/********************************************************************/
/*  深圳市奇想達科技有限公司QXD-DM642開發板四路視頻					*/
/*  實時分屏顯示源程序,				                                */
/*  http://www.szqxd.com					     				    */
/********************************************************************/
/*以下的程序是用DMA方式采集圖的的設置、中斷、以及數據傳輸?shù)暮瘮?shù)*/
/**********************************************************/
/* Capture parameter definitions based on 525/60 format */
/**********************************************************/
/*NTSC*/
//#define VCA_HBLNK_SIZE 138 /* (858-720),horizontal blanking */
//#define VCA_IMG_VSIZE1 244 /* (263-20+1), fld1 vertical image size */
//#define VCA_IMG_VSIZE2 243 /* (525-283+1), fld2 vertical image size */

/*PAL*/
#define VCA_HBLNK_SIZE 144 /* (864-720),horizontal blanking */
/*確定第一場圖像的重直像素為288*/
#define VCA_IMG_VSIZE1 288 /* (311-24+1), fld1 vertical image size */
/*確定第一場圖像的重直像素為288*/
#define VCA_IMG_VSIZE2 288 /* (625-338+1), fld2 vertical image size */

/*確定第一場圖像的水平像素為720*/
#define VCA_IMG_HSIZE1 720 /* field1 horizontal image size */
/*確定第二場圖像的水平像素為720*/
#define VCA_IMG_HSIZE2 720 /* field2 horizontal image size */

/* 確定一場像素的大小為720×288 */
#define VCA_IMAGE_SIZE1 (VCA_IMG_HSIZE1 * VCA_IMG_VSIZE1)
/* 確定二場像素的大小為720×288 */
#define VCA_IMAGE_SIZE2 (VCA_IMG_HSIZE2 * VCA_IMG_VSIZE2)
/* Define threshold values in double.words. Both fields should have same threshold value*/
/* 確定FIFO的事件的門檻，為一行的長度，因為DM642為64位DMA，所以長度/8 */
#define VCA_VDTHRLD1 (VCA_IMG_HSIZE1/8) /* line length in */
#define VCA_VDTHRLD2 VCA_VDTHRLD1 /* double.words */


/*PAL2*/
#define VCB_HBLNK_SIZE 144 /* (864-720),horizontal blanking */
/*確定第一場圖像的重直像素為288*/
#define VCB_IMG_VSIZE1 288 /* (311-24+1), fld1 vertical image size */
/*確定第一場圖像的重直像素為288*/
#define VCB_IMG_VSIZE2 288 /* (625-338+1), fld2 vertical image size */

/*確定第一場圖像的水平像素為720*/
#define VCB_IMG_HSIZE1 720 /* field1 horizontal image size */
/*確定第二場圖像的水平像素為720*/
#define VCB_IMG_HSIZE2 720 /* field2 horizontal image size */

/* 確定一場像素的大小為720×288 */
#define VCB_IMAGE_SIZE1 (VCB_IMG_HSIZE1 * VCB_IMG_VSIZE1)
/* 確定二場像素的大小為720×288 */
#define VCB_IMAGE_SIZE2 (VCB_IMG_HSIZE2 * VCB_IMG_VSIZE2)
/* Define threshold values in double.words. Both fields should have same threshold value*/
/* 確定FIFO的事件的門檻，為一行的長度，因為DM642為64位DMA，所以長度/8 */
#define VCB_VDTHRLD1 (VCB_IMG_HSIZE1/8) /* line length in */
#define VCB_VDTHRLD2 VCB_VDTHRLD1 /* double.words */


/* ....................................................... */
/* Define channel A capture window co-ordinates for Field1 */
/* ....................................................... */
/*設置圖像的采集框channala*/
/* HRST = 0, start of horizontal blanking，HCOUNT在EAV后復位
   即一行是從EAV之后開始 ，那行消隱在前，圖像在后*/
#define VCA_XSTART1 (VCA_HBLNK_SIZE-2)/*EAV*/
#define VCA_XSTOP1 (VCA_XSTART1 + VCA_IMG_HSIZE1-1)
/* VRST = 1, end of vertical blanking */
#define VCA_YSTART1 1
#define VCA_YSTOP1 (VCA_YSTART1 + VCA_IMG_VSIZE1-1)


/*設置圖像的采集框channalb for Field1*/
/* HRST = 0, start of horizontal blanking，HCOUNT在EAV后復位
   即一行是從EAV之后開始 ，那行消隱在前，圖像在后*/
#define VCB_XSTART1 (VCB_HBLNK_SIZE-2)/*EAV*/
#define VCB_XSTOP1 (VCB_XSTART1 + VCB_IMG_HSIZE1-1)
/* VRST = 1, end of vertical blanking */
#define VCB_YSTART1 1
#define VCB_YSTOP1 (VCB_YSTART1 + VCB_IMG_VSIZE1-1)



/* ....................................................... */
/* Define channel A capture window co-ordinates for Field2 */
/* ....................................................... */
/* HRST = 0, start of horizontal blanking */
#define VCA_XSTART2 (VCA_HBLNK_SIZE-2/*EAV*/)
#define VCA_XSTOP2 (VCA_XSTART2 + VCA_IMG_HSIZE2-1)
/* VRST = 1, end of vertical blanking */
#define VCA_YSTART2 1
#define VCA_YSTOP2 (VCA_YSTART2 + VCA_IMG_VSIZE2-1)


/* HRST = 0, start of horizontal blanking (channalb)*/
#define VCB_XSTART2 (VCB_HBLNK_SIZE-2/*EAV*/)
#define VCB_XSTOP2 (VCB_XSTART2 + VCB_IMG_HSIZE2-1)
/* VRST = 1, end of vertical blanking */
#define VCB_YSTART2 1
#define VCB_YSTOP2 (VCB_YSTART2 + VCB_IMG_VSIZE2-1)



/* Define threshold values in double-words. Both fields should same threshold value */
/* 確定FIFO觸發的長度*/
#define VCA_THRLD_FIELD1 (VCA_IMG_HSIZE1/8) /* line length in */
#define VCA_THRLD_FIELD2 VCA_THRLD_FIELD1 /* double-words */

/* Define number of events to be generated for field1 and field2 
   定義奇場（244）與偶場的行數（243）*/
#define VCA_CAPEVT1 (VCA_IMAGE_SIZE1 / (VCA_VDTHRLD1 * 8))
#define VCA_CAPEVT2 (VCA_IMAGE_SIZE2 / (VCA_VDTHRLD2 * 8))
/* in this example 定義采1幀  */
#define CAPCHA_FRAME_COUNT 1 


//'channalb'
/* Define threshold values in double-words. Both fields should same threshold value */
/* 確定FIFO觸發的長度*/
#define VCB_THRLD_FIELD1 (VCB_IMG_HSIZE1/8) /* line length in */
#define VCB_THRLD_FIELD2 VCB_THRLD_FIELD1 /* double-words */

/* Define number of events to be generated for field1 and field2 
   定義奇場（244）與偶場的行數（243）*/
#define VCB_CAPEVT1 (VCB_IMAGE_SIZE1 / (VCB_VDTHRLD1 * 8))
#define VCB_CAPEVT2 (VCB_IMAGE_SIZE2 / (VCB_VDTHRLD2 * 8))
/* in this example 定義采1幀  */
#define CAPCHA_FRAME_COUNT 1 



/* ............................................ */
/* EDMA parameters for capture Y event that are */
/* specific to this example. */
/* ............................................ */

/* because VCA_THRLD_FIELDn is in double-words and element size is 32-bit */
#define VCA_Y_EDMA_ELECNT (VCA_THRLD_FIELD1 * 2) 

#define VCA_Y_EDMA_FRMCNT ((VCA_CAPEVT1 + VCA_CAPEVT2) * CAPCHA_FRAME_COUNT)

#define VCA_Y_EDMA_ELECNT2 (VCA_THRLD_FIELD1 * 2) 

#define VCA_Y_EDMA_FRMCNT2 ((VCA_CAPEVT1 + VCA_CAPEVT2) * CAPCHA_FRAME_COUNT)

/* ............................................'channalb' */
/* EDMA parameters for capture Y event that are */
/* specific to this example. */
/* ............................................ */
/* because VCB_THRLD_FIELDn is in double-words and element size is 32-bit */
#define VCB_Y_EDMA_ELECNT (VCB_THRLD_FIELD1 * 2) 

#define VCB_Y_EDMA_FRMCNT ((VCB_CAPEVT1 + VCB_CAPEVT2) * CAPCHA_FRAME_COUNT)

#define VCB_Y_EDMA_ELECNT2 (VCB_THRLD_FIELD1 * 2) 

#define VCB_Y_EDMA_FRMCNT2 ((VCB_CAPEVT1 + VCB_CAPEVT2) * CAPCHA_FRAME_COUNT)

/******************************************************************/
/* Description : 8.bit BT.656 non.continuous frame capture 		  */
/* 																  */
/* Some important field descriptions:                             */
/*                                                                */
/* CMODE = 000, 8.bit BT.656 mode                                 */
/* CON = 0                                                        */
/* FRAME = 1, capture frame                                       */
/* CF2 = 0                                                        */
/* CF1 = 0, (8-bit non.continuous frame capture)                  */
/* SCALE = 0, no scaling                                          */
/* RESMPL= 0, no resampling                                       */
/* 10BPK = X, not used in 8-bit capture                           */
/* EXC = 0, use EAV/SAV codes                                     */
/* VRST = 1, end of vertical blanking                             */
/* HRST = 0, start of horizontal blanking                         */
/* FLDD = 0, 1st line EAV or FID input                            */
/* FINV = 0, no field invert                                      */
/* RDFE = X, used in Raw mode only(Enable field identification)   */
/* SSE = X, used in Raw mode only(Startup synch enable)           */
/******************************************************************/
#include <vportcap.h>
/*................................................................ */
/* global variable declarations 								   */
/* ............................................................... */

	
	#pragma DATA_SECTION(capChaAYSpacec, ".capChaAYSpacec") 
	/* buffer to store captured Y-data */
	Uint8 capChaAYSpacec[720*588]; 
	#pragma DATA_SECTION(capChaACbSpacec, ".capChaACbSpacec")
	/* buffer to store captured Cb-data */
	Uint8 capChaACbSpacec[360*588]; 
	#pragma DATA_SECTION(capChaACrSpacec, ".capChaACrSpacec")
	/* buffer to store captured Cr-data */
	Uint8 capChaACrSpacec[360*588];
	
	
	#pragma DATA_SECTION(capChaAYSpaced, ".capChaAYSpaced") 
	/* buffer to store captured Y-data */
	Uint8 capChaAYSpaced[720*588]; 
	#pragma DATA_SECTION(capChaACbSpaced, ".capChaACbSpaced")
	/* buffer to store captured Cb-data */
	Uint8 capChaACbSpaced[360*588]; 
	#pragma DATA_SECTION(capChaACrSpaced, ".capChaACrSpaced")
	/* buffer to store captured Cr-data */
	Uint8 capChaACrSpaced[360*588];
	
	/* handle of vp that to be configured */
	VP_Handle vpCaptureHandle,vpCaptureHandle2; 
	/*設置Y、Cb、Cr的EDMA通路的句柄*/ 
	EDMA_Handle hEdmaVPCapChaAY;
	EDMA_Handle hEdmaVPCapChaACb;
	EDMA_Handle hEdmaVPCapChaACr;
	
	EDMA_Handle hEdmaVPCapChaAYb;
	EDMA_Handle hEdmaVPCapChaACbb;
	EDMA_Handle hEdmaVPCapChaACrb;
	
	
	EDMA_Handle hEdmaVPCapChaA2Y;
	EDMA_Handle hEdmaVPCapChaA2Cb;
	EDMA_Handle hEdmaVPCapChaA2Cr;
	
	EDMA_Handle hEdmaVPCapChaA2Yb;
	EDMA_Handle hEdmaVPCapChaA2Cbb;
	EDMA_Handle hEdmaVPCapChaA2Crb;
	
	
	
	/* EDMA tcc for Y channel */
	Int32 edmaCapChaAYTccNum = 0; 
	/* EDMA tcc for Cb channel */
	Int32 edmaCapChaACbTccNum = 0;
	/* EDMA tcc for Cb channel */ 
	Int32 edmaCapChaACrTccNum = 0;
	
	
	Int32 edmaCapChaAYTccNum2 = 0; 
	/* EDMA tcc for Cb channel */
	Int32 edmaCapChaACbTccNum2 = 0;
	/* EDMA tcc for Cb channel */ 
	Int32 edmaCapChaACrTccNum2 = 0;
	
	
	/* no of frames captured */ 
	volatile Uint32 capChaAFrameCount = 0; 
	
	/* Error flags */
	volatile Uint32 capChaAOverrun = 0;
	volatile Uint32 capChaASyncError = 0;
	volatile Uint32 capChaAShortFieldDetect = 0;
	volatile Uint32 capChaALongFieldDetect = 0;
	volatile Uint32 capNewFrame = 0;
	//volatile Uint32 capNewFrameb = 0;
//	volatile Uint32 displayFrameCount = 0; /* no of frames that are */
	



VP_Handle bt656_8bit_ncfc2( int portNumber)
{
	/* Open video port for capture ,打開一個視頻端口*/
	vpCaptureHandle2 = VP_open(portNumber, VP_OPEN_RESET);
	if(vpCaptureHandle2 == INV)
	{
		return (VP_Handle)0xffff;
	}
	/*將VP設置為雙通路*/
	VP_FSETH(vpCaptureHandle2,VPCTL,DCHNL,VP_VPCTL_DCHNL_OF(1));
	
	/* Enable video port functionality in VP Peripheral Control Reg(PCR)，使能視頻端口*/
	VP_FSETH(vpCaptureHandle2, PCR, PEREN, VP_PCR_PEREN_ENABLE);
	/* ..................... */
	/* Enable all interrupts */
	/* ..................... */
	/*便能VCA的中斷源*/
	/* Enable capture overrun interrupt(COVRA) for VP channel A */
	VP_FSETH(vpCaptureHandle2, VPIE, COVRA, VP_VPIE_COVRA_ENABLE);
	VP_FSETH(vpCaptureHandle2, VPIE, COVRB, VP_VPIE_COVRB_ENABLE);
	
	/* Enable capture complete interrupt(CCMPA) for VP channel A */
	VP_FSETH(vpCaptureHandle2, VPIE, CCMPA, VP_VPIE_CCMPA_ENABLE);
	VP_FSETH(vpCaptureHandle2, VPIE, CCMPB, VP_VPIE_CCMPB_ENABLE);
	/* Enable channel synchronization error interrupt(SERRA) for */
	/* VP channel A */
	VP_FSETH(vpCaptureHandle2, VPIE, SERRA, VP_VPIE_SERRA_ENABLE);
    VP_FSETH(vpCaptureHandle2, VPIE, SERRB, VP_VPIE_SERRB_ENABLE);	
	/* Enable short field detect interrupt(SFDA) for VP channel A */
	VP_FSETH(vpCaptureHandle2, VPIE, SFDA, VP_VPIE_SFDA_ENABLE);
	VP_FSETH(vpCaptureHandle2, VPIE, SFDB, VP_VPIE_SFDB_ENABLE);
	// Enable video port global interrupt enable 
	VP_FSETH(vpCaptureHandle2, VPIE, VIE, VP_VPIE_VIE_ENABLE);

	
	VP_FSETH(vpCaptureHandle2, VCACTL, SFDE, VP_VCACTL_SFDE_ENABLE);
	VP_FSETH(vpCaptureHandle2, VCBCTL, SFDE, VP_VCBCTL_SFDE_ENABLE);

	VP_RSETH(vpCaptureHandle2, VCASTOP1,VP_VCASTOP1_RMK(VCA_YSTOP1, VCA_XSTOP1));
	VP_RSETH(vpCaptureHandle2, VCBSTOP1,VP_VCASTOP1_RMK(VCB_YSTOP1, VCB_XSTOP1));
	
	
	VP_RSETH(vpCaptureHandle2, VCASTOP2,VP_VCASTOP2_RMK(VCA_YSTOP2, VCA_XSTOP2));
	VP_RSETH(vpCaptureHandle2, VCBSTOP2,VP_VCBSTOP2_RMK(VCB_YSTOP2, VCB_XSTOP2));

	
	VP_RSETH(vpCaptureHandle2, VCASTRT1, VP_VCASTRT1_RMK(VCA_YSTART1,VP_VCASTRT1_SSE_ENABLE, VCA_XSTART1));
	VP_RSETH(vpCaptureHandle2, VCBSTRT1, VP_VCBSTRT1_RMK(VCB_YSTART1,VP_VCBSTRT1_SSE_ENABLE, VCB_XSTART1));
	/* Set first pixel to be captured in Field2 (VCA_STRT2 reg) */
	//設置第二場的第一個像素的Y軸與X軸的坐標
	VP_RSETH(vpCaptureHandle2, VCASTRT2,VP_VCASTRT2_RMK(VCA_YSTART2, VCA_XSTART2));
	VP_RSETH(vpCaptureHandle2, VCBSTRT2,VP_VCBSTRT2_RMK(VCB_YSTART2, VCB_XSTART2));
	
	// Set threshold values ，設置EDMA啟動的門限
	VP_RSETH(vpCaptureHandle2, VCATHRLD,VP_VCATHRLD_RMK(VCA_THRLD_FIELD2, VCA_THRLD_FIELD1));
	VP_RSETH(vpCaptureHandle2, VCBTHRLD,VP_VCBTHRLD_RMK(VCB_THRLD_FIELD2, VCB_THRLD_FIELD1));

	// Set capture event.register values，設置一場的需要的EDMA的次數 
	VP_RSETH(vpCaptureHandle2, VCAEVTCT,VP_VCAEVTCT_RMK(VCA_CAPEVT2,VCA_CAPEVT1));
	VP_RSETH(vpCaptureHandle2, VCBEVTCT,VP_VCBEVTCT_RMK(VCB_CAPEVT2,VCB_CAPEVT1));

	// Vertical interrupts (VCA_INT) are not enabled in this example. 
	//Set CMODE to 8.bit BT.656，采用BT656格式的數據流 
	VP_FSETH(vpCaptureHandle2, VCACTL, CMODE, VP_VCACTL_CMODE_BT656B);
	VP_FSETH(vpCaptureHandle2, VCBCTL, CMODE, VP_VCBCTL_CMODE_BT656B);

	//Set non.continuous frame capture，設置為電視顯示格式的采集，即不連續的采集，
	  // CON/FRAME/CF2/CF1的值為0100 
	VP_FSETH(vpCaptureHandle2, VCACTL, CON, VP_VCACTL_CON_DISABLE);
	VP_FSETH(vpCaptureHandle2, VCACTL, FRAME, VP_VCACTL_FRAME_FRMCAP);
	VP_FSETH(vpCaptureHandle2, VCACTL, CF2, VP_VCACTL_CF2_NONE);
	VP_FSETH(vpCaptureHandle2, VCACTL, CF1, VP_VCACTL_CF1_NONE);
	
	VP_FSETH(vpCaptureHandle2, VCBCTL, CON, VP_VCBCTL_CON_DISABLE);
	VP_FSETH(vpCaptureHandle2, VCBCTL, FRAME, VP_VCBCTL_FRAME_FRMCAP);
	VP_FSETH(vpCaptureHandle2, VCBCTL, CF2, VP_VCBCTL_CF2_NONE);
	VP_FSETH(vpCaptureHandle2, VCBCTL, CF1, VP_VCBCTL_CF1_NONE);

	//Let FLDD and FINV to be their defaults 
	// Set VRST to end of vertical blanking,VCOUNT復位在場消隱之后 
	VP_FSETH(vpCaptureHandle2, VCACTL, VRST, VP_VCACTL_VRST_V0EAV);
	VP_FSETH(vpCaptureHandle2, VCBCTL, VRST, VP_VCBCTL_VRST_V0EAV);

	// Set HRST to start of horizontal blanking，行計數復位在EAV之后 
	VP_FSETH(vpCaptureHandle2, VCACTL, HRST, VP_VCACTL_HRST_OF(0));
	VP_FSETH(vpCaptureHandle2, VCBCTL, HRST, VP_VCBCTL_HRST_OF(0));


	//初始化EDMA通路
//	IRQ_enable(IRQ_EVT_VINT1);
	/* Enable video port interrupts */
//	IRQ_enable(vpCaptureHandle->eventId);
	
	//初始化EDMA通路
	IRQ_enable(IRQ_EVT_VINT2);
	/* Enable video port interrupts */
	IRQ_enable(vpCaptureHandle2->eventId);

	//Setup Y, Cb and Cr EDMA channels 
	setupVPCapChaAEDMA2(portNumber);
	// Clear VPHLT in VP_CTL to make video port function，清除VPHLT位
//	   使能其它位 
	VP_FSETH(vpCaptureHandle2, VPCTL, VPHLT, VP_VPCTL_VPHLT_CLEAR);

	// set VCEN bit to enable capture，使能VCA口 
	VP_FSETH(vpCaptureHandle2, VCACTL, VCEN, VP_VCACTL_VCEN_ENABLE);
	VP_FSETH(vpCaptureHandle2, VCBCTL, VCEN, VP_VCBCTL_VCEN_ENABLE);