/****************************************************************************** * * Name:	xmac_ii.h * Project:	GEnesis, PCI Gigabit Ethernet Adapter * Version:	$Revision: 1.46 $ * Date:	$Date: 2003/01/28 09:47:45 $ * Purpose:	Defines and Macros for Gigabit Ethernet Controller * ******************************************************************************//****************************************************************************** * *	(C)Copyright 1998-2003 SysKonnect GmbH. * *	This program is free software; you can redistribute it and/or modify *	it under the terms of the GNU General Public License as published by *	the Free Software Foundation; either version 2 of the License, or *	(at your option) any later version. * *	The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * History: * *	$Log: xmac_ii.h,v $ *	Revision 1.46  2003/01/28 09:47:45  rschmidt *	Added defines for copper MDI/MDIX configuration *	Added defines for LED Control Register *	Editorial changes * *	Revision 1.45  2002/12/10 14:35:13  rschmidt *	Corrected defines for Extended PHY Specific Control *	Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific) * *	Revision 1.44  2002/12/09 14:58:41  rschmidt *	Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature) *	Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask * *	Revision 1.43  2002/12/05 10:14:45  rschmidt *	Added define for GMAC's Half Duplex Burst Mode *	Added define for Rx GMAC FIFO Flush Mask (default) * *	Revision 1.42  2002/11/12 16:48:19  rschmidt *	Added defines for Cable Diagnostic Register (GPHY) *	Editorial changes * *	Revision 1.41  2002/10/21 11:20:22  rschmidt *	Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR *	Editorial changes * *	Revision 1.40  2002/10/14 14:54:14  rschmidt *	Added defines for GPHY Specific Status and GPHY Interrupt Status *	Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK *	Editorial changes * *	Revision 1.39  2002/10/10 15:53:44  mkarl *	added some bit definitions for link speed status and LED's * *	Revision 1.38  2002/08/21 16:23:46  rschmidt *	Added defines for PHY Specific Ctrl Reg *	Editorial changes * *	Revision 1.37  2002/08/16 14:50:33  rschmidt *	Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only) *	Changed define PHY_M_DEF_MSK for GPHY IRQ Mask *	Editorial changes * *	Revision 1.36  2002/08/12 13:21:10  rschmidt *	Added defines for different Broadcom PHY Ids * *	Revision 1.35  2002/08/08 15:58:01  rschmidt *	Added defines for Manual LED Override register (YUKON) *	Editorial changes * *	Revision 1.34  2002/07/31 17:23:36  rwahl *	Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR). * *	Revision 1.33  2002/07/23 16:03:37  rschmidt *	Added defines for GPHY registers *	Editorial changes * *	Revision 1.32  2002/07/15 18:14:37  rwahl *	Added GMAC MIB counters definitions. *	Editorial changes. * *	Revision 1.31  2002/07/15 15:42:50  rschmidt *	Removed defines from PHY specific reg. which are *	common to all PHYs *	Added defines for GMAC MIB Counters *	Editorial changes * *	Revision 1.30  2002/06/05 08:22:12  rschmidt *	Changed defines for GMAC Rx Control Register and Rx Status *	Editorial changes * *	Revision 1.29  2002/04/25 11:43:56  rschmidt *	Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res. *	Added new registers and defines for YUKON (GMAC, GPHY) *	Added Receive Frame Status Encoding for YUKON *	Editorial changes * *	Revision 1.28  2000/11/09 12:32:49  rassmann *	Renamed variables. * *	Revision 1.27  2000/05/17 11:00:46  malthoff *	Add bit for enable/disable power management in BCOM chip. * *	Revision 1.26  1999/11/22 14:03:00  cgoos *	Changed license header to GPL. * *	Revision 1.25  1999/08/12 19:19:38  malthoff *	Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet. * *	Revision 1.24  1999/07/30 11:27:21  cgoos *	Fixed a missing end-of-comment. * *	Revision 1.23  1999/07/30 07:03:31  malthoff *	Cut some long comments. *	Correct the XMAC PHY ID definitions. * *	Revision 1.22  1999/05/19 07:33:18  cgoos *	Changes for 1000Base-T. * *	Revision 1.21  1999/03/25 07:46:11  malthoff *	Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers. * *	Revision 1.20  1999/03/12 13:36:09  malthoff *	Remove __STDC__. * *	Revision 1.19  1998/12/10 12:22:54  gklug *	fix: RX_PAGE must be in interrupt mask * *	Revision 1.18  1998/12/10 10:36:36  gklug *	fix: swap of pause bits * *	Revision 1.17  1998/11/18 13:21:45  gklug *	fix: Default interrupt mask * *	Revision 1.16  1998/10/29 15:53:21  gklug *	fix: Default mask uses ASS (GP0) signal * *	Revision 1.15  1998/10/28 13:52:52  malthoff *	Add new bits in RX_CMD register. * *	Revision 1.14  1998/10/19 15:34:53  gklug *	fix: typos * *	Revision 1.13  1998/10/14 07:19:03  malthoff *	bug fix: Every define which describes bit 31 *	must be declared as unsigned long 'UL'. *	fix bit definitions of PHY_AN_RFB and PHY_AN_PAUSE. *	Remove ANP defines. Rework the RFB defines. * *	Revision 1.12  1998/10/14 06:22:44  cgoos *	Changed shifted constant to ULONG. * *	Revision 1.11  1998/10/14 05:43:26  gklug *	add: shift pause coding *	fix: PAUSE bits definition * *	Revision 1.10  1998/10/13 09:19:21  malthoff *	Again change XMR_FS_ANY_ERR because of new info from XaQti. * *	Revision 1.9  1998/10/09 07:58:30  malthoff *	Add XMR_FS_FCS_ERR to XMR_FS_ANY_ERR. * *	Revision 1.8  1998/10/09 07:18:17  malthoff *	bug fix of a bug fix: XM_PAUSE_MODE and XM_DEF_MODE *	are not inverted! Bug XM_DEF_MSK is inverted. * *	Revision 1.7  1998/10/05 08:04:32  malthoff *	bug fix: XM_PAUSE_MODE and XM_DEF_MODE *	must be inverted declarations. * *	Revision 1.6  1998/09/28 13:38:18  malthoff *	Add default modes and masks XM_DEF_MSK, *	XM_PAUSE_MODE and XM_DEF_MODE * *	Revision 1.5  1998/09/16 14:42:04  malthoff *	Bug Fix: XM_GP_PORT is a 32 bit (not a 16 bit) register. * *	Revision 1.4  1998/08/20 14:59:47  malthoff *	Rework this file after reading the XaQti data sheet *	"Differences between Rev. B2 & Rev. C XMAC II". *	This file is now 100% XMAC II Rev. C complained. * *	Revision 1.3  1998/06/29 12:18:23  malthoff *	Correct XMR_FS_ANY_ERR definition. * *	Revision 1.2  1998/06/29 12:10:56  malthoff *	Add define XMR_FS_ANY_ERR. * *	Revision 1.1  1998/06/19 13:37:17  malthoff *	created. * * ******************************************************************************/#ifndef __INC_XMAC_H#define __INC_XMAC_H#ifdef __cplusplusextern "C" {#endif	/* __cplusplus *//* defines ********************************************************************//* * XMAC II registers * * The XMAC registers are 16 or 32 bits wide. * The XMACs host processor interface is set to 16 bit mode, * therefore ALL registers will be addressed with 16 bit accesses. * * The following macros are provided to access the XMAC registers * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(), * XM_INHASH(), and XM_OUTHASH(). * The macros are defined in SkGeHw.h. * * Note:	NA reg	= Network Address e.g DA, SA etc. * */#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */	/* 0x0004:		reserved */#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */	/* 0x0018 - 0x001e:	reserved */#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */	/* 0x003c: 		reserved */#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */	/* 0x0050 - 0x005e:	reserved */#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */	/* 0x006e: 		reserved */#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */	/* 				use the XM_EXM() macro to address */#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */	/*	 * XM_EXM(Reg)	 *	 * returns the XMAC address offset of specified Exact Match Addr Reg	 *	 * para:	Reg	EXM register to addr	(0 .. 15)