/****************************************Copyright (c)**************************************************
**                               Guangzhou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			sdhal.h
** Last modified Date:	2005-3-11
** Last Version:		V2.0
** Descriptions:		SD/MMC卡讀寫模塊 ---- SPI操作函數頭文件
**						Soft Packet of SD/MMC Card: hard abstrast layer ---- function of SPI operation 
**																			 header file
**------------------------------------------------------------------------------------------------------
** Created by:			Ming Yuan Zheng
** Created date:		2005-1-6
** Version:				V1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			
** Modified date:		
** Version:				
** Descriptions:		
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#ifndef __SDHAL_H__
#define __SDHAL_H__

/* 檢測卡是否完全插入  check weather card is insert entirely */
extern INT8U SD_ChkCard(void);

/* 檢測卡是否寫保護  check weather card is write protect */
extern INT8U SD_ChkCardWP(void);

/* 初始化訪問SD卡的硬件初始化 initialize the hardware that access sd card */
extern void SD_HardWareInit(void);

/* 設置SPI的時鐘小于400kHZ set the clock of SPI less than 400kHZ */
extern void SPI_Clk400k(void);

/* 設置SPI的clock到最大值 set the clock of SPI to maximum */
extern void SPI_ClkToMax(void);

/* 通過SPI接口發送一個字節 send a byte by SPI interface */
extern void SPI_SendByte(INT8U byte);

/* 從SPI接口接收一個字節 receive a byte from SPI interface */
extern INT8U SPI_RecByte(void);

/* 片選SPI從機 select the SPI slave */
extern void SPI_CS_Assert(void);

/* 不片選SPI從機 not select the SPI slave */
extern void SPI_CS_Deassert(void);

#endif