?? wiredelay.lis
字號:
Init: read install configuration file: D:\synopsys\Hspice2005.03\meta.cfg
****** HSPICE W-2005.03 (20050128) 12:35:41 11/23/2008 pcnt
Copyright (C) 2005 Synopsys, Inc. All Rights Reserved.
Unpublished-rights reserved under US copyright laws.
This program is protected by law and is subject to the
terms and conditions of the license agreement found in:
D:\synopsys\Hspice2005.03\license.txt
Use of this program is your acceptance to be bound by this
license agreement. HSPICE is the trademark of Synopsys, Inc.
Input File: f:\vlsi\wire\wiredelay.sp
lic:
lic: FLEXlm: v8.4b
lic: USER: TTI HOSTNAME: lenovo-b9b16e97
lic: HOSTID: 001b389cc95d PID: 244
lic: Using FLEXlm license file:
lic: c:\flexlm\license.dat
lic: Checkout hspicewin; Encryption code: DCFE951F005EC01439B7
lic: Notice: NOT TO BE SOLD
lic: License/Maintenance for hspicewin will expire on 31-dec-2050/2005.3
lic: NODE LOCKED DEMO license on host 001b389cc95d
lic:
Init: read install configuration file: D:\synopsys\Hspice2005.03\meta.cfg
Init: hspice initialization file: D:\synopsys\Hspice2005.03\hspice.ini
* hspice.ini
*
* use ascii only for initial pc hspice release
*
.option post = 2
.opt list acct limpts=1000
.global vd
vdd vd 0 5
.subckt inverter1 in out
mp out in vd vd mod2 w=96u l=0.8u
mn out in 0 0 mod1 w=32u l=0.8u
.ends inverter1
.subckt inverter2 in out
mp out in vd vd mod2 w=96u l=0.8u
mn out in 0 0 mod1 w=32u l=0.8u
.ends inverter2
.subckt buffer in out
xint1 in 1 inverter1
xint2 1 out inverter2
.ends buffer
.model mod1 nmos vto=1.0 kp=4.5e-5 lambda=0 gamma=0.4
+tox=1.0e-7 nsub=4.0e+15 ld=0.06u cj=2.0e-4 mj=0.5
+cjsw=2.0e-10 mjsw=0.4 cgso=1e-10 cgdo=1e-10 cgbo=2e-9
.model mod2 pmos vto=-1.2 kp=2.5e-5 lambda=0 gamma=0.4
+tox=1.0e-7 nsub=4.0e+15 ld=0.06u cj=2.0e-4 mj=0.5
+cjsw=2.0e-10 mjsw=0.4 cgso=1e-10 cgdo=1e-10 cgbo=2e-9
xbuffer1 1 2 buffer
r 2 12 700
c1 3 0 155f
c2 12 0 155f
vx 1 0 pulse( 0 5 0 0 0 10ns 20ns )
.tran 0.01ns 100ns
.meas tran delay1 trig v(1) val=2.5 rise=1
+ targ v(12) val=2.5 rise=1
.meas tran delay2 trig v(1) val=2.5 rise=2
+ targ v(12) val=2.5 rise=2
.probe
**warning** unknown analysis mode: vd .. line ignored
.end
scientific notation:
a=10**-18 f=10**-15 p=10**-12 n=10**-9 u=10**-6
m=10**-3 k=10**3 x=10**6 g=10**9
1 ****** HSPICE W-2005.03 (20050128) 12:35:41 11/23/2008 pcnt
******
wire delay model
****** circuit name directory
******
circuit number to circuit name directory
number circuitname definition multiplier
0 main circuit
1 xbuffer1. buffer 1.00
2 xbuffer1.xint1. inverter1 1.00
3 xbuffer1.xint2. inverter2 1.00
circuit parameter definitions
parameter = value
0:delay1 = 0.
0:delay2 = 0.
constants - tnom kt vt gapsi ni
298.1500 4.116e-21 25.6918m 1.1156 1.256e+16
1 ****** HSPICE W-2005.03 (20050128) 12:35:41 11/23/2008 pcnt
******
wire delay model
****** mos model parameters tnom= 25.000 temp= 25.000
******
***************************************************************************
*** common model parameters model name: 0:mod1 model type:nmos ***
***************************************************************************
names values units names values units names values units
----- ------ ----- ----- ------ ----- ----- ------ -----
1*** geometry parameters ***
ld= 60.00n meters lmlt= 1.00 wd= 0. meters
wmlt= 1.00 xl= 0. meters xw= 0. meters
lref= 0. meters wref= 0. meters lref= 0. meters
wref= 0. meters xlref= 0. meters xwref= 0. meters
lmin= 0. meters wmin= 0. meters lmax= 0. meters
wmax= 0. meters
2*** threshold voltage parameters ***
vto= 1.00 volts nss= 0. 1/cm**2 tpg= 1.00
phi= 651.07m volts gamma= 400.00m v**0.5 bulk= gnd
ngate= 0. cm**3 nsub= 4.0e+15 1/cm**3 delvto= 0. volts
3*** gate overlap capacitance parameters ***
cgbo= 2.00n f/meter cgdo= 100.00p f/meter cgso= 100.00p f/meter
meto= 0. meters
4*** gate capacitance parameters ***
capop= 2.00 cf1= 0. volts cf2= 100.00m volts
cf3= 1.00 volts cf4= 50.00 cf5= 666.67m
cf6= 500.00 xqc= 500.00m tox= 100.00n meters
cox= 345.31u f/m**2
5*** diffusion parasitic parameters ***
acm= 0. is= 10.00f amps js= 0. a/m**2
jsw= 0. amp/m nds= 1.00 cbd= 0. farad
cbs= 0. farad cj= 200.00u f/m**2 cjsw= 200.00p f/m
cjgate= 200.00p f/m mj= 500.00m mjsw= 400.00m
pb= 800.00m volts php= 800.00m volts tt= 0. secs
hdif= 0. meters ldif= 0. meters rd= 0. ohms
rs= 0. ohms rsh= 0. ohms/sq fc= 0.
alpha= 0. vcr= 0. volts iirat= 0.
rdc= 0. ohms rsc= 0. ohms n= 1.00
vnds= -1.00 volts
6*** temperature effect parameters ***
tlev= 0. tlevc= 0. eg= 1.11 ev
gap1= 702.00u ev/deg gap2= 1.11k deg xti= 0.
bex= -1.50 tcv= 0. v/deg k trd= 0. /deg
trs= 0. /deg cta= 0. /deg ctp= 0. /deg
7*** noise parameters ***
kf= 0. af= 1.00 nlev= 2.00
gdsnoi= 1.00
*** level 1 model parameters ***
lambda= 0. /v kp= 45.00u a/v**2
***************************************************************************
*** common model parameters model name: 0:mod2 model type:pmos ***
***************************************************************************
names values units names values units names values units
----- ------ ----- ----- ------ ----- ----- ------ -----
1*** geometry parameters ***
ld= 60.00n meters lmlt= 1.00 wd= 0. meters
wmlt= 1.00 xl= 0. meters xw= 0. meters
lref= 0. meters wref= 0. meters lref= 0. meters
wref= 0. meters xlref= 0. meters xwref= 0. meters
lmin= 0. meters wmin= 0. meters lmax= 0. meters
wmax= 0. meters
2*** threshold voltage parameters ***
vto= -1.20 volts nss= 0. 1/cm**2 tpg= 1.00
phi= 651.07m volts gamma= 400.00m v**0.5 bulk= gnd
ngate= 0. cm**3 nsub= 4.0e+15 1/cm**3 delvto= 0. volts
3*** gate overlap capacitance parameters ***
cgbo= 2.00n f/meter cgdo= 100.00p f/meter cgso= 100.00p f/meter
meto= 0. meters
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -