本試驗需要使用仿真器

1。連接好仿真器，并使用ADS打開工程。
2。連接試驗板的串口0到PC的串口，在PC端打開超級終端軟件。
3。編譯并運行工程。
4。在超級終端會顯示如下提示(按任意鍵繼續):

    GPRS/GPS TEST
    Press any key to continue...
	
5。主菜單：
    ======== Menu ========
    [1] Run GPRS test
    [2] Run GPS test
    Select:

6。選擇2 進入GPS試驗：
   
    進入試驗后會連續接收到GPS信息，如下所示：

$GPGGA,115411.576,3957.3402,N,11621.3273,E,1,07,2.0,89.9,M,-8.6,M,,*7A
$GPGSA,A,3,24,02,04,,17,,07,05,30,,,,3.4,2.0,2.8*3A
$GPGSV,3,1,11,24,68,025,41,02,62,319,36,04,57,062,37,10,42,230,*79
$GPGSV,3,2,11,17,40,290,43,13,33,064,,07,23,148,27,05,24,268,43*70
$GPGSV,3,3,11,30,18,299,41,23,12,039,,31,07,144,,,,,*48
$GPRMC,115411.576,A,3957.3402,N,11621.3273,E,0.0,231.9,181204,,*0C
$GPGGA,115412.576,3957.3401,N,11621.3273,E,1,06,3.2,89.8,M,-8.6,M,,*79
$GPGSA,A,3,24,02,04,,17,,07,05,30,,,,4.4,3.2,3.1*36
$GPGSV,3,1,11,24,68,025,41,02,62,319,36,04,57,062,36,10,42,230,*78
$GPGSV,3,2,11,17,40,290,43,13,33,064,,07,23,148,27,05,24,268,43*70
$GPGSV,3,3,11,30,18,299,41,23,12,039,,31,07,144,,,,,*48
$GPRMC,115412.576,A,3957.3401,N,11621.3273,E,0.0,231.9,181204,,*0C
$GPGGA,115413.576,3957.3402,N,11621.3274,E,1,07,2.0,89.8,M,-8.6,M,,*7E
$GPGSA,A,3,24,02,04,,17,,07,05,30,,,,3.4,2.0,2.8*3A
$GPGSV,3,1,11,24,68,025,41,02,62,319,36,04,57,062,36,10,42,230,*78
$GPGSV,3,2,11,17,40,290,43,13,33,064,,07,23,148,28,05,24,268,43*7F
$GPGSV,3,3,11,30,18,299,41,23,12,039,,31,07,144,,,,,*48
$GPRMC,115413.576,A,3957.3402,N,11621.3274,E,0.0,231.9,181204,,*09
$GPGGA,115414.576,3957.3401,N,11621.3274,E,1,06,3.2,89.8,M,-8.6,M,,*78
$GPGSA,A,3,24,02,04,,17,,,05,30,,,,4.4,3.2,3.1*31
$GPGSV,3,1,11,24,68,025,41,02,62,319,36,04,57,062,36,10,42,230,*78
$GPGSV,3,2,11,17,40,290,42,13,33,064,,07,23,148,28,05,24,268,43*7E
$GPGSV,3,3,11,30,18,299,41,23,12,039,,31,07,144,,,,,*48
$GPRMC,115414.576,A,3957.3401,N,11621.3274,E,0.0,231.9,181204,,*0D