esac;$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh$(top_srcdir)/configure:  $(am__configure_deps)	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh$(ACLOCAL_M4):  $(am__aclocal_m4_deps)	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refreshmostlyclean-libtool:	-rm -f *.loclean-libtool:	-rm -rf .libs _libs# This directory's subdirectories are mostly independent; you can cd# into them and run `make' without going through this Makefile.# To change the values of `make' variables: instead of editing Makefiles,# (1) if the variable is set in `config.status', edit `config.status'#     (which will cause the Makefiles to be regenerated when you run `make');# (2) otherwise, pass the desired values on the `make' command line.$(RECURSIVE_TARGETS):	@failcom='exit 1'; \	for f in x $$MAKEFLAGS; do \	  case $$f in \	    *=* | --[!k]*);; \	    *k*) failcom='fail=yes';; \	  esac; \	done; \	dot_seen=no; \	target=`echo $@ | sed s/-recursive//`; \	list='$(SUBDIRS)'; for subdir in $$list; do \	  echo "Making $$target in $$subdir"; \	  if test "$$subdir" = "."; then \	    dot_seen=yes; \	    local_target="$$target-am"; \	  else \	    local_target="$$target"; \	  fi; \	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \	  || eval $$failcom; \	done; \	if test "$$dot_seen" = "no"; then \	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \	fi; test -z "$$fail"$(RECURSIVE_CLEAN_TARGETS):	@failcom='exit 1'; \	for f in x $$MAKEFLAGS; do \	  case $$f in \	    *=* | --[!k]*);; \	    *k*) failcom='fail=yes';; \	  esac; \	done; \	dot_seen=no; \	case "$@" in \	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \	  *) list='$(SUBDIRS)' ;; \	esac; \	rev=''; for subdir in $$list; do \	  if test "$$subdir" = "."; then :; else \	    rev="$$subdir $$rev"; \	  fi; \	done; \	rev="$$rev ."; \	target=`echo $@ | sed s/-recursive//`; \	for subdir in $$rev; do \	  echo "Making $$target in $$subdir"; \	  if test "$$subdir" = "."; then \	    local_target="$$target-am"; \	  else \	    local_target="$$target"; \	  fi; \	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \	  || eval $$failcom; \	done && test -z "$$fail"tags-recursive:	list='$(SUBDIRS)'; for subdir in $$list; do \	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \	donectags-recursive:	list='$(SUBDIRS)'; for subdir in $$list; do \	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \	doneID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \	unique=`for i in $$list; do \	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \	  done | \	  $(AWK) '    { files[$$0] = 1; } \	       END { for (i in files) print i; }'`; \	mkid -fID $$uniquetags: TAGSTAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \		$(TAGS_FILES) $(LISP)	tags=; \	here=`pwd`; \	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \	  include_option=--etags-include; \	  empty_fix=.; \	else \	  include_option=--include; \	  empty_fix=; \	fi; \	list='$(SUBDIRS)'; for subdir in $$list; do \	  if test "$$subdir" = .; then :; else \	    test ! -f $$subdir/TAGS || \	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \	  fi; \	done; \	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \	unique=`for i in $$list; do \	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \	  done | \	  $(AWK) '    { files[$$0] = 1; } \	       END { for (i in files) print i; }'`; \	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \	  test -n "$$unique" || unique=$$empty_fix; \	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \	    $$tags $$unique; \	fictags: CTAGSCTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \		$(TAGS_FILES) $(LISP)	tags=; \	here=`pwd`; \	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \	unique=`for i in $$list; do \	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \	  done | \	  $(AWK) '    { files[$$0] = 1; } \	       END { for (i in files) print i; }'`; \	test -z "$(CTAGS_ARGS)$$tags$$unique" \	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \	     $$tags $$uniqueGTAGS:	here=`$(am__cd) $(top_builddir) && pwd` \	  && cd $(top_srcdir) \	  && gtags -i $(GTAGS_ARGS) $$heredistclean-tags:	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags#>- distdir: $(DISTFILES)#>+ 1distdir: distdir-nls  $(DISTFILES)	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \	list='$(DISTFILES)'; \	  dist_files=`for file in $$list; do echo $$file; done | \	  sed -e "s|^$$srcdirstrip/||;t" \	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \	case $$dist_files in \	  */*) $(MKDIR_P) `echo "$$dist_files" | \			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \			   sort -u` ;; \	esac; \	for file in $$dist_files; do \	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \	  if test -d $$d/$$file; then \	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \	    fi; \	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \	  else \	    test -f $(distdir)/$$file \	    || cp -p $$d/$$file $(distdir)/$$file \	    || exit 1; \	  fi; \	done	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \	  if test "$$subdir" = .; then :; else \	    test -d "$(distdir)/$$subdir" \	    || $(MKDIR_P) "$(distdir)/$$subdir" \	    || exit 1; \	    distdir=`$(am__cd) $(distdir) && pwd`; \	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \	    (cd $$subdir && \	      $(MAKE) $(AM_MAKEFLAGS) \	        top_distdir="$$top_distdir" \	        distdir="$$distdir/$$subdir" \		am__remove_distdir=: \		am__skip_length_check=: \	        distdir) \	      || exit 1; \	  fi; \	donecheck-am: all-amcheck: check-recursiveall-am: Makefileinstalldirs: installdirs-recursiveinstalldirs-am:install: install-recursiveinstall-exec: install-exec-recursiveinstall-data: install-data-recursive#>- uninstall: uninstall-recursive#>+ 1uninstall: uninstall-nls  uninstall-recursiveinstall-am: all-am	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-aminstallcheck: installcheck-recursiveinstall-strip:	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \	  `test -z '$(STRIP)' || \	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` installmostlyclean-generic:clean-generic:distclean-generic:	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)maintainer-clean-generic:	@echo "This command is intended for maintainers to use"	@echo "it deletes files that may require special tools to rebuild."#>- clean: clean-recursive#>+ 1clean: kde-rpo-clean  clean-recursive#>- clean-am: clean-generic clean-libtool mostlyclean-am#>+ 1clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-amdistclean: distclean-recursive	-rm -f Makefiledistclean-am: clean-am distclean-generic distclean-tagsdvi: dvi-recursivedvi-am:html: html-recursiveinfo: info-recursiveinfo-am:#>- install-data-am:#>+ 1install-data-am: install-nls install-dvi: install-dvi-recursiveinstall-exec-am:install-html: install-html-recursiveinstall-info: install-info-recursiveinstall-man:install-pdf: install-pdf-recursiveinstall-ps: install-ps-recursiveinstallcheck-am:#>- maintainer-clean: maintainer-clean-recursive#>+ 1maintainer-clean: clean-nls  maintainer-clean-recursive	-rm -f Makefilemaintainer-clean-am: distclean-am maintainer-clean-genericmostlyclean: mostlyclean-recursivemostlyclean-am: mostlyclean-generic mostlyclean-libtoolpdf: pdf-recursivepdf-am:ps: ps-recursiveps-am:uninstall-am:.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \	install-strip.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \	all all-am check check-am clean clean-generic clean-libtool \	ctags ctags-recursive distclean distclean-generic \	distclean-libtool distclean-tags distdir dvi dvi-am html \	html-am info info-am install install-am install-data \	install-data-am install-dvi install-dvi-am install-exec \	install-exec-am install-html install-html-am install-info \	install-info-am install-man install-pdf install-pdf-am \	install-ps install-ps-am install-strip installcheck \	installcheck-am installdirs installdirs-am maintainer-clean \	maintainer-clean-generic mostlyclean mostlyclean-generic \	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \	uninstall uninstall-am# Tell versions [3.59,3.63) of GNU make to not export all variables.# Otherwise a system limit (for SysV at least) may be exceeded..NOEXPORT:#>+ 2KDE_DIST=Makefile.in amarok.po Makefile.am #>+ 4amarok.gmo: amarok.po	rm -f amarok.gmo; $(GMSGFMT) -o amarok.gmo $(srcdir)/amarok.po	test ! -f amarok.gmo || touch amarok.gmo#>+ 3clean-nls:	-rm -f  amarok.gmo#>+ 10install-nls:	$(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES	@for base in amarok ; do \	  echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\	  if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\	  elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\	  fi ;\	done#>+ 3uninstall-nls:	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/amarok.mo#>+ 2all-nls: $(GMOFILES)#>+ 8distdir-nls:$(GMOFILES)	for file in $(POFILES); do \	  cp $(srcdir)/$$file $(distdir); \	done	for file in $(GMOFILES); do \	  cp $(srcdir)/$$file $(distdir); \	done#>+ 2docs-am:#>+ 15force-reedit:		@for dep in $?; do \	  case '$(am__configure_deps)' in \	    *$$dep*) \	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \		&& exit 0; \	      exit 1;; \	  esac; \	done; \	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  po/eu/Makefile'; \	cd $(top_srcdir) && \	  $(AUTOMAKE) --gnu  po/eu/Makefile	cd $(top_srcdir) && perl admin/am_edit po/eu/Makefile.in#>+ 21clean-bcheck: 	rm -f *.bchecktest.cc *.bchecktest.cc.class a.outbcheck: bcheck-recursivebcheck-am:	@for i in ; do \	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \	        echo "$$i"; \	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \	            rm -f $$i.bchecktest.cc; exit 1; \	        fi ; \	        echo "" >> $$i.bchecktest.cc.class; \	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \	        rm -f a.out; \	    fi ; \	done#>+ 3final:	$(MAKE) all-am#>+ 3final-install:	$(MAKE) install-am#>+ 3no-final:	$(MAKE) all-am#>+ 3no-final-install:	$(MAKE) install-am#>+ 3kde-rpo-clean:	-rm -f *.rpo#>+ 3nmcheck: nmcheck-am: nmcheck