{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.0 Build 148 04/26/2005 SJ Full Version " "Info: Version 5.0 Build 148 04/26/2005 SJ Full Version" {  } {  } 0} { "Info" "IQEXE_START_BANNER_TIME" "Thu Aug 29 08:48:45 2013 " "Info: Processing started: Thu Aug 29 08:48:45 2013" {  } {  } 0}  } {  } 4}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off lbstry -c lbstry " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off lbstry -c lbstry" {  } {  } 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "lbstry EP1C3T144C8 " "Info: Selected device EP1C3T144C8 for design \"lbstry\"" {  } {  } 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices. " { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C6T144C8 " "Info: Device EP1C6T144C8 is compatible" {  } {  } 2}  } {  } 2}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1 MHz " "Info: Assuming a global fmax requirement of 1 MHz" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 0}
{ "Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources." {  } {  } 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "CLK Global clock in PIN 47 " "Info: Automatically promoted signal \"CLK\" to use Global clock in PIN 47" {  } { { "lbstry.bdf" "" { Schematic "C:/Users/lbs/Desktop/quartus進行數字鐘編程/lbstry.bdf" { { 224 -16 152 240 "CLK" "" } } } }  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Info: Started Fast Input/Output/OE register processing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Info: Finished Fast Input/Output/OE register processing" {  } {  } 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0}
{ "Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "6.013 ns register register " "Info: Estimated most critical path is register to register delay of 6.013 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns 74161:inst\|f74161:sub\|9 1 REG LAB_X3_Y1 4 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X3_Y1; Fanout = 4; REG Node = '74161:inst\|f74161:sub\|9'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "" { 74161:inst|f74161:sub|9 } "NODE_NAME" } "" } } { "f74161.bdf" "" { Schematic "d:/altera/quartus50/libraries/others/maxplus2/f74161.bdf" { { 128 640 704 208 "9" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.377 ns) + CELL(0.590 ns) 0.967 ns inst9~70 2 COMB LAB_X4_Y1 7 " "Info: 2: + IC(0.377 ns) + CELL(0.590 ns) = 0.967 ns; Loc. = LAB_X4_Y1; Fanout = 7; COMB Node = 'inst9~70'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.967 ns" { 74161:inst|f74161:sub|9 inst9~70 } "NODE_NAME" } "" } } { "lbstry.bdf" "" { Schematic "C:/Users/lbs/Desktop/quartus進行數字鐘編程/lbstry.bdf" { { 208 536 584 272 "inst9" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.075 ns) + CELL(0.590 ns) 1.632 ns inst15~24 3 COMB LAB_X4_Y1 6 " "Info: 3: + IC(0.075 ns) + CELL(0.590 ns) = 1.632 ns; Loc. = LAB_X4_Y1; Fanout = 6; COMB Node = 'inst15~24'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.665 ns" { inst9~70 inst15~24 } "NODE_NAME" } "" } } { "lbstry.bdf" "" { Schematic "C:/Users/lbs/Desktop/quartus進行數字鐘編程/lbstry.bdf" { { 480 536 584 544 "inst15" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.223 ns) + CELL(0.442 ns) 2.297 ns inst17~20 4 COMB LAB_X4_Y1 5 " "Info: 4: + IC(0.223 ns) + CELL(0.442 ns) = 2.297 ns; Loc. = LAB_X4_Y1; Fanout = 5; COMB Node = 'inst17~20'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.665 ns" { inst15~24 inst17~20 } "NODE_NAME" } "" } } { "lbstry.bdf" "" { Schematic "C:/Users/lbs/Desktop/quartus進行數字鐘編程/lbstry.bdf" { { 784 536 584 848 "inst17" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.223 ns) + CELL(0.442 ns) 2.962 ns inst17 5 COMB LAB_X4_Y1 4 " "Info: 5: + IC(0.223 ns) + CELL(0.442 ns) = 2.962 ns; Loc. = LAB_X4_Y1; Fanout = 4; COMB Node = 'inst17'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.665 ns" { inst17~20 inst17 } "NODE_NAME" } "" } } { "lbstry.bdf" "" { Schematic "C:/Users/lbs/Desktop/quartus進行數字鐘編程/lbstry.bdf" { { 784 536 584 848 "inst17" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.223 ns) + CELL(0.442 ns) 3.627 ns 74161:inst3\|f74161:sub\|80 6 COMB LAB_X4_Y1 2 " "Info: 6: + IC(0.223 ns) + CELL(0.442 ns) = 3.627 ns; Loc. = LAB_X4_Y1; Fanout = 2; COMB Node = '74161:inst3\|f74161:sub\|80'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.665 ns" { inst17 74161:inst3|f74161:sub|80 } "NODE_NAME" } "" } } { "f74161.bdf" "" { Schematic "d:/altera/quartus50/libraries/others/maxplus2/f74161.bdf" { { 248 320 384 288 "80" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.075 ns) + CELL(0.590 ns) 4.292 ns 74161:inst3\|f74161:sub\|84 7 COMB LAB_X4_Y1 2 " "Info: 7: + IC(0.075 ns) + CELL(0.590 ns) = 4.292 ns; Loc. = LAB_X4_Y1; Fanout = 2; COMB Node = '74161:inst3\|f74161:sub\|84'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.665 ns" { 74161:inst3|f74161:sub|80 74161:inst3|f74161:sub|84 } "NODE_NAME" } "" } } { "f74161.bdf" "" { Schematic "d:/altera/quartus50/libraries/others/maxplus2/f74161.bdf" { { 456 320 384 496 "84" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.599 ns) + CELL(0.292 ns) 5.183 ns 74161:inst3\|f74161:sub\|97~3 8 COMB LAB_X5_Y1 1 " "Info: 8: + IC(0.599 ns) + CELL(0.292 ns) = 5.183 ns; Loc. = LAB_X5_Y1; Fanout = 1; COMB Node = '74161:inst3\|f74161:sub\|97~3'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.891 ns" { 74161:inst3|f74161:sub|84 74161:inst3|f74161:sub|97~3 } "NODE_NAME" } "" } } { "f74161.bdf" "" { Schematic "d:/altera/quartus50/libraries/others/maxplus2/f74161.bdf" { { 560 320 384 600 "97" "" } } } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.223 ns) + CELL(0.607 ns) 6.013 ns 74161:inst3\|f74161:sub\|99 9 REG LAB_X5_Y1 3 " "Info: 9: + IC(0.223 ns) + CELL(0.607 ns) = 6.013 ns; Loc. = LAB_X5_Y1; Fanout = 3; REG Node = '74161:inst3\|f74161:sub\|99'" {  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "0.830 ns" { 74161:inst3|f74161:sub|97~3 74161:inst3|f74161:sub|99 } "NODE_NAME" } "" } } { "f74161.bdf" "" { Schematic "d:/altera/quartus50/libraries/others/maxplus2/f74161.bdf" { { 544 640 704 624 "99" "" } } } }  } 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "3.995 ns 66.44 % " "Info: Total cell delay = 3.995 ns ( 66.44 % )" {  } {  } 0} { "Info" "ITDB_TOTAL_IC_DELAY" "2.018 ns 33.56 % " "Info: Total interconnect delay = 2.018 ns ( 33.56 % )" {  } {  } 0}  } { { "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" "" { Report "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry_cmp.qrpt" Compiler "lbstry" "UNKNOWN" "V1" "C:/Users/lbs/Desktop/quartus進行數字鐘編程/db/lbstry.quartus_db" { Floorplan "C:/Users/lbs/Desktop/quartus進行數字鐘編程/" "" "6.013 ns" { 74161:inst|f74161:sub|9 inst9~70 inst15~24 inst17~20 inst17 74161:inst3|f74161:sub|80 74161:inst3|f74161:sub|84 74161:inst3|f74161:sub|97~3 74161:inst3|f74161:sub|99 } "NODE_NAME" } "" } }  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Thu Aug 29 08:48:48 2013 " "Info: Processing ended: Thu Aug 29 08:48:48 2013" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:03 " "Info: Elapsed time: 00:00:03" {  } {  } 0}  } {  } 0}