/* * Copyright (c) 1997 Yen Yen Lim and North Dakota State University * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *      This product includes software developed by Yen Yen Lim and        North Dakota State University * 4. The name of the author may not be used to endorse or promote products *    derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * @(#) $Header: /tcpdump/master/tcpdump/atmuni31.h,v 1.2.6.1 2007-10-22 19:39:12 guy Exp $ (LBL) *//* Based on UNI3.1 standard by ATM Forum *//* ATM traffic types based on VPI=0 and (the following VCI */#define VCI_PPC			0x05	/* Point-to-point signal msg */#define VCI_BCC			0x02	/* Broadcast signal msg */#define VCI_OAMF4SC		0x03	/* Segment OAM F4 flow cell */#define VCI_OAMF4EC		0x04	/* End-to-end OAM F4 flow cell */#define VCI_METAC		0x01	/* Meta signal msg */#define VCI_ILMIC		0x10	/* ILMI msg *//* Q.2931 signalling messages */#define CALL_PROCEED		0x02	/* call proceeding */#define CONNECT			0x07	/* connect */#define CONNECT_ACK		0x0f	/* connect_ack */#define SETUP			0x05	/* setup */#define RELEASE			0x4d	/* release */#define RELEASE_DONE		0x5a	/* release_done */#define RESTART			0x46	/* restart */#define RESTART_ACK		0x4e	/* restart ack */#define STATUS			0x7d	/* status */#define STATUS_ENQ		0x75	/* status ack */#define ADD_PARTY		0x80	/* add party */#define ADD_PARTY_ACK		0x81	/* add party ack */#define ADD_PARTY_REJ		0x82	/* add party rej */#define DROP_PARTY		0x83	/* drop party */#define DROP_PARTY_ACK		0x84	/* drop party ack *//* Information Element Parameters in the signalling messages */#define CAUSE			0x08	/* cause */#define ENDPT_REF		0x54	/* endpoint reference */#define AAL_PARA		0x58	/* ATM adaptation layer parameters */#define TRAFF_DESCRIP		0x59	/* atm traffic descriptors */#define CONNECT_ID		0x5a	/* connection identifier */#define QOS_PARA		0x5c	/* quality of service parameters */#define B_HIGHER		0x5d	/* broadband higher layer information */#define B_BEARER		0x5e	/* broadband bearer capability */#define B_LOWER			0x5f	/* broadband lower information */#define CALLING_PARTY		0x6c	/* calling party number */#define CALLED_PARTY		0x70	/* called party nmber */#define Q2931			0x09/* Q.2931 signalling general messages format */#define PROTO_POS       0	/* offset of protocol discriminator */#define CALL_REF_POS    2	/* offset of call reference value */#define MSG_TYPE_POS    5	/* offset of message type */#define MSG_LEN_POS     7	/* offset of mesage length */#define IE_BEGIN_POS    9	/* offset of first information element *//* format of signalling messages */#define TYPE_POS	0#define LEN_POS		2#define FIELD_BEGIN_POS 4