Module snd-dt019x  -----------------    Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP    only)    port	- Port # (PnP setup)    mpu_port	- Port # for MPU-401 (PnP setup)    fm_port	- Port # for FM OPL-3 (PnP setup)    irq		- IRQ # (PnP setup)    mpu_irq	- IRQ # for MPU-401 (PnP setup)    dma8	- DMA # (PnP setup)    Module supports up to 8 cards.  This module is enabled only with    ISA PnP support.  Module snd-dummy  ----------------    Module for the dummy sound card. This "card" doesn't do any output    or input, but you may use this module for any application which    requires a sound card (like RealPlayer).  Module snd-emu10k1  ------------------    Module for EMU10K1/EMU10k2 based PCI sound cards.			* Sound Blaster Live!			* Sound Blaster PCI 512			* Emu APS (partially supported)			* Sound Blaster Audigy    extin   - bitmap of available external inputs for FX8010 (see bellow)    extout  - bitmap of available external outputs for FX8010 (see bellow)    seq_ports - allocated sequencer ports (4 by default)    max_synth_voices - limit of voices used for wavetable (64 by default)    max_buffer_size  - specifies the maximum size of wavetable/pcm buffers                       given in MB unit.  Default value is 128.    enable_ir - enable IR    Module supports up to 8 cards and autoprobe.    Input & Output configurations 			[extin/extout]	* Creative Card wo/Digital out			[0x0003/0x1f03]	* Creative Card w/Digital out			[0x0003/0x1f0f]	* Creative Card w/Digital CD in			[0x000f/0x1f0f]	* Creative Card wo/Digital out + LiveDrive	[0x3fc3/0x1fc3]	* Creative Card w/Digital out + LiveDrive	[0x3fc3/0x1fcf]	* Creative Card w/Digital CD in + LiveDrive	[0x3fcf/0x1fcf]	* Creative Card wo/Digital out + Digital I/O 2  [0x0fc3/0x1f0f]	* Creative Card w/Digital out + Digital I/O 2	[0x0fc3/0x1f0f]	* Creative Card w/Digital CD in + Digital I/O 2	[0x0fcf/0x1f0f]        * Creative Card 5.1/w Digital out + LiveDrive	[0x3fc3/0x1fff]	* Creative Card 5.1 (c) 2003			[0x3fc3/0x7cff]        * Creative Card all ins and outs		[0x3fff/0x7fff]      Module snd-emu10k1x  -------------------    Module for Creative Emu10k1X (SB Live Dell OEM version)    Module supports up to 8 cards.  Module snd-ens1370  ------------------    Module for Ensoniq AudioPCI ES1370 PCI sound cards.			* SoundBlaster PCI 64			* SoundBlaster PCI 128    joystick		- Enable joystick (default off)    Module supports up to 8 cards and autoprobe.      Module snd-ens1371  ------------------    Module for Ensoniq AudioPCI ES1371 PCI sound cards.			* SoundBlaster PCI 64			* SoundBlaster PCI 128			* SoundBlaster Vibra PCI    joystick_port	- port # for joystick (0x200,0x208,0x210,0x218),			  0 = disable (default), 1 = auto-detect    Module supports up to 8 cards and autoprobe.      Module snd-es968  ----------------    Module for sound cards based on ESS ES968 chip (PnP only).    port	- port # for ES968 (SB8) chip (PnP setup)    irq		- IRQ # for ES968 (SB8) chip (PnP setup)    dma1	- DMA # for ES968 (SB8) chip (PnP setup)        Module supports up to 8 cards, PnP and autoprobe.      Module snd-es1688  -----------------    Module for ESS AudioDrive ES-1688 and ES-688 sound cards.    port	- port # for ES-1688 chip (0x220,0x240,0x260)    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)    irq		- IRQ # for ES-1688 chip (5,7,9,10)    mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)    dma8	- DMA # for ES-1688 chip (0,1,3)    Module supports up to 8 cards and autoprobe (without MPU-401 port).  Module snd-es18xx  -----------------    Module for ESS AudioDrive ES-18xx sound cards.    port	- port # for ES-18xx chip (0x220,0x240,0x260)    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)    fm_port	- port # for FM (optional, not used)    irq		- IRQ # for ES-18xx chip (5,7,9,10)    dma1	- first DMA # for ES-18xx chip (0,1,3)    dma2	- first DMA # for ES-18xx chip (0,1,3)    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)    Module supports up to 8 cards ISA PnP and autoprobe (without MPU-401 port    if native ISA PnP routines are not used).    When dma2 is equal with dma1, the driver works as half-duplex.    The power-management is supported.  Module snd-es1938  -----------------    Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.    Module supports up to 8 cards and autoprobe.  Module snd-es1968  -----------------    Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.    total_bufsize	- total buffer size in kB (1-4096kB)    pcm_substreams_p	- playback channels (1-8, default=2)    pcm_substreams_c	- capture channels (1-8, default=0)    clock		- clock (0 = auto-detection)    use_pm		- support the power-management (0 = off, 1 = on,			  2 = auto (default))    enable_mpu		- enable MPU401 (0 = off, 1 = on, 2 = auto (default))    joystick		- enable joystick (default off)           Module supports up to 8 cards and autoprobe.    The power-management is supported.  Module snd-fm801  ----------------    Module for ForteMedia FM801 based PCI sound cards.    tea575x_tuner       - Enable TEA575x tuner                          - 1 = MediaForte 256-PCS                          - 2 = MediaForte 256-PCPR                          - 3 = MediaForte 64-PCR                            - High 16-bits are video (radio) device number + 1                          - example: 0x10002 (MediaForte 256-PCPR, device 1)    Module supports up to 8 cards and autoprobe.      Module snd-gusclassic  ---------------------    Module for Gravis UltraSound Classic sound card.    port	- port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)    irq		- IRQ # for GF1 chip (3,5,9,11,12,15)    dma1	- DMA # for GF1 chip (1,3,5,6,7)    dma2	- DMA # for GF1 chip (1,3,5,6,7,-1=disable)    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)    voices	- GF1 voices limit (14-32)    pcm_voices	- reserved PCM voices    Module supports up to 8 cards and autoprobe.  Module snd-gusextreme  ---------------------    Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.    port	- port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)    gf1_port	- port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable    irq		- IRQ # for ES-1688 chip (5,7,9,10)    gf1_irq	- IRQ # for GF1 chip (3,5,9,11,12,15)    mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)    dma8	- DMA # for ES-1688 chip (0,1,3)    dma1	- DMA # for GF1 chip (1,3,5,6,7)    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)    voices	- GF1 voices limit (14-32)    pcm_voices	- reserved PCM voices    Module supports up to 8 cards and autoprobe (without MPU-401 port).  Module snd-gusmax  -----------------    Module for Gravis UltraSound MAX sound card.    port	- port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)    irq		- IRQ # for GF1 chip (3,5,9,11,12,15)    dma1	- DMA # for GF1 chip (1,3,5,6,7)    dma2	- DMA # for GF1 chip (1,3,5,6,7,-1=disable)    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)    voices	- GF1 voices limit (14-32)    pcm_voices	- reserved PCM voices    Module supports up to 8 cards and autoprobe.      Module snd-hda-intel  --------------------    Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450,	       VIA VT8251/VT8237A    model	- force the model name    position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)    Module supports up to 8 cards.    Each codec may have a model table for different configurations.    If your machine isn't listed there, the default (usually minimal)    configuration is set up.  You can pass "model=<name>" option to    specify a certain model in such a case.  There are different    models depending on the codec chip.	  Model name	Description	  ----------    -----------	ALC880	  3stack	3-jack in back and a headphone out	  3stack-digout	3-jack in back, a HP out and a SPDIF out	  5stack	5-jack in back, 2-jack in front	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out	  6stack	6-jack in back, 2-jack in front	  6stack-digout	6-jack with a SPDIF out	  w810		3-jack	  z71v		3-jack (HP shared SPDIF)	  asus		3-jack	  uniwill	3-jack	  F1734		2-jack	  test		for testing/debugging purpose, almost all controls can be			adjusted.  Appearing only when compiled with			$CONFIG_SND_DEBUG=y	CMI9880	  minimal	3-jack in back	  min_fp	3-jack in back, 2-jack in front	  full		6-jack in back, 2-jack in front	  full_dig	6-jack in back, 2-jack in front, SPDIF I/O	  allout	5-jack in back, 2-jack in front, SPDIF out	  auto		auto-config reading BIOS (default)    If the default configuration doesn't work and one of the above    matches with your device, report it together with the PCI    subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel    ML (see the section "Links and Addresses").    Note 2: If you get click noises on output, try the module option	    position_fix=1 or 2.  position_fix=1 will use the SD_LPIB	    register value without FIFO size correction as the current	    DMA pointer.  position_fix=2 will make the driver to use	    the position buffer instead of reading SD_LPIB register.	    (Usually SD_LPLIB register is more accurate than the	    position buffer.)  Module snd-hdsp  ---------------    Module for RME Hammerfall DSP audio interface(s)    Module supports up to 8 cards.    Note: The firmware data can be automatically loaded via hotplug          when CONFIG_FW_LOADER is set.  Otherwise, you need to load          the firmware via hdsploader utility included in alsa-tools          package.          The firmware data is found in alsa-firmware package.    Note: snd-page-alloc module does the job which snd-hammerfall-mem          module did formerly.  It will allocate the buffers in advance          when any HDSP cards are found.  To make the buffer          allocation sure, load snd-page-alloc module in the early          stage of boot sequence.  See "Early Buffer Allocation"	  section.  Module snd-hdspm  ----------------    Module for RME HDSP MADI board.    precise_ptr		- Enable precise pointer, or disable.    line_outs_monitor	- Send playback streams to analog outs by default.    enable_monitor	- Enable Analog Out on Channel 63/64 by default.    See hdspm.txt for details.  Module snd-ice1712  ------------------    Module for Envy24 (ICE1712) based PCI sound cards.			* MidiMan M Audio Delta 1010			* MidiMan M Audio Delta 1010LT			* MidiMan M Audio Delta DiO 2496			* MidiMan M Audio Delta 66			* MidiMan M Audio Delta 44			* MidiMan M Audio Delta 410			* MidiMan M Audio Audiophile 2496                        * TerraTec EWS 88MT                        * TerraTec EWS 88D                        * TerraTec EWX 24/96                        * TerraTec DMX 6Fire			* TerraTec Phase 88                        * Hoontech SoundTrack DSP 24                        * Hoontech SoundTrack DSP 24 Value                        * Hoontech SoundTrack DSP 24 Media 7.1			* Event Electronics, EZ8                        * Digigram VX442			* Lionstracs, Mediastaton    model       - Use the given board model, one of the following:		  delta1010, dio2496, delta66, delta44, audiophile, delta410,		  delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,		  dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,		  phase88, mediastation    omni	- Omni I/O support for MidiMan M-Audio Delta44/66    cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)                     in msec resolution, default value is 500 (0.5 sec)    Module supports up to 8 cards and autoprobe. Note: The consumer part    is not used with all Envy24 based cards (for example in the MidiMan Delta    serie).    Note: The supported board is detected by reading EEPROM or PCI	  SSID (if EEPROM isn't available).  You can override the	  model by passing "model" module option in case that the	  driver isn't configured properly or you want to try another	  type for testing.  Module snd-ice1724  ------------------    Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.			* MidiMan M Audio Revolution 7.1			* AMP Ltd AUDIO2000			* TerraTec Aureon 5.1 Sky			* TerraTec Aureon 7.1 Space			* TerraTec Aureon 7.1 Universe			* TerraTec Phase 22			* TerraTec Phase 28			* AudioTrak Prodigy 7.1			* AudioTrak Prodigy 192			* Pontis MS300			* Albatron K8X800 Pro II 			* Chaintech ZNF3-150			* Chaintech ZNF3-250			* Chaintech 9CJS			* Chaintech AV-710			* Shuttle SN25P    model       - Use the given board model, one of the following:		  revo71, amp2000, prodigy71, prodigy192, aureon51,		  aureon71, universe, k8x800, phase22, phase28, ms300,		  av710    Module supports up to 8 cards and autoprobe.    Note: The supported board is detected by reading EEPROM or PCI	  SSID (if EEPROM isn't available).  You can override the	  model by passing "model" module option in case that the	  driver isn't configured properly or you want to try another	  type for testing.  Module snd-intel8x0  -------------------    Module for AC'97 motherboards from Intel and compatibles.			* Intel i810/810E, i815, i820, i830, i84x, MX440			* SiS 7012 (SiS 735)			* NVidia NForce, NForce2			* AMD AMD768, AMD8111			* ALi m5455    ac97_clock	  - AC'97 codec clock base (0 = auto-detect)    ac97_quirk    - AC'97 workaround for strange hardware		    See "AC97 Quirk Option" section below.    buggy_irq     - Enable workaround for buggy interrupts on some                    motherboards (default yes on nForce chips,		    otherwise off)    buggy_semaphore - Enable workaround for hardwares with buggy		    semaphores (e.g. on some ASUS laptops)		    (default off)    Module supports autoprobe and multiple bus-master chips (max 8).    Note: the latest driver supports auto-detection of chip clock.    if you still encounter too fast playback, specify the clock    explicitly via the module option "ac97_clock=41194".    Joystick/MIDI ports are not supported by this driver.  If your    motherboard has these devices, use the ns558 or snd-mpu401    modules, respectively.    The power-management is supported.