#include <reg51.h>
/*unsigned char table1[]={0x03,0x07,0x0f,0x1f,0x1f,0x1f,0x1f,0x1f, 
                           0x18,0x1E,0x1f,0x1f,0x1f,0x1f,0x1f,0x1f, 
                           0x07,0x1f,0x1f,0x1f,0x1f,0x1f,0x1f,0x1f, 
                           0x10,0x18,0x1c,0x1E,0x1E,0x1E,0x1E,0x1E, 
                           0x0f,0x07,0x03,0x01,0x00,0x00,0x00,0x00, 
                           0x1f,0x1f,0x1f,0x1f,0x1f,0x0f,0x07,0x01, 
                           0x1f,0x1f,0x1f,0x1f,0x1f,0x1c,0x18,0x00, 
                           0x1c,0x18,0x10,0x00,0x00,0x00,0x00,0x00};//心圖案 */
unsigned char table1[]={0x08,0x0F,0x12,0x0F,0x0A,0x1F,0x02,0x02,     	//"年"代碼=00H 
           					    0x0F,0x09,0x0F,0x09,0x0F,0x09,0x11,0x00,     	//"月"代碼=01H
           						0x1F,0x11,0x11,0x1F,0x11,0x11,0x1F,0x00,     	//"日"代碼=02H
           						0x11,0x0A,0x04,0x1F,0x04,0x1F,0x04,0x00,     	//"$"代碼=03H
           						0x0E,0x00,0x1F,0x0A,0x0A,0x0A,0x13,0x00,     	//"元"代碼=04H
           						0x18,0x18,0x07,0x08,0x08,0x08,0x07,0x00,    	//"℃"代碼=05H
           			 			0x04,0x0A,0x15,0x04,0x04,0x04,0x04,0x00,     	//"↑"代碼=06H
           			 			0x17,0x15,0x15,0x15,0x15,0x15,0x17,0x00};   	//字符℃ 
unsigned char table[]={0x10,0x06,0x09,0x08,0x08,0x09,0x06,0x00};

#define     CLEARSCREEN     LCD_write_command(0x01)

/**************定義接口************************/

#define     LCDIO      P1 
sbit LCD1602_RS=P3^4;     
sbit LCD1602_RW=P3^5;    
sbit LCD1602_EN=P3^6;   

/**************定義函數************************/ 
void LCD_write_command(unsigned char command);//寫入指令函數 
void LCD_write_dat(unsigned char dat);//寫入數據函數 
void LCD_set_xy( unsigned char x, unsigned char y );//設置顯示位置函數 
void LCD_dsp_char( unsigned x,unsigned char y,unsigned char dat);//顯示一個字符函數 
void LCD_dsp_string(unsigned char X,unsigned char Y,unsigned char *s);//顯示字符串函數 
void LCD_init(void);//初始化函數 
void delay_nms(unsigned int n);//延時函數 
/********************************************/

/************初始化函數****************/ 
void LCD_init(void) 
{  
CLEARSCREEN;//clear screen  
LCD_write_command(0x38);//set 8 bit data transmission mode  
LCD_write_command(0x0c);//open display (enable lcd display) 
LCD_write_command(0x80);//set lcd first display address  
CLEARSCREEN;//clear screen 
} 
/****************************************************/

/**************寫指令函數********************************/   
void LCD_write_command(unsigned char command) 
{ 
      LCDIO=command; 
      LCD1602_RS=0;    
      LCD1602_RW=0; 
      LCD1602_EN=0; 
      LCD1602_EN=1; 
      delay_nms(10); 
} 
/***************************************************/ 
/****************寫數據函數************************/ 
void LCD_write_dat(unsigned char dat) 
{ 
LCDIO=dat; 
LCD1602_RS=1; 
LCD1602_RW=0; 
LCD1602_EN=0; 
delay_nms(1); 
LCD1602_EN=1; 
} 
/****************************************************/

/***************設置顯示位置**************************/ 
void LCD_set_xy( unsigned char x, unsigned char y ) 
{ 
unsigned char address; 
if (y == 1)  
     address = 0x80 + x; 
else  
        address =0xc0+ x; 
LCD_write_command(address);  
} 
/***************************************************/

/****************顯示一個字符**********************/ 
void LCD_dsp_char( unsigned char x,unsigned char y,unsigned char dat) 
{ 
LCD_set_xy( x, y );  
LCD_write_dat(dat); 
} 
/**********************************************/

/***************顯示字符串函數***************/ 
void LCD_dsp_string(unsigned char X,unsigned char Y,unsigned char *s) 
{ 
       LCD_set_xy( X, Y );  
       while (*s)   
       { 
         LCD_write_dat(*s);    
         s ++; 
       } 
} 
/***********************************************/

/********** 延時**********************/ 
void delay_nms(unsigned int n)       
{ 
       unsigned int i=0,j=0; 
       for (i=n;i>0;i--) 
       for (j=0;j<10;j++);   
} 
/**************************************/

/***********主函數**************/ 
void main(void) 
{ 
	unsigned char i,j,k,tmp; 
	LCD_init(); 
	delay_nms(100); 
	tmp=0x40;//設置CGRAM地址的格式字   CGRAM地址格式很復雜  01 000 000  01是固定的  左起第一個000是代碼的大小，最后的000是個偏移量（存儲每個代碼數據的偏移量）
	k=0; 
	for(j=0;j<8;j++) { 
        for(i=0;i<8;i++) {  
           LCD_write_command(tmp+i); // 設置自定義字符的 CGRAM 地址   
           delay_nms(2); 
           LCD_write_dat(table1[k]); // 向CGRAM寫入自定義字符表的數據 
           k++; 
           delay_nms(2); 
         } 
        tmp=tmp+8; //寫完00H的8個數據后，轉入寫01H的8個數據  
      } 
     LCD_dsp_string(1,1,"LCD TEST        ");//
     LCD_dsp_string(1,2,"SUCCESSFUL      ");//
     for (i=0;i<4;i++) 
       { 
         LCD_dsp_char( 12+i,1,i);//在第一行第12列位置顯示心圖案的上半部 
         delay_nms(1); 
       } 
     for (i=4;i<8;i++) 
       { 
         LCD_dsp_char( 12+i-4,2,i);//在第二行第12列位置顯示心圖案的下半部 
         delay_nms(1); 
       } 

	
	for(i=0;i<30;i++){
		delay_nms(1000);
	}
	CLEARSCREEN;
	LCD_dsp_string(0,1,"XIONGJIALE");
	LCD_dsp_string(5,2,"ICEXIONG");
    while (1); 
} 
/********************************************************************/