/* * Device Tree Souce for Buffalo KuroboxHD * * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use * the default configuration linkstation_defconfig. * * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> * * This file is licensed under * the terms of the GNU General Public License version 2.  This program * is licensed "as is" without any warranty of any kind, whether express * or implied.XXXX add flash parts, rtc, ?? *// {	model = "KuroboxHD";	compatible = "linkstation";	#address-cells = <1>;	#size-cells = <1>;	cpus {		#address-cells = <1>;		#size-cells = <0>;		PowerPC,603e { /* Really 8241 */			device_type = "cpu";			reg = <0>;			clock-frequency = <bebc200>;	/* Fixed by bootloader */			timebase-frequency = <1743000>; /* Fixed by bootloader */			bus-frequency = <0>;		/* Fixed by bootloader */			/* Following required by dtc but not used */			i-cache-size = <4000>;			d-cache-size = <4000>;		};	};	memory {		device_type = "memory";		reg = <00000000 04000000>;	};	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */		#address-cells = <1>;		#size-cells = <1>;		device_type = "soc";		compatible = "mpc10x";		store-gathering = <0>; /* 0 == off, !0 == on */		reg = <80000000 00100000>;		ranges = <80000000 80000000 70000000	/* pci mem space */			  fc000000 fc000000 00100000	/* EUMB */			  fe000000 fe000000 00c00000	/* pci i/o space */			  fec00000 fec00000 00300000	/* pci cfg regs */			  fef00000 fef00000 00100000>;	/* pci iack */		i2c@80003000 {			#address-cells = <1>;			#size-cells = <0>;			device_type = "i2c";			compatible = "fsl-i2c";			reg = <80003000 1000>;			interrupts = <5 2>;			interrupt-parent = <&mpic>;			rtc@32 {				device_type = "rtc";				compatible = "ricoh,rs5c372a";				reg = <32>;			};		};		serial@80004500 {			device_type = "serial";			compatible = "ns16550";			reg = <80004500 8>;			clock-frequency = <5d08d88>;			current-speed = <2580>;			interrupts = <9 0>;			interrupt-parent = <&mpic>;		};		serial@80004600 {			device_type = "serial";			compatible = "ns16550";			reg = <80004600 8>;			clock-frequency = <5d08d88>;			current-speed = <e100>;			interrupts = <a 0>;			interrupt-parent = <&mpic>;		};		mpic: interrupt-controller@80040000 {			#interrupt-cells = <2>;			#address-cells = <0>;			device_type = "open-pic";			compatible = "chrp,open-pic";			interrupt-controller;			reg = <80040000 40000>;		};		pci@fec00000 {			#address-cells = <3>;			#size-cells = <2>;			#interrupt-cells = <1>;			device_type = "pci";			compatible = "mpc10x-pci";			reg = <fec00000 400000>;			ranges = <01000000 0        0 fe000000 0 00c00000				  02000000 0 80000000 80000000 0 70000000>;			bus-range = <0 ff>;			clock-frequency = <7f28155>;			interrupt-parent = <&mpic>;			interrupt-map-mask = <f800 0 0 7>;			interrupt-map = <				/* IDSEL 11 - IRQ0 ETH */				5800 0 0 1 &mpic 0 1				5800 0 0 2 &mpic 1 1				5800 0 0 3 &mpic 2 1				5800 0 0 4 &mpic 3 1				/* IDSEL 12 - IRQ1 IDE0 */				6000 0 0 1 &mpic 1 1				6000 0 0 2 &mpic 2 1				6000 0 0 3 &mpic 3 1				6000 0 0 4 &mpic 0 1				/* IDSEL 14 - IRQ3 USB2.0 */				7000 0 0 1 &mpic 3 1				7000 0 0 2 &mpic 3 1				7000 0 0 3 &mpic 3 1				7000 0 0 4 &mpic 3 1			>;		};	};};