/* ads860/config.h - Motorola 860ads board configuration header *//* Copyright 1984-1997 Wind River Systems, Inc. *//*modification history--------------------01a,12/5/2000, 	Change DEFAULT_BOOT_LINE;		#define EDO_DRAM;		include the DOS file system;		redefine SPLL to 50Mhz		add "#define INCLUDE_NETWORK" *//*This file contains the configuration parameters for theMotorola MPC860ADS board.*/#ifndef	INCconfigh#define	INCconfigh/* BSP version/revision identification, should be placed * before #include "configAll.h" */#define BSP_VER_1_1     1#define BSP_VER_1_2     1#define BSP_VERSION     "1.2"#define BSP_REV         "/4"		/* 0 for the first bsp revision */#include "configAll.h"#undef  FADS_860T #define DEFAULT_BOOT_LINE \"cpm(0,0)wangbq:c:/windows/vxWorks h=10.1.5.18 e=10.1.5.252 u=target tn=target"/* DRAM type on the ADS board */#define EDO_DRAM			/* to define if the DRAM is EDO */ #undef INCLUDE_SDRAM		/* to define in case of SDRAM *//* Cache and MMU not supported */#ifdef	EDO_DRAM#   undef USER_I_CACHE_ENABLE#   undef USER_D_CACHE_ENABLE#   undef INCLUDE_CACHE_SUPPORT#endif	/* EDO_DRAM */#define USER_I_MMU_ENABLE#define USER_D_MMU_ENABLE#define INCLUDE_MMU_BASIC/* Number of TTY definition */#undef	NUM_TTY#define	NUM_TTY		N_SIO_CHANNELS		/* defined in 860sar.h *//* user defined, hardware debug */#define DRAM_DEBUG/* Optional timestamp support */#undef	INCLUDE_TIMESTAMP/* optional TrueFFS support *//*#define INCLUDE_TFFS*/#undef INCLUDE_TFFS#ifdef INCLUDE_TFFS#define INCLUDE_DOSFS		/* dosFs file system */#define INCLUDE_SHOW_ROUTINES	/* show routines for system facilities*/#endif /* INCLUDE_DOSFS *//* clock rates */#define	SYS_CLK_RATE_MIN	1	/* minimum system clock rate */#define	SYS_CLK_RATE_MAX	8000	/* maximum system clock rate */#define	AUX_CLK_RATE_MIN	1	/* minimum auxiliary clock rate */#define	AUX_CLK_RATE_MAX	8000	/* maximum auxiliary clock rate *//* * Cristal Frequency - This macro defines the input oscillator frequency * clocking the PPC860. On the ADS board, the CPU is clocked by a cristal * running at 4 Mhz. */#define CRISTAL_FREQ		4000000			/* 4 Mhz *//* * SPLL_FREQ_REQUESTED - This macro defined the expected system PLL (SPLL) * frequency divided by 2. The two supported frequencies are either 25 * or 50 MHz. Use 50Mhz in the case of a FADS860T board. */#define SPLL_FREQ_REQUESTED  FREQ_50_MHZ              25 Mhz => 50Mhz /*#define SPLL_FREQ_REQUESTED  FREQ_25_MHZ */            /* 25 Mhz => 50Mhz *//* * DRAM refresh frequency - This macro defines the DRAM refresh frequency. * e.i: A DRAM with 1024 rows to refresh in 16ms:  * DRAM_REFRESH_FREQ = 1024/ 16E-3 = 64E3 hz */#define DRAM_REFRESH_FREQ	64000	/* * Baud Rate Generator division factor - 0 for division by 1 *					 1 for division by 4 *					 2 for division by 16 *					 3 for division by 64 */#define BRGCLK_DIV_FACTOR  0#define INCLUDE_END              /* Enhanced Network Driver see configNet.h */#undef INCLUDE_END#define INCLUDE_NETWORK#undef INCLUDE_NETWORK#undef INCLUDE_MOT_FEC          	/* define if you are using the FEC. */    #ifdef	INCLUDE_NETWORK    #define INCLUDE_CPM		/* include the CPM ethernet driver */#endif /* INCLUDE_NETWORK *//* remove unnecessary drivers */#undef INCLUDE_BP#undef INCLUDE_EX#undef INCLUDE_ENP#undef INCLUDE_SM_NET#undef INCLUDE_SM_SEQ_ADD/* miscellaneous definitions */ #define NV_RAM_SIZE     NONE            /* no NVRAM */ /* Memory addresses */#define LOCAL_MEM_LOCAL_ADRS	0x00000000	/* Base of RAM */#define LOCAL_MEM_SIZE			0x00400000 	/* 4 Mbyte memory available */#define DRAM_BASE_ADRS_0		0X00000000#define DRAM_SIZE_0       		0x00400000#define DRAM_BASE_ADRS_1 		0X00400000#define DRAM_SIZE_1       		0x00400000#define DRAM_BASE_ADRS_2	 	0X00800000#define DRAM_SIZE_2 	      	0x00400000/*#define MT90820_BASE_ADRS 		0x02100000#define MT90820_SIZE      		0x00008000*/#define ROM_BASE_ADRS			0x02800000	/* base address of ROM */#define ROM_TEXT_ADRS			ROM_BASE_ADRS + 0x100#define ROM_SIZE				   0x00400000 	#define AM29F040B_ADRS       	0x02c00000#define AM29F040B_SIZE          0x00080000	#define SRAM_BASE_ADRS 			0x03000000#define SRAM_SIZE       		0x00200000	/* 2M */#define MT90840_BASE_ADRS       0x03200000#define MT90840_SIZE            0x00100000  /* 1M */#define DS2154_ADRS(n)          (0x10000000 + 0x00800000 * n)#define DS2154_SIZE             0x00800000 /* 64K *//* RAM address for ROM boot */#define RAM_HIGH_ADRS			(LOCAL_MEM_LOCAL_ADRS + 0x00200000)/* RAM address for sys image */#define RAM_LOW_ADRS			(LOCAL_MEM_LOCAL_ADRS + 0x00010000)#define USER_RESERVED_MEM		0x00000000	/* user reserved memory size *//* flash memory support */#define FLASH_ADRS				0x02800000#define FLASH_SIZE				0x00400000/* * Default power management mode - selected via vxPowerModeSet() in * sysHwInit(). */#define DEFAULT_POWER_MGT_MODE  VX_POWER_MODE_DISABLE#include "860sar.h"				/* include the 860sar params */#endif	/* INCconfigh */#if defined(PRJ_BUILD)#include "prjParams.h"#endif