DRAFT#OFFSET 拔模偏移#Attributes 屬性Side surfaces normal to reference surfaces or sketching plane.側曲面垂直于參照曲面或草繪曲面。Surfaces 曲面Select surfaces to offset.選取偏移曲面。Section 截面Sketch base section of the offset.草繪偏移的基準截面Profile#Type 輪廓類型Side surfaces straight or tangent to reference and offset surfaces.側曲面直至或相切參照和偏移曲面。Offset#Value 偏移值Distance between the reference and offset surfaces.在參照和偏移曲面間的距離。Bevel#Angle 斜角Amount of draft to be added to all side surfaces.要加到所有側曲面的拔模數。Min#Draft 最小拔模Minimum angle of draft required relative to the pull direction.所需最小拔模角與拖拉方向有關。Pull#Dir 拖拉方向Pull direction.拖拉方向。DFTOFF#DIR 拔模方向Specify direction.指定方向。DFTOFF#TRANS 拔模平移Specify translation.指定平移。