#define	SK_RLMT_SPT_ROOT_ID0			0xFF	/* Lowest possible priority. */#define	SK_RLMT_SPT_ROOT_ID1			0xFF	/* Lowest possible priority. *//* Remaining 6 bytes will be the current port address. */#define	SK_RLMT_SPT_ROOT_PATH_COST0		0x00#define	SK_RLMT_SPT_ROOT_PATH_COST1		0x00#define	SK_RLMT_SPT_ROOT_PATH_COST2		0x00#define	SK_RLMT_SPT_ROOT_PATH_COST3		0x00#define	SK_RLMT_SPT_BRIDGE_ID0			0xFF	/* Lowest possible priority. */#define	SK_RLMT_SPT_BRIDGE_ID1			0xFF	/* Lowest possible priority. *//* Remaining 6 bytes will be the current port address. */#define	SK_RLMT_SPT_PORT_ID0			0xFF	/* Lowest possible priority. */#define	SK_RLMT_SPT_PORT_ID1			0xFF	/* Lowest possible priority. */#define	SK_RLMT_SPT_MSG_AGE0			0x00#define	SK_RLMT_SPT_MSG_AGE1			0x00#define	SK_RLMT_SPT_MAX_AGE0			0x00#define	SK_RLMT_SPT_MAX_AGE1			0xFF#define	SK_RLMT_SPT_HELLO_TIME0			0x00#define	SK_RLMT_SPT_HELLO_TIME1			0xFF#define	SK_RLMT_SPT_FWD_DELAY0			0x00#define	SK_RLMT_SPT_FWD_DELAY1			0x40/* Size defines. */#define SK_RLMT_MIN_PACKET_SIZE			34#define SK_RLMT_MAX_PACKET_SIZE			(SK_RLMT_MAX_TX_BUF_SIZE)#define SK_PACKET_DATA_LEN				(SK_RLMT_MAX_PACKET_SIZE - \										SK_RLMT_MIN_PACKET_SIZE)/* ----- RLMT packet types ----- */#define SK_PACKET_ANNOUNCE				1	/* Port announcement. */#define SK_PACKET_ALIVE					2	/* Alive packet to port. */#define SK_PACKET_ADDR_CHANGED			3	/* Port address changed. */#define SK_PACKET_CHECK_TX				4	/* Check your tx line. */#ifdef SK_LITTLE_ENDIAN#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \	SK_U8	*_Addr = (SK_U8*)(Addr); \	SK_U16	_Val = (SK_U16)(Val); \	*_Addr++ = (SK_U8)(_Val >> 8); \	*_Addr = (SK_U8)(_Val & 0xFF); \}#endif	/* SK_LITTLE_ENDIAN */#ifdef SK_BIG_ENDIAN#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val))#endif	/* SK_BIG_ENDIAN */#define AUTONEG_FAILED	SK_FALSE#define AUTONEG_SUCCESS	SK_TRUE/* typedefs *******************************************************************//* RLMT packet.  Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */typedef struct s_RlmtPacket {	SK_U8	DstAddr[SK_MAC_ADDR_LEN];	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];	SK_U8	TypeLen[2];	SK_U8	DSap;	SK_U8	SSap;	SK_U8	Ctrl;	SK_U8	Indicator[7];	SK_U8	RlmtPacketType[2];	SK_U8	Align1[2];	SK_U8	Random[4];				/* Random value of requesting(!) station. */	SK_U8	RlmtPacketVersion[2];	/* RLMT Packet version. */	SK_U8	Data[SK_PACKET_DATA_LEN];} SK_RLMT_PACKET;typedef struct s_SpTreeRlmtPacket {	SK_U8	DstAddr[SK_MAC_ADDR_LEN];	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];	SK_U8	TypeLen[2];	SK_U8	DSap;	SK_U8	SSap;	SK_U8	Ctrl;	SK_U8	ProtocolId[2];	SK_U8	ProtocolVersionId;	SK_U8	BpduType;	SK_U8	Flags;	SK_U8	RootId[8];	SK_U8	RootPathCost[4];	SK_U8	BridgeId[8];	SK_U8	PortId[2];	SK_U8	MessageAge[2];	SK_U8	MaxAge[2];	SK_U8	HelloTime[2];	SK_U8	ForwardDelay[2];} SK_SPTREE_PACKET;/* global variables ***********************************************************/SK_MAC_ADDR	SkRlmtMcAddr =	{{0x01,  0x00,  0x5A,  0x52,  0x4C,  0x4D}};SK_MAC_ADDR	BridgeMcAddr =	{{0x01,  0x80,  0xC2,  0x00,  0x00,  0x00}};SK_MAC_ADDR	BcAddr = 		{{0xFF,  0xFF,  0xFF,  0xFF,  0xFF,  0xFF}};/* local variables ************************************************************//* None. *//* functions ******************************************************************/RLMT_STATIC void	SkRlmtCheckSwitch(	SK_AC	*pAC,	SK_IOC	IoC,	SK_U32	NetIdx);RLMT_STATIC void	SkRlmtCheckSeg(	SK_AC	*pAC,	SK_IOC	IoC,	SK_U32	NetIdx);RLMT_STATIC void	SkRlmtEvtSetNets(	SK_AC		*pAC,	SK_IOC		IoC,	SK_EVPARA	Para);/****************************************************************************** * *	SkRlmtInit - initialize data, set state to init * * Description: * *	SK_INIT_DATA *	============ * *	This routine initializes all RLMT-related variables to a known state. *	The initial state is SK_RLMT_RS_INIT. *	All ports are initialized to SK_RLMT_PS_INIT. * * *	SK_INIT_IO *	========== * *	Nothing. * * *	SK_INIT_RUN *	=========== * *	Determine the adapter's random value. *	Set the hw registers, the "logical MAC address", the *	RLMT multicast address, and eventually the BPDU multicast address. * * Context: *	init, pageable * * Returns: *	Nothing. */void	SkRlmtInit(SK_AC	*pAC,	/* Adapter Context */SK_IOC	IoC,	/* I/O Context */int		Level)	/* Initialization Level */{	SK_U32		i, j;	SK_U64		Random;	SK_EVPARA	Para;    SK_MAC_ADDR		VirtualMacAddress;    SK_MAC_ADDR		PhysicalAMacAddress;    SK_BOOL		VirtualMacAddressSet;    SK_BOOL		PhysicalAMacAddressSet;	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,		("RLMT Init level %d.\n", Level))	switch (Level) {	case SK_INIT_DATA:	/* Initialize data structures. */		SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT));		for (i = 0; i < SK_MAX_MACS; i++) {			pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT;			pAC->Rlmt.Port[i].LinkDown = SK_TRUE;			pAC->Rlmt.Port[i].PortDown = SK_TRUE;			pAC->Rlmt.Port[i].PortStarted = SK_FALSE;			pAC->Rlmt.Port[i].PortNoRx = SK_FALSE;			pAC->Rlmt.Port[i].RootIdSet = SK_FALSE;			pAC->Rlmt.Port[i].PortNumber = i;			pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0];			pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i];		}		pAC->Rlmt.NumNets = 1;		for (i = 0; i < SK_MAX_NETS; i++) {			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* Automatic. */			/* Just assuming. */			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;			pAC->Rlmt.Net[i].NetNumber = i;		}		pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0];		pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1];#if SK_MAX_NETS > 1		pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1];#endif	/* SK_MAX_NETS > 1 */		break;	case SK_INIT_IO:	/* GIMacsFound first available here. */		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,			("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound))		pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;		/* Initialize HW registers? */		if (pAC->GIni.GIMacsFound == 1) {			Para.Para32[0] = SK_RLMT_MODE_CLS;			Para.Para32[1] = 0;			(void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para);		}		break;	case SK_INIT_RUN:		/* Ensure RLMT is set to one net. */		if (pAC->Rlmt.NumNets > 1) {			Para.Para32[0] = 1;			Para.Para32[1] = -1;			SkRlmtEvtSetNets(pAC, IoC, Para);		}		for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {			Random = SkOsGetTime(pAC);			*(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random;			for (j = 0; j < 4; j++) {				pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort->					CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j];			}			(void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY);			/* Add RLMT MC address. */			(void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT);			if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) {				/* Add BPDU MC address. */				(void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT);			}			(void)SkAddrMcUpdate(pAC, IoC, i);		}	VirtualMacAddressSet = SK_FALSE;		/* Read virtual MAC address from Control Register File. */		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {	    SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]);	    VirtualMacAddressSet |= VirtualMacAddress.a[j];		}	PhysicalAMacAddressSet = SK_FALSE;		/* Read physical MAC address for MAC A from Control Register File. */		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {	    SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]);	    PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j];		}	/* check if the two mac addresses contain reasonable values */	if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) {	    pAC->Rlmt.RlmtOff = SK_TRUE;	}	/* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD	   and the RLMT_LOOKAHEAD macros */	else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) {	    pAC->Rlmt.RlmtOff = SK_TRUE;	}		else {			pAC->Rlmt.RlmtOff = SK_FALSE;		}		break;	default:	/* error */		break;	}	return;}	/* SkRlmtInit *//****************************************************************************** * *	SkRlmtBuildCheckChain - build the check chain * * Description: *	This routine builds the local check chain: *	- Each port that is up checks the next port. *	- The last port that is up checks the first port that is up. * * Notes: *	- Currently only local ports are considered when building the chain. *	- Currently the SuspectState is just reset; *	  it would be better to save it ... * * Context: *	runtime, pageable? * * Returns: *	Nothing */RLMT_STATIC void	SkRlmtBuildCheckChain(SK_AC	*pAC,	/* Adapter Context */SK_U32	NetIdx)	/* Net Number */{	SK_U32			i;	SK_U32			NumMacsUp;	SK_RLMT_PORT *	FirstMacUp;	SK_RLMT_PORT *	PrevMacUp;	FirstMacUp	= NULL;	PrevMacUp	= NULL;	if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {		for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) {			pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;		}		return;	/* Done. */	}	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,		("SkRlmtBuildCheckChain.\n"))	NumMacsUp = 0;	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {		pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;		pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0;		pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &=			~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX);		/*		 * If more than two links are detected we should consider		 * checking at least two other ports:		 * 1. the next port that is not LinkDown and		 * 2. the next port that is not PortDown.		 */		if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {			if (NumMacsUp == 0) {				FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i];			}			else {				PrevMacUp->PortCheck[					pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr =					pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress;				PrevMacUp->PortCheck[					PrevMacUp->PortsChecked].SuspectTx = SK_FALSE;				PrevMacUp->PortsChecked++;			}			PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i];			NumMacsUp++;		}	}	if (NumMacsUp > 1) {		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr =			FirstMacUp->AddrPort->CurrentMacAddress;		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx =			SK_FALSE;		PrevMacUp->PortsChecked++;	}#ifdef DEBUG	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,			("Port %d checks %d other ports: %2X.\n", i,				pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked,				pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5]))	}#endif	/* DEBUG */	return;}	/* SkRlmtBuildCheckChain *//****************************************************************************** * *	SkRlmtBuildPacket - build an RLMT packet * * Description: *	This routine sets up an RLMT packet. * * Context: *	runtime, pageable? * * Returns: *	NULL or pointer to RLMT mbuf */RLMT_STATIC SK_MBUF	*SkRlmtBuildPacket(SK_AC		*pAC,		/* Adapter Context */SK_IOC		IoC,		/* I/O Context */SK_U32		PortNumber,	/* Sending port */SK_U16		PacketType,	/* RLMT packet type */SK_MAC_ADDR	*SrcAddr,	/* Source address */SK_MAC_ADDR	*DestAddr)	/* Destination address */{	int		i;	SK_U16		Length;	SK_MBUF		*pMb;	SK_RLMT_PACKET	*pPacket;#ifdef DEBUG	SK_U8	CheckSrc  = 0;	SK_U8	CheckDest = 0;	for (i = 0; i < SK_MAC_ADDR_LEN; ++i) {		CheckSrc  |= SrcAddr->a[i];		CheckDest |= DestAddr->a[i];	}	if ((CheckSrc == 0) || (CheckDest == 0)) {		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR,			("SkRlmtBuildPacket: Invalid %s%saddr.\n",			 (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : "")))	}#endif	if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) {		pPacket = (SK_RLMT_PACKET*)pMb->pData;		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {			pPacket->DstAddr[i] = DestAddr->a[i];			pPacket->SrcAddr[i] = SrcAddr->a[i];		}		pPacket->DSap = SK_RLMT_DSAP;		pPacket->SSap = SK_RLMT_SSAP;		pPacket->Ctrl = SK_RLMT_CTRL;		pPacket->Indicator[0] = SK_RLMT_INDICATOR0;		pPacket->Indicator[1] = SK_RLMT_INDICATOR1;		pPacket->Indicator[2] = SK_RLMT_INDICATOR2;		pPacket->Indicator[3] = SK_RLMT_INDICATOR3;		pPacket->Indicator[4] = SK_RLMT_INDICATOR4;		pPacket->Indicator[5] = SK_RLMT_INDICATOR5;		pPacket->Indicator[6] = SK_RLMT_INDICATOR6;