#!/usr/bin/kermit +# usage: ./flash_param parameters# Parameters: IP Address       ETH Address        ERIC Number# Format:     xxx.xxx.xxx.xxx  xx:xx:xx:xx:xx:xx  xxxxset line /dev/ttyS0set speed 115200set serial 8N1set carrier-watch offset handshake none#set flow-control noneset flow-control xon/xoff#robustset file type binset file name litset rec pack 1000set send pack 1000set window 5set prompt Kermit>#robust# Milliseconds to pause between each OUTPUT characterset output pacing 1out \13in 10 =>#first erase the environment memory within NVRAMout mw f0000000 0 200\13in 10 =>out reset\13in 5 autobootout \13\13in 10 =>#set additional env parameterout setenv ethaddr \%2\13in 10 =>out setenv serial# ERIC 1.0 \%3\13in 10 =>out setenv eric_id \%3\13in 10 =>#out setenv prec_videocard_bus unknown\13#in 10 =>#out setenv prec_bios_type unknown\13#in 10 =>out setenv eric_passwd .eRIC.\13in 10 =>#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.1.100:192.168.1.254:255.255.255.0\13#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.0.1\13#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1\13out setenv bootargs console=/dev/ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.26:/eric_root_devel ip=\%1:192.168.1.26\13in 10 =>out setenv bootcmd bootm FFC00000\13in 10 =>out saveenv\13in 10 =>out reset\13in 5 autobootout \13\13in 10 =>quitexit 0