library verilog;use verilog.vl_types.all;entity cyclone_pll is    generic(        operation_mode  : string  := "normal";        qualify_conf_done: string  := "off";        compensate_clock: string  := "clk0";        pll_type        : string  := "auto";        scan_chain      : string  := "long";        lpm_type        : string  := "cyclone_pll";        clk0_multiply_by: integer := 1;        clk0_divide_by  : integer := 1;        clk0_phase_shift: integer := 0;        clk0_time_delay : integer := 0;        clk0_duty_cycle : integer := 50;        clk1_multiply_by: integer := 1;        clk1_divide_by  : integer := 1;        clk1_phase_shift: integer := 0;        clk1_time_delay : integer := 0;        clk1_duty_cycle : integer := 50;        clk2_multiply_by: integer := 1;        clk2_divide_by  : integer := 1;        clk2_phase_shift: integer := 0;        clk2_time_delay : integer := 0;        clk2_duty_cycle : integer := 50;        clk3_multiply_by: integer := 1;        clk3_divide_by  : integer := 1;        clk3_phase_shift: integer := 0;        clk3_time_delay : integer := 0;        clk3_duty_cycle : integer := 50;        clk4_multiply_by: integer := 1;        clk4_divide_by  : integer := 1;        clk4_phase_shift: integer := 0;        clk4_time_delay : integer := 0;        clk4_duty_cycle : integer := 50;        clk5_multiply_by: integer := 1;        clk5_divide_by  : integer := 1;        clk5_phase_shift: integer := 0;        clk5_time_delay : integer := 0;        clk5_duty_cycle : integer := 50;        extclk0_multiply_by: integer := 1;        extclk0_divide_by: integer := 1;        extclk0_phase_shift: integer := 0;        extclk0_time_delay: integer := 0;        extclk0_duty_cycle: integer := 50;        extclk1_multiply_by: integer := 1;        extclk1_divide_by: integer := 1;        extclk1_phase_shift: integer := 0;        extclk1_time_delay: integer := 0;        extclk1_duty_cycle: integer := 50;        extclk2_multiply_by: integer := 1;        extclk2_divide_by: integer := 1;        extclk2_phase_shift: integer := 0;        extclk2_time_delay: integer := 0;        extclk2_duty_cycle: integer := 50;        extclk3_multiply_by: integer := 1;        extclk3_divide_by: integer := 1;        extclk3_phase_shift: integer := 0;        extclk3_time_delay: integer := 0;        extclk3_duty_cycle: integer := 50;        primary_clock   : string  := "inclk0";        inclk0_input_frequency: integer := 10000;        inclk1_input_frequency: integer := 10000;        gate_lock_signal: string  := "no";        gate_lock_counter: integer := 1;        valid_lock_multiplier: integer := 5;        invalid_lock_multiplier: integer := 5;        switch_over_on_lossclk: string  := "off";        switch_over_on_gated_lock: string  := "off";        switch_over_counter: integer := 1;        enable_switch_over_counter: string  := "off";        feedback_source : string  := "extclk0";        bandwidth       : integer := 0;        bandwidth_type  : string  := "auto";        down_spread     : string  := "0.0";        spread_frequency: integer := 0;        common_rx_tx    : string  := "off";        rx_outclock_resource: string  := "auto";        use_vco_bypass  : string  := "false";        use_dc_coupling : string  := "false";        pfd_min         : integer := 0;        pfd_max         : integer := 0;        vco_min         : integer := 0;        vco_max         : integer := 0;        vco_center      : integer := 0;        m_initial       : integer := 1;        m               : integer := 0;        n               : integer := 1;        m2              : integer := 1;        n2              : integer := 1;        ss              : integer := 0;        l0_high         : integer := 1;        l0_low          : integer := 1;        l0_initial      : integer := 1;        l0_mode         : string  := "bypass";        l0_ph           : integer := 0;        l0_time_delay   : integer := 0;        l1_high         : integer := 1;        l1_low          : integer := 1;        l1_initial      : integer := 1;        l1_mode         : string  := "bypass";        l1_ph           : integer := 0;        l1_time_delay   : integer := 0;        g0_high         : integer := 1;        g0_low          : integer := 1;        g0_initial      : integer := 1;        g0_mode         : string  := "bypass";        g0_ph           : integer := 0;        g0_time_delay   : integer := 0;        g1_high         : integer := 1;        g1_low          : integer := 1;        g1_initial      : integer := 1;        g1_mode         : string  := "bypass";        g1_ph           : integer := 0;        g1_time_delay   : integer := 0;        g2_high         : integer := 1;        g2_low          : integer := 1;        g2_initial      : integer := 1;        g2_mode         : string  := "bypass";        g2_ph           : integer := 0;        g2_time_delay   : integer := 0;        g3_high         : integer := 1;        g3_low          : integer := 1;        g3_initial      : integer := 1;        g3_mode         : string  := "bypass";        g3_ph           : integer := 0;        g3_time_delay   : integer := 0;        e0_high         : integer := 1;        e0_low          : integer := 1;        e0_initial      : integer := 1;        e0_mode         : string  := "bypass";        e0_ph           : integer := 0;        e0_time_delay   : integer := 0;        e1_high         : integer := 1;        e1_low          : integer := 1;        e1_initial      : integer := 1;        e1_mode         : string  := "bypass";        e1_ph           : integer := 0;        e1_time_delay   : integer := 0;        e2_high         : integer := 1;        e2_low          : integer := 1;        e2_initial      : integer := 1;        e2_mode         : string  := "bypass";        e2_ph           : integer := 0;        e2_time_delay   : integer := 0;        e3_high         : integer := 1;        e3_low          : integer := 1;        e3_initial      : integer := 1;        e3_mode         : string  := "bypass";        e3_ph           : integer := 0;        e3_time_delay   : integer := 0;        m_ph            : integer := 0;        m_time_delay    : integer := 0;        n_time_delay    : integer := 0;        extclk0_counter : string  := "e0";        extclk1_counter : string  := "e1";        extclk2_counter : string  := "e2";        extclk3_counter : string  := "e3";        clk0_counter    : string  := "g0";        clk1_counter    : string  := "g1";        clk2_counter    : string  := "g2";        clk3_counter    : string  := "g3";        clk4_counter    : string  := "l0";        clk5_counter    : string  := "l1";        enable0_counter : string  := "l0";        enable1_counter : string  := "l0";        charge_pump_current: integer := 0;        loop_filter_r   : string  := "1.0";        loop_filter_c   : integer := 1;        pll_compensation_delay: integer := 0;        simulation_type : string  := "timing";        source_is_pll   : string  := "off";        clk0_phase_shift_num: integer := 0;        clk1_phase_shift_num: integer := 0;        clk2_phase_shift_num: integer := 0;        family_name     : string  := "Cyclone";        skip_vco        : string  := "off";        clk0_use_even_counter_mode: string  := "off";        clk1_use_even_counter_mode: string  := "off";        clk2_use_even_counter_mode: string  := "off";        clk3_use_even_counter_mode: string  := "off";        clk4_use_even_counter_mode: string  := "off";        clk5_use_even_counter_mode: string  := "off";        extclk0_use_even_counter_mode: string  := "off";        extclk1_use_even_counter_mode: string  := "off";        extclk2_use_even_counter_mode: string  := "off";        extclk3_use_even_counter_mode: string  := "off";        clk0_use_even_counter_value: string  := "off";        clk1_use_even_counter_value: string  := "off";        clk2_use_even_counter_value: string  := "off";        clk3_use_even_counter_value: string  := "off";        clk4_use_even_counter_value: string  := "off";        clk5_use_even_counter_value: string  := "off";        extclk0_use_even_counter_value: string  := "off";        extclk1_use_even_counter_value: string  := "off";        extclk2_use_even_counter_value: string  := "off";        extclk3_use_even_counter_value: string  := "off";        EGPP_SCAN_CHAIN : integer := 289;        GPP_SCAN_CHAIN  : integer := 193;        TRST            : integer := 5000;        TRSTCLK         : integer := 5000    );    port(        inclk           : in     vl_logic_vector(1 downto 0);        fbin            : in     vl_logic;        ena             : in     vl_logic;        clkswitch       : in     vl_logic;        areset          : in     vl_logic;        pfdena          : in     vl_logic;        clkena          : in     vl_logic_vector(5 downto 0);        extclkena       : in     vl_logic_vector(3 downto 0);        scanclk         : in     vl_logic;        scanaclr        : in     vl_logic;        scandata        : in     vl_logic;        clk             : out    vl_logic_vector(5 downto 0);        extclk          : out    vl_logic_vector(3 downto 0);        clkbad          : out    vl_logic_vector(1 downto 0);        activeclock     : out    vl_logic;        locked          : out    vl_logic;        clkloss         : out    vl_logic;        scandataout     : out    vl_logic;        comparator      : in     vl_logic;        enable0         : out    vl_logic;        enable1         : out    vl_logic    );end cyclone_pll;