/***********************************
Name:    EEPROMDG128.c
Function:Erase and Program the EEPROM  
Author:  QIU ZHAOPENG  
Data:    2008.10.01
************************************/


/* MODULE IEE1. */

#include "IEE1.h"

/* Definition of DATA and CODE segments for this bean. User can specify where
   these segments will be located on "Build options" tab of the selected CPU bean. */
#pragma DATA_SEG IEE1_DATA             /* Data section for this module. */
#pragma CODE_SEG IEE1_CODE             /* Code section for this module. */

bool IEE1_Wait ;                        /* Wait status of writting methods */
//dword tmpDword;
//word tmpWord;       //用于Word變量的返回
//byte tmpByte;       //用于Byte變量的返回

/*
** ===================================================================
**     Method      :  WriteWord (bean IntEEPROM)
**
**     Description :
**         This method is internal. It is used by Processor Expert
**         only.
** ===================================================================
*/
byte WriteWord(word AddrRow,word Data16)
{
  if (ESTAT_CBEIF == 0)                /* Is command buffer full ? */
    return ERR_BUSY;                   /* If yes then error */
  /* ESTAT: PVIOL=1,ACCERR=1 */
  ESTAT |= 48;                         /* Clear error flags */
  *(volatile word *) AddrRow = Data16; /* Array address and program data */
  /* ECMD: ??=0,CMDB6=0,CMDB5=1,??=0,??=0,CMDB2=0,??=0,CMDB0=0 */
  ECMD = 32;                           /* Word program command */
  ESTAT_CBEIF = 1;                     /* Clear flag command buffer empty */
  if ((ESTAT_PVIOL == 1)||(ESTAT_ACCERR == 1)) /* Is protection violation or acces error detected ? */
    return ERR_NOTAVAIL;               /* If yes then error */
  if (IEE1_Wait) {                     /* Is the flag set ? */
    while (ESTAT_CBEIF == 0);          /* If yes then wait to buffer empty */
    while (ESTAT_CCIF == 0);           /* Wait for command completition */
    if (*(volatile word *) AddrRow != Data16) /* Was attempt to write data to the given address errorneous? */
      return ERR_VALUE;                /* If yes then error */
  }
  return ERR_OK;
}
/*
** ===================================================================
**     Method      :  WriteSector (bean IntEEPROM)
**
**     Description :
**         This method is internal. It is used by Processor Expert
**         only.
** ===================================================================
*/
byte WriteSector(word AddrSec,dword Data32)
{
  byte err;                            /* Temporary variable */

  if (ESTAT_CBEIF == 0)                /* Is command buffer full ? */
    return ERR_BUSY;                   /* If yes then error */
  /* ESTAT: PVIOL=1,ACCERR=1 */
  ESTAT |= 48;                         /* Clear error flags */
  *(volatile word *) AddrSec = (word)(Data32 >> 16); /* Array address and program data - higher part */
  /* ECMD: ??=0,CMDB6=1,CMDB5=1,??=0,??=0,CMDB2=0,??=0,CMDB0=0 */
  ECMD = 96;                           /* Sector modify command */
  ESTAT_CBEIF = 1;                     /* Clear flag command buffer empty */
  if ((ESTAT_PVIOL == 1)||(ESTAT_ACCERR == 1)) /* Is protection violation or acces error detected ? */
    return ERR_NOTAVAIL;               /* If yes then error */
  while (ESTAT_CBEIF == 0);            /* Wait to buffer empty */
  err=WriteWord(AddrSec + 2,(word)Data32); /* Write lower part */
  if (err != ERR_OK)                   /* Was attemp to write data to the given address errorneous? */
    return err;                        /* If yes then error */
  if (IEE1_Wait) {                     /* Is the flag set ? */
    if (*(volatile word *) AddrSec != (word)(Data32 >> 16)) /* Was attempt to write data to the given address errorneous? */
      return ERR_VALUE;                /* If yes then error */
  }
  return ERR_OK;
}
/*
** ===================================================================
**     Method      :  IEE1_SetByte (bean IntEEPROM)
**
**     Description :
**         Method writes given byte to the given address in EEPROM.
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**         Data            - Data to write
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE1_SetByte(word Addr,byte Data)
{
  union {
    byte b[4];
    word w[2];
    long l;
  } backup;
  byte idx;

  if ((Addr < EEPROMStart)||(Addr > EEPROMEnd)) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  backup.l = *(volatile dword *)(Addr & 0xFFFC); /* Load sector to variable backup */
  backup.b[Addr&0x0003] = Data;        /* Store data to variable backup */
  Addr &= 0xFFFE;                      /* Aligned address */
  if (*(volatile word *)(Addr) == 0xFFFF) { /* Is given EEPROM row erased ? */
    idx = (byte) ((Addr & 0x0002) >> 1); /* Word index in sector */
    return (WriteWord(Addr,backup.w[idx])); /* Write new content */
  }
  else                                 /* Is given address non-erased ? */
    return (WriteSector(Addr & 0xFFFC, backup.l)); /* If yes then write new content */
}

/*
** ===================================================================
**     Method      :  IEE1_GetByte (bean IntEEPROM)
**
**     Description :
**         Method reads byte from the given EEPROM address
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**       * Data            - Pointer to returned 8-bit data
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE1_GetByte(word Addr,byte *Data)
{
  if ((Addr < EEPROMStart)||(Addr > EEPROMEnd)) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  *Data = *(volatile byte *) Addr;     /* Return data from given address */
  return ERR_OK;                       /* OK */
}

/*
** ===================================================================
**     Method      :  IEE1_SetWord (bean IntEEPROM)
**
**     Description :
**         Method writes given word to the given address in EEPROM.
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**         Data            - Data to write
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE1_SetWord(word Addr,word Data)
{
  if ((Addr < EEPROMStart)||(Addr > (EEPROMEnd - 1))) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  if (Addr & 0x0001)                   /* Aligned address ? */
    return ERR_NOTAVAIL;
  if (*(volatile word *)Addr == 0xFFFF) { /* Is given EEPROM row erased ? */
    return (WriteWord(Addr,Data));     /* Write new content */
  }
  else {                               /* Is given address non-erased ? */
    if (Addr & 2)                      /* Is given address from low part of the sector ? */
      return (WriteSector(Addr & 0xFFFC,(dword)Data | ((*(volatile dword *)(Addr & 0xFFFC) & 0xFFFF0000))));
    else                               /* Is given address from high part of the sector ? */
      return (WriteSector(Addr,((dword)Data << 16) | (*(volatile word *)(Addr + 2))));
  }
}

/*
** ===================================================================
**     Method      :  IEE1_GetWord (bean IntEEPROM)
**
**     Description :
**         Method reads word from the given EEPROM address
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**       * Data            - Pointer to returned 16-bit data
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE1_GetWord(word Addr,word *Data)
{
  if ((Addr < EEPROMStart)||(Addr > (EEPROMEnd - 1))) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  *Data = *(volatile word *) Addr;     /* Return data from given address */
  return ERR_OK;                       /* OK */
}

/*
** ===================================================================
**     Method      :  IEE1_SetWait (bean IntEEPROM)
**
**     Description :
**         Method changes wait status of methods SetByte, SetActByte
**         and SetPage.
**     Parameters  :
**         NAME            - DESCRIPTION
**         Wait            - TRUE - methods wait till the write
**                           operation to EEPROM is finished,
**                           FALSE - methods do not wait for the end
**                           of write operation
**     Returns     : Nothing
** ===================================================================
*/
/*
void IEE1_SetWait(bool Wait)

**      This method is implemented as macro. See IEE1.h file.      **
*/

/*
** ===================================================================
**     Method      :  IEE1_Busy (bean IntEEPROM)
**
**     Description :
**         Method return status of EEPROM device
**     Parameters  : None
**     Returns     :
**         ---             - TRUE/FALSE - EEPROM is busy/ready
** ===================================================================
*/
/*
bool IEE1_Busy(void)

**      This method is implemented as macro. See IEE1.h file.      **
*/

/*
** ===================================================================
**     Method      :  IEE1_Init (bean IntEEPROM)
**
**     Description :
**         This method is internal. It is used by Processor Expert
**         only.
** ===================================================================
*/
void IEE1_Init(void)
{
  ECLKDIV = 4a;         //16M/8=2M,2M/(1+10)=181.8k in the range 150k--200k 	
  IEE1_Wait = TRUE;      /* No wait in loop to command complete */
}

/* END IEE1. */

/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 03.33 for 
**     the Motorola HCS12 series of microcontrollers.
**
** ###################################################################
*/

/*****************************************************
 * 在Eeprom的Addr位置寫入word類型的數據Data
 *****************************************************/
void WriteEepromWord(word Addr, word Data)
{
	word tmpWord;
	
    while (IEE1_Busy());
	
 	IEE1_GetWord(Addr, &tmpWord);
	
	if (Data != tmpWord)
	{
	    while (IEE1_Busy());
 		IEE1_SetWord(Addr, Data);
	}
}

/*****************************************************
 * 在Eeprom的Addr位置讀取word類型的數據
 *****************************************************/
word ReadEepromWord(word Addr)
{
    word tmpWord;
    
	while (IEE1_Busy());
	
 	IEE1_GetWord(Addr, &tmpWord);
	
	return tmpWord;
}

/*****************************************************
 * 在Eeprom的Addr位置寫入byte類型的數據Data
 *****************************************************/
void WriteEepromByte(word Addr, byte Data)
{
	byte tmpByte;
	
	while (IEE1_Busy());

 	IEE1_GetByte(Addr, &tmpByte);

	if (Data != tmpByte)
	{
	    while (IEE1_Busy());

	    IEE1_SetByte(Addr, Data);
	}
}


/*****************************************************
 * 在Eeprom的Addr位置讀取byte類型的數據
 *****************************************************/
byte ReadEepromByte(word Addr)
{
    byte tmpByte;
    
	while (IEE1_Busy());
	
	IEE1_GetByte(Addr, &tmpByte);
	
	return tmpByte;
}

/*
** ===================================================================
**     Method      :  IEE2_SetLong (bean IntEEPROM)
**
**     Description :
**         Method writes given long word to the given address in
**         EEPROM.
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**         Data            - Data to write
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE2_SetLong(word Addr,dword Data)
{
  if ((Addr < EEPROMStart)||(Addr > (EEPROMEnd - 3))) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  if (Addr & 0x0003)                   /* Aligned address ? */
    return ERR_NOTAVAIL;
  return (WriteSector(Addr,Data));     /* Write new content of given sector */
}

/*
** ===================================================================
**     Method      :  IEE2_GetLong (bean IntEEPROM)
**
**     Description :
**         Method reads long word from the given EEPROM address
**     Parameters  :
**         NAME            - DESCRIPTION
**         Addr            - Address to EEPROM
**       * Data            - Pointer to returned 32-bit data
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
byte IEE2_GetLong(word Addr,dword *Data)
{
  if ((Addr < EEPROMStart)||(Addr > (EEPROMEnd - 3))) /* Is given address out of EEPROM area array ? */
    return ERR_RANGE;                  /* If yes then error */
  *Data = *(volatile dword *) Addr;    /* Return data from given address */
  return ERR_OK;                       /* OK */
}

/*****************************************************
 * 在Eeprom的Addr位置寫入lonh類型的數據Data
 *****************************************************/
void WriteEepromDword(word Addr, dword Data)
{
	dword tmpDword;
	
    while (IEE1_Busy());
 	IEE2_GetLong(Addr, &tmpDword);
	if (Data != tmpDword)
	{
	    while (IEE1_Busy());
 		IEE2_SetLong(Addr, Data);
	}
}