OUTBIT   equ 08002h  ; 位控制口
OUTSEG   equ 08004h  ; 段控制口
IN       equ 08001h  ; 鍵盤讀入口

HasRcv equ   20h.0   ; 接收標志位
LEDBuf equ   40h     ; 顯示緩沖
RCVBuf equ   50H     ; 接收緩沖

        ORG     0000H
        LJMP    START

; 串行口中斷程序
        ORG     0023H
        JNB     TI,S0_R
        CLR     TI
        NOP
        SJMP    S0_RET
S0_R:                          ; 接收數據
        CLR     RI
        MOV     RCVBUF,SBUF    ; 保存數據
        SETB    HasRcv         ; 提示收到數據
        NOP
S0_RET:
        RETI

LEDMAP:              ; 八段管顯示碼
       db    3fh, 06h, 5bh, 4fh, 66h, 6dh, 7dh, 07h
       db    7fh, 6fh, 77h, 7ch, 39h, 5eh, 79h, 71h

Delay:               ; 延時子程序
       mov   r7, #0
DelayLoop:
       djnz  r7, DelayLoop
       djnz  r6, DelayLoop
       ret

DisplayLED:
       mov   r0, #LEDBuf
       mov   r1, #6          ; 共6個八段管
       mov   r2, #00100000b  ; 從左邊開始顯示
Loop:
       mov   dptr, #OUTBIT
       mov   a, #0
       movx  @dptr, a        ; 關所有八段管

       mov   a, @r0
       mov   dptr, #OUTSEG
       movx  @dptr,a
       mov   dptr, #OUTBIT
       mov   a, r2
       movx  @dptr, a        ; 顯示一位八段管

       mov   r6, #1
       call  Delay

       mov   a, r2           ; 顯示下一位
       rr    a
       mov   r2, a

       inc   r0

       djnz  r1, Loop

       ret

TestKey:
       mov   dptr, #OUTBIT
       mov   a, #0
       movx  @dptr, a        ; 輸出線置為0
       mov   dptr, #IN
       movx  a, @dptr        ; 讀入鍵狀態
       cpl   a
       anl   a, #0fh         ; 高四位不用

       ret

KeyTable:                    ; 鍵碼定義
       db    16h, 15h, 14h, 0ffh
       db    13h, 12h, 11h, 10h
       db    0dh, 0ch, 0bh, 0ah
       db    0eh, 03h, 06h, 09h
       db    0fh, 02h, 05h, 08h
       db    00h, 01h, 04h, 07h

GetKey:
       mov   dptr, #OUTBIT
       mov   P2, dph
       mov   r0, #Low(IN)
       mov   r1, #00100000b
       mov   r2, #6
KLoop:
       mov   a, r1           ; 找出鍵所在列
       cpl   a
       movx  @dptr, a
       cpl   a
       rr    a
       mov   r1, a           ; 下一列

       movx  a, @r0
       cpl   a
       anl   a, #0fh
       jnz   Goon1           ; 該列有鍵入

       djnz  r2, KLoop

       mov   r2, #0ffh       ; 沒有鍵按下, 返回 0ffh
       sjmp  Exit
Goon1:
       mov   r1, a           ; 鍵值 = 列 X 4 + 行

       mov   a, r2
       dec   a
       rl    a
       rl    a
       mov   r2, a           ; r2 = (r2-1)*4

       mov   a, r1           ; r1中為讀入的行值
       mov   r1, #4
LoopC:
       rrc   a               ; 移位找出所在行
       jc    Exit
       inc   r2              ; r2 = r2+ 行值
       djnz  r1, LoopC
Exit:
       mov   a, r2           ; 取出鍵碼
       mov   dptr, #KeyTable
       movc  a, @a+dptr
       mov   r2, a

WaitRelease:
       mov   dptr, #OUTBIT  ; 等鍵釋放
       clr   a
       movx  @dptr, a

       mov   r6, #10
       call  Delay
       call  TestKey
       jnz   WaitRelease

       mov   a, r2
       ret

START:
       MOV   SP,  #60H
       MOV   IE,  #0     ; DISABLE ALL INTERRUPT
       MOV   TMOD,#020H  ; 定時器1工作于方式2 (8位重裝)
       MOV   TH1, #0F3H  ; 波特率