iwpriv=================This is detailed explanation of each parameters for iwpriv.Before reading this document, make sure you already read README.-------------------------------------------------------------------------------------------------------USAGE_1:	iwpriv wlan0 set [parameters]=[val]NOTE:	Execute one iwpriv/set command simultaneously.DESCRIPTION[parameters]        	[val] /{range}-----------------   	-------------------------------------------------CountryRegion       	{0~7}						::Set country region						0: 1 ~ 11 ch						1: 1 ~ 13 ch						2: 10, 11 ch						3: 10 ~ 13 ch						4: 14 ch						5: 1 ~ 14 ch						6: 3 ~ 9 ch						7: 5 ~ 13 chCountryRegionABand		{0~10}						::Set country region for A band						0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch						1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch						2: 36, 40, 44, 48, 52, 56, 60, 64 ch						3: 52, 56, 60, 64, 149, 153, 157, 161 ch						4: 149, 153, 157, 161, 165 ch						5: 149, 153, 157, 161 ch						6: 36, 40, 44, 48 ch						7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch						8: 52, 56, 60, 64 ch						9: 34, 38, 42, 46 ch						10: 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 chSSID                	{0~z, 1~32 ascii characters}                    	::Set AP SSIDWirelessMode        	{0~4}						::Set Wireless Mode                    	0:11b/g mixed,                    	1:11B only,                    	2:11A only                    	3:11a/b/g mixed,                    	4:11G onlyTxRate              	{0~12}						::Set TxRate of Infrastructure mode                    	0:Auto, 	1:1Mbps,                    	2:2Mbps, 	3:5.5Mbps,                    	4:11Mbps, 	5:6Mbps,                    	6:9Mbps, 	7:12Mbps,                    	8:18Mbps, 	9:24Mbps,                    	10:36Mbps, 	11:48Mbps,                    	12:54MbpsChannel             	depends on CountryRegion or CountryRegionABand                        ::Set ChannelBGProtection        	{0~2}						::Set 11B/11G Protection                   		0:Auto,                   		1:Always on,                   		2:Always offTxPreamble          	{0~2}						::Set TxPreamble                    	0:Preamble Long,                    	1:Preamble Short,                    	2:AutoRTSThreshold        	{1~2347}                    	::Set RTS ThresholdFragThreshold       	{256~2346}						::Set Fragment ThresholdTxBurst             	{0,1}						::Set TxBurst Enable or Disable                  		0:Disable,                  		1:EnableNetworkType	    		{Infra,Adhoc}    					::Set Network typeAdhocOfdm				{0~3}                        ::Set Adhoc Wireless Mode    				    0: WIFI mode(11b rates only),        				1: b/g mixed,        				2: 11g only,        				3: 11a onlyAuthMode            	{OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE}                        ::Set Authentication ModeEncrypType          	{NONE,WEP,TKIP,AES}						::Set Encryption TypeDefaultKeyID        	{1~4}						::Set Default Key IDKey1                 	{5 ascii characters or 10 hex number or                     	13 ascii characters or 26 hex numbers}                     	::Set Key1 StringKey2                 	{5 ascii characters or 10 hex number or                     	13 ascii characters or 26 hex numbers}                      	::Set Key2 StringKey3                 	{5 ascii characters or 10 hex number or                     	13 ascii characters or 26 hex numbers}						::Set Key3 StringKey4                 	{5 ascii characters or 10 hex number or                     	13 ascii characters or 26 hex numbers}                        ::Set Key4 StringWPAPSK              	{8~63 ascii or 64 hex characters}						::WPA Pre-Shared KeyPSMode					{CAM, MAX_PSP, FAST_PSP}                        ::Set Power Saving ModeIEEE80211H              {0,1}                        ::Set IEEE80211H  Enable or Disable                        0:	Disable                        1:	Enable spectrum management                        (This field can be enable only in A band)-------------------------------------------------------------------------------------------------------USAGE_2:	iwpriv wlan0 [parameters] [val]DESCRIPTION[parameters]        	[val] range                             explaination-----------------   	-----------------------              ------------------------------------------auth                    {1~5}   1:OPEN                          Authentication Mode                                2:SHARED                                3:WPAPSK                                4:WPA2PSK                                5:WPANONEenc                     {1~4}   1:NONE                          Encryption Type                                2:WEP                                3:TKIP                                4:AESwpapsk                  {8~64 chars}                            WPAPSK/WPA2PSK Passwordpsm                     {0~2}   0:constantly awake mode (CAM)   Power Saving Mode                                1:MAX_PSP                                2:FAST_PSP-------------------------------------------------------------------------------------------------------Examples=================-------------------------------------------------------------------------------------------------------a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)	1. iwpriv wlan0 set NetworkType=Infra	2. iwpriv wlan0 set AuthMode=OPEN	3. iwpriv wlan0 set EncrypType=NONE	4. iwpriv wlan0 set SSID="AP's SSID"b> Config STA to link with AP and OPEN/WEP(Authentication/Encryption).    Default Key ID = 3	1. iwconfig wlan0 key [3]	2. iwconfig wlan0 key s:abcde	3. iwconfig wlan0 essid "AP's SSID"c> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption).	1. iwpriv wlan0 set NetworkType=Infra	2. iwpriv wlan0 set AuthMode=SHARED	3. iwpriv wlan0 set EncrypType=WEP	4. iwpriv wlan0 set Key1="AP's wep key"	5. iwpriv wlan0 set DefaultKeyID=1	6. iwpriv wlan0 set SSID="AP's SSID"d> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)	1. iwpriv wlan0 set NetworkType=Infra	2. iwpriv wlan0 set AuthMode=WPAPSK	3. iwpriv wlan0 set EncrypType=TKIP	4. iwpriv wlan0 set SSID="AP's SSID"	5. iwpriv wlan0 set WPAPSK="12345678"	6. iwpriv wlan0 set SSID="AP's SSID"    p.s Step 4 is part of generating wpapsk password and is necessary.e> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)    1. iwconfig wlan0 mode managed	2. iwpriv wlan0 auth 3	3. iwpriv wlan0 enc  4	4. iwconfig wlan0 essid "AP's SSID"	5. iwpriv wlan0 wpapsk 12345678	6. iwconfig wlan0 essid "AP's SSID"f> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)	1. iwpriv wlan0 set NetworkType=Infra	2. iwpriv wlan0 set AuthMode=WPA2PSK	3. iwpriv wlan0 set EncrypType=TKIP	4. iwpriv wlan0 set SSID="AP's SSID"	5. iwpriv wlan0 set WPAPSK="12345678"	6. iwpriv wlan0 set SSID="AP's SSID"g> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)	1. iwpriv wlan0 set NetworkType=Adhoc	2. iwpriv wlan0 set AuthMode=OPEN	3. iwpriv wlan0 set EncrypType=NONE	4. iwpriv wlan0 set SSID="Adhoc's SSID"h>  Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)    1. iwpriv wlan0 set NetworkType=Adhoc	2. iwpriv wlan0 set AuthMode=WPANONE	3. iwpriv wlan0 set EncrypType=TKIP	4. iwpriv wlan0 set SSID="AP's SSID"	5. iwpriv wlan0 set WPAPSK=12345678	6. iwpriv wlan0 set SSID="AP's SSID"i> Get site survey    iwpriv wlan0 get_site_surveyj> Get Statistics    iwpriv wlan0 stat						; read statistic counter    iwpriv wlan0 set ResetCounter=0		; reset statistic counterk> Link with any AP without security        ; set ANY SSID (ssidLen=0)   usage: iwconfig ra0 essid ""   or   usage: iwpriv ra0 set SSID=""===================================================================iwlist=================This is detailed explanation of each parameters for iwlist.-------------------------------------------------------------------------------------------------------iwlist wlan0 scanning		; list the results after scanning(manual rescan)=======================================================================================================iwconfig=================The following are our support in standard configuration - iwconfig-------------------------------------------------------------------------------------------------------iwconfig wlan0 essid {NN|on|off}		        ; set ssidiwconfig wlan0 mode {managed|ad-hoc|...}       ; set wireless modeiwconfig wlan0 freq N.NNNN[k|M|G]]		        ; set frequencyiwconfig wlan0 channel N					    ; set channeliwconfig wlan0 ap {N|off|auto}			        ; set ap addressiwconfig wlan0 nick N						    ; set nicknameiwconfig wlan0 rate {N|auto|fixed}     	    ; set rateiwconfig wlan0 rts {N|auto|fixed|off}		    ; set rts thresholdiwconfig wlan0 frag {N|auto|fixed|off}	        ; set fragment thresholdiwconfig wlan0 enc {NNNN-NNNN|off}		        ; set encryption typeiwconfig wlan0 power {period N|timeout N}	    ; set power management modesiwconfig wlan0 key {[id]|s:pswd|pswd}          ; set wep key*** Please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'. ***