.TH HCIATTACH 8 "Jan 22 2002" BlueZ "Linux System Administration".SH NAMEhciattach \- attach serial devices via UART HCI to BlueZ stack.SH SYNOPSIS.B hciattach.RB [\| \-n \|].RB [\| \-p \|].RB [\| \-t .IR timeout \|].I tty.IR type \||\| id.I speed.I flow.I bdaddr.SH DESCRIPTION.LPHciattach is used to attach a serial UART to the Bluetooth stack as HCItransport interface..SH OPTIONS.TP.B \-nDon't detach from controlling terminal..TP.B \-pPrint the PID when detaching..TP.BI \-t " timeout"Specify an initialization timeout.  (Default is 5 seconds.).TP.I ttyThis specifies the serial device to attach. A leading.B /devcan be omitted. Examples:.B /dev/ttyS1.B ttyS2.TP.IR type \||\| idThe.I typeor.I idof the Bluetooth device that is to be attached, i.e. vendor or other devicespecific identifier. Currently supported types are.RS.TP.B type.B description.TP.B anyUnspecified HCI_UART interface, no vendor specific options.TP.B ericssonEricsson based modules.TP.B digiDigianswer based cards.TP.B xircomXircom PCMCIA cards: Credit Card Adapter and Real Port Adapter.TP.B csrCSR Casira serial adapter or BrainBoxes serial dongle (BL642).TP.B bboxesBrainBoxes PCMCIA card (BL620).TP.B swaveSilicon Wave kits.TP.B bcspSerial adapters using CSR chips with BCSP serial protocol.RESupported IDs are (manufacturer id, product id).RS.TP.B 0x0105, 0x080aXircom PCMCIA cards: Credit Card Adapter and Real Port Adapter.TP.B 0x0160, 0x0002BrainBoxes PCMCIA card (BL620).RE.TP.I speedThe.I speedspecifies the UART speed to use. Baudrates higher than 115.200bps requirevendor specific initializations that are not implemented for all types ofdevices. In general the following speeds are supported:.B 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600Supported vendor devices are automatically initialised to their respectivebest settings..TP.I flowIf the keyword.I flowis appended to the list of options then hardware flow control is forced onthe serial link (.B CRTSCTS). All above mentioned device types have.B flowset by default. To force no flow control use.B noflowinstead..TP.I bdaddrThe .I bdaddrspecifies the Bluetooth Address to use.  Some devices (like the STLC2500) do not store the Bluetooth address in hardware memory.  Instead it must be uploaded during the initialization process.  If this argumentis specified, then the address will be used to initialize the device.Otherwise, a default address will be used..SH AUTHORSWritten by Maxim Krasnyansky <maxk@qualcomm.com>.PPManual page by Nils Faerber <nils@kernelconcepts.de>