//*********************************************************
// IEEE STD 1364-1995 Verilog file: fun_text.v 
// Author-EMAIL: Uwe.Meyer-Baese@ieee.org
//*********************************************************
//  A 32 bit function generator using accumulator and ROM
//`include "220model.v"

module fun_text (M, sin, acc, clk); //----> Interface

  parameter WIDTH = 32;   // Bit width
  input  [WIDTH-1:0]  M;
  output [7:0]  sin, acc;
  input          clk;

  wire [WIDTH-1:0] s, acc32;
  wire [7:0]    msbs;               // Auxiliary vectors
  wire  ADD, ena, aset, sclr, sset; // Auxiliary signals
  wire aload, sload, aclr, ovf1, cin1, clkena; 

  // Default for add:
  assign clkena=0; assign cin1=0; assign ADD=1; 
  //default for FF:
  assign ena=1; assign aclr=0; assign aset=0; assign sclr=0;
  assign sset=0; assign aload=0; assign sload=0; 

  lpm_add_sub #(WIDTH) add_1 // Add M to acc32
  ( .result(s), .dataa(acc32), .datab(M),  // Used ports
    .cout(cr1), .add_sub(ADD), .overflow(ovl1),  // Unused
    .clock(clk),.cin(cin1), .clken(clkena), .aclr(aclr)); 
//  defparam add_1.lpm_width = WIDTH;
//  defparam add_1.lpm_representation = "UNSIGNED";


  lpm_ff #(WIDTH) reg_1          // Save accu
  ( .data(s), .q(acc32), .clock(clk),         // Used ports
    .enable(ena), .aclr(aclr), .aset(aset), // Unused ports
    .sset(sset), .aload(aload), .sload(sload),.sclr(sclr));
//  defparam reg_1.lpm_width = WIDTH;
    
  assign msbs = acc32[WIDTH-1:WIDTH-8];
  assign acc  = msbs;

  lpm_rom #(8,8,256,"UNREGISTERED","UNREGISTERED","sine.hex") rom1
  ( .q(sin), .inclock(clk), .outclock(clk), 
                             .address(msbs),  // Used ports
                      .memenab(ena) ) ;      // Unused port
//  defparam rom1.lpm_width = 8; 
//  defparam rom1.lpm_widthad = 8;
//  defparam rom1.lpm_file = "sine.hex";

endmodule