	non-recoverable
SeeAlso: #F0059,#F0065,#F0067

(Table F0067)
Values for SMBIOS system enclosure/chassis security status:
 01h	other
 02h	not known
 03h	none
 04h	external interface locked out
 05h	external interface enabled
SeeAlso: #F0059,#F0065,#F0066

(Table F0068)
Values for SMBIOS processor type:
 01h	other
 02h	unknown processor type
 03h	central processor
 04h	math processor
 05h	digital signal processor (DSP)
 06h	video processor
SeeAlso: #F0059,#F0069,#F0070,#F0071

(Table F0069)
Values for SMBIOS processor family:
 01h	other
 02h	unknown processor family
 03h	8086
 04h	80286
 05h	80386
 06h	80486
 07h	8087
 08h	80287
 09h	80387
 0Ah	80487
 0Bh	Pentium
 0Ch	Pentium Pro
 0Dh	Pentium II
 0Eh	Pentium-MMX
 0Fh	Celeron
 10h	Pentium II-Xeon
 11h	reserved for future Pentium (probably Pentium III)
 12h	Cyrix M1 family
 13h-18h reserved for future M1 versions
 19h	AMD K5 family
 1Ah-1Fh reserved for future K5 versions
 20h	PowerPC family
 21h	PowerPC 601
 22h	PowerPC 603
 23h	PowerPC 603+
 24h	PowerPC 604
 30h	DEC Alpha family (Pentium Pro for some v2.0 implementations)
 40h	MIPS family
 50h	Sun SPARC family
 60h	Motorola 68040 family
 61h	68xxx
 62h	68000
 63h	68010
 64h	68020
 65h	68030
 70h	Hobbit family
 80h	Weitek
 90h	Hewlett-Packard PA-RISC family
 A0h	NEC V30 family
 B0h	
SeeAlso: #F0059,#F0068

Bitfields for SMBIOS processor identification data:
Bit(s)	Description	(Table F0070)
---x86 supporting CPUID---
 63-32	EDX returned by CPUID with EAX=1
 31-0	EAX returned by CPUID with EAX=1
---x86 not supporting CPUID---
 63-16	reserved
 15-0	contents of DX at CPU reset
SeeAlso: #F0059,#F0068

Bitfields for SMBIOS processor voltage:
Bit(s)	Description	(Table F0071)
 7	=0 legacy mode
	=1 new mode
---bit7=0---
 6-3	reserved (0)
 2	supports 2.9V
 1	supports 3.3V
 0	supports 5.0V
---bit7=1---
 6-0	current CPU voltage * 10 (12h = 1.8V)
SeeAlso: #F0059,#F0068,#F0072

Bitfields for SMBIOS processor status:
Bit(s)	Description	(Table F0072)
 7	reserved (0)
 6	CPU socket is populated
 5-3	reserved (0)
 2-0	CPU status
	000 unknown
	001 CPU enabled
	010 CPU disabled by user (via BIOS setup)
	011 CPU disabled by BIOS (POST error)
	100 CPU idle
	101 reserved
	110 reserved
	111 other
SeeAlso: #F0059,#F0068,#F0071

(Table F0073)
Values for SMBIOS processor upgrade:
 01h	other
 02h	unknown processor upgrade
 03h	daughter board
 04h	ZIF socket
 05h	replaceable piggyback
 06h	none
 07h	LIF socket
 08h	Slot 1
 09h	Slot 2
SeeAlso: #F0059,#F0068

(Table F0074)
Call BIOS Boot Specification function 60h with:
	STACK:	WORD	0060h (function "Get Version and Installation Check")
		DWORD	-> WORD buffer for BIOS Boot Spec version number (BCD)
Return: AX = status (see #F0081)
	   0081h if BIOS Boot not available
Note:	the large-model C declaration is
	  int (*entry)(int, int *) ;
SeeAlso: #F0075,#F0076,#F0077,#F0078

(Table F0075)
Call BIOS Boot Specification function 61h "Get IPL Device Count" with:
	STACK:	WORD	0061h (function "Get IPL Device Count")
		DWORD	-> WORD buffer for number of IPL devices in system
		DWORD	-> WORD buffer for max. number of IPL devices supported
		DWORD	-> WORD buffer for size of an IPL table entry
Return: AX = status (see #F0081)
Note:	the large-model C declaration is
	  int (*entry)(int, unsigned int *, unsigned int *, unsigned int *) ;
SeeAlso: #F0074,#F0076,#F0077,#F0078

(Table F0076)
Call BIOS Boot Specification function 62h with:
	STACK:	WORD	0062h (function "Get Boot Priority and IPL Table")
		DWORD	-> buffer for copy of boot priority stored in NVRAM
		DWORD	-> buffer for IPL table
Return: AX = status (see #F0081)
Notes:	the large-model C declaration is
	  int (*entry)(int, unsigned char *, unsigned char *) ;
	the size of the boot priority buffer must be at least MaxIPL bytes
	  (see #F0075), of which the first CurrentIPL bytes are valid, with
	  the lowest-valued byte indicating the device which should attempt
	  booting first, the next lowest second, etc.
	the size of the IPL table buffer must be at least MaxIPL + IPLsize
	  bytes (see #F0075)
SeeAlso: #F0074,#F0075,#F0077,#F0078

(Table F0077)
Call BIOS Boot Specification function 63h "Set Boot Priority" with:
	STACK:	WORD	0063h (function "Set Boot Priority")
		DWORD	-> buffer containing new boot priority list (see #F0076)
Return: AX = status (see #F0081)
Note:	the large-model C declaration is
	  int (*entry)(int, unsigned char *) ;
SeeAlso: #F0074,#F0075,#F0076,#F0078

(Table F0078)
Call BIOS Boot Specification function 64h with:
	STACK:	WORD	0064h (function "Get IPL Device from Last Boot")
		DWORD	-> WORD buffer for index in IPL table of boot device
Return: AX = status (see #F0081)
Note:	the large-model C declaration is
	  int (*entry)(int, unsigned int *) ;
SeeAlso: #F0074,#F0075,#F0076,#F0077,#F0079

(Table F0079)
Call BIOS Boot Specification function 65h "Get Boot First" with:
	STACK:	WORD	0065h (function "Get Boot First")
		DWORD	-> WORD buffer for index in IPL table of current
			  first boot device
Return: AX = status (see #F0081)
Notes:	the large-model C declaration is
	  int (*entry)(int, unsigned int *) ;
	the boot-first device will attempt booting before the boot-priority
	  list is considered
SeeAlso: #F0074,#F0075,#F0076,#F0077,#F0080

(Table F0080)
Call BIOS Boot Specification function 66h "Set Boot First" with:
	STACK:	WORD	0066h (function "Set Boot First")
		DWORD	-> WORD containing index in IPL table of new device
			  from which to attempt booting first before
			  considering the boot priority list
Return: AX = status (see #F0081)
Note:	the large-model C declaration is
	  int (*entry)(int, 
SeeAlso: #F0074,#F0075,#F0076,#F0077,#F0079

(Table F0081)
Values for Plug-and-Play function status code:
 0000h	successful
 0001h	boot device resource configuration not saved to nonvolatile memory
 0002h-007Eh reserved for future warnings
 0055h	unable to read/write Extended System Config Data from nonvolatile mem
 0056h	no valid Extended System Configuration Data in nonvolatile storage
 0059h	user's buffer was too small for Extended System Configuration Data
 007Fh	device could not be configured statically, but dynamic config succeeded