<AVRPART>
	<FUSE>
		<LOW>
			<NMB_TEXT>3</NMB_TEXT>
			<TEXT1>
				<MASK>0x20</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Serial program downloading (SPI) enabled</TEXT>
			</TEXT1>
			<TEXT2>
				<MASK>0x01</MASK>
				<VALUE>0x00</VALUE>
				<TEXT>Internal RC oscillator enabled</TEXT>
			</TEXT2>
			<TEXT3>
				<MASK>0x01</MASK>
				<VALUE>0x01</VALUE>
				<TEXT>External clock enabled</TEXT>
			</TEXT3>
		</LOW>
	</FUSE><PROGRAMMING>
		<ISPInterface>
			<NoFuseProg/>
			<NoFuseLockRead/>
			<LockReadMask>0x00</LockReadMask>
			<FuseReadMask>0x00</FuseReadMask>
			<FuseProgMask>0x00</FuseProgMask>
			<NMB_Warn>1</NMB_Warn>
			<FuseWarning>0,0x20,0x20,703</FuseWarning>
		</ISPInterface>
		<OscCal>
		</OscCal>
		<FlashPageSize>0</FlashPageSize>
		<EepromPageSize>0</EepromPageSize>
	</PROGRAMMING>
	<LOCKBIT>
		<TEXT>[LB1 = 1 :  LB2 = 1] No memory lock features enabled. [LB1 = 0 :  LB2 = 1] Further programming of Flash and EEPROM is enabled. [LB1 = 0 :  LB2 = 0] Same as previous, but verify is also disabled</TEXT>
		<NMB_TEXT>3</NMB_TEXT>
		<NMB_LOCK_BITS>2</NMB_LOCK_BITS>
		<TEXT1>
			<MASK>0x06</MASK>
			<VALUE>0x06</VALUE>
			<TEXT>Mode 1: No memory lock features enabled</TEXT>
		</TEXT1>
		<TEXT2>
			<MASK>0x06</MASK>
			<VALUE>0x04</VALUE>
			<TEXT>Mode 2: Further programming disabled</TEXT>
		</TEXT2>
		<TEXT3>
			<MASK>0x06</MASK>
			<VALUE>0x00</VALUE>
			<TEXT>Mode 3: Further programming and verification disabled</TEXT>
		</TEXT3>
		<LOCKBIT0>
			<NAME>LB1</NAME>
			<TEXT>Lockbit</TEXT>
		</LOCKBIT0>
		<LOCKBIT1>
			<NAME>LB2</NAME>
			<TEXT>Lockbit</TEXT>
		</LOCKBIT1>
	</LOCKBIT>
</AVRPART>