## A wireless lan scenario with audio, video traffic over udp and background# backlogged traffic(TCP, udp)### defaults#set ppktsize 1280				;# pktsize of phone streams#set pinterval 5msset ppktsize 160				;# pktsize of phone streamsset pinterval 20msset vpktsize 1280				;# pktsize of video streamsset vinterval 10msset pktsize 200				;# pktsize for background trafficset udp_interval 12.5ms#set num_nodes [lindex $argv 0]	;#  number of mobilenodes in the scenario  ****lamiasource sources.tclglobal num_nodesset num_bss_nodes 0				;# adhoc modePLevels set max_plevels_	3PLevels set plevels_			3PHY_MIB set CWMin_0				5PHY_MIB set CWOffset_0		0PHY_MIB set CWMax_0		   200           ;#LamiaPHY_MIB set CWMin_1				15PHY_MIB set CWOffset_1		0PHY_MIB set CWMax_1				600                ;#LamiaPHY_MIB set CWMin_2				31PHY_MIB set CWOffset_2		0PHY_MIB set CWMax_2				1023         ;#Lamia# MAC_MIB set new_method 1  ;# ni: difs_i is used as DIFS= SIFS + i* Slot_timeset difs_0 1set difs_1 2set difs_2 3proc create_scenario { } {	global ns_ node_ num_nodes endtime	global pnum ppktsize pinterval 	global vnum vpktsize vinterval udp_interval 	global pktsize		set pri 0# real ending time		set endtime 15	#set t 0	set fl_id 0	set rng  [new RNG]  #$rng seed 0	$rng uniform 0 1##########################################################	# Setup Phone flows	for {set i 0} {$i <[expr $num_nodes ] } {incr i} {	                  #in oder to get right ARP and correct results, we need to start the simulation after 3 seconds	 #set start_time 3   set start_time [expr 3+ [$rng uniform 0 0.002]]             		    		set  node_src	$i				if {$i < [expr $num_nodes - 1]} {		 set  node_sink	[expr $i +1] 		} else {		  set  node_sink 0		}						  set finishtime  [expr $endtime - 0]						build-cbr $node_($node_src) $node_($node_sink) $ppktsize $pinterval 0 $fl_id $start_time  $finishtime  $pri				puts "P$i with pktsize $ppktsize flows $fl_id from Node$node_src to Node$node_sink every $pinterval"    		puts "node $i flow $fl_id's starting time is: $start_time"		incr fl_id		                # interval is used for every this period we increase one station                  set incr_interval 2 			    }		#set t 0	incr pri########################################################################################			# Setup Video flows	for {set i 0} {$i < [expr $num_nodes]} {incr i} {                				#set start_time 3				set start_time [expr 3+ [$rng uniform 0 0.005]]	  set  node_src	$i			    if {$i < [expr $num_nodes - 1]} {		 set  node_sink	[expr $i +1] 		} else {		  set  node_sink 0		}						  set finishtime  [expr $endtime - 0 ]						build-cbr $node_($node_src) $node_($node_sink) $vpktsize $vinterval 0 $fl_id $start_time  $finishtime $pri				puts "V$i with pktsize $vpktsize flows $fl_id  from Node$i to Node $node_sink every $vinterval"    		puts $start_time		incr fl_id			        set incr_interval 2 		#set t [expr $t + $incr_interval]	}  incr pri ################### trafic to one station		#########################		# Setup Background flows  puts "TCP and UDP priority is $pri"		for {set i 0} { $i < $num_nodes} {incr i} {		  set start_time [expr 3 + [$rng uniform 0 0.01]]	  set  node_src	$i				if {$i < [expr $num_nodes - 1]} {		 set  node_sink	[expr $i +1]		 		} else {		  set  node_sink 0		}		set finishtime  [expr $endtime - 0 ]	build-cbr $node_($node_src) $node_($node_sink) $pktsize $udp_interval 0 $fl_id $start_time $finishtime $pri	#build-tcp "TCP" $node_($node_src) $node_($node_sink) $pktsize 20 $fl_id $start_time $endtime $fl_id $pri 					puts "B$i with pktsize $pktsize flows $fl_id  from Node$i to Node $node_sink every $udp_interval"			 				puts $start_time				incr fl_id			}}