#start slow, speed up after resetjtag_khz 10#use combined on interfaces or targets that can't set TRST/SRST separatelyreset_config trst_and_srst srst_pulls_trst#jtag scan chain#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)jtag_device 4 0x1 0xf 0xetarget create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi[new_target_name] configure -event reset-start { jtag_khz 10 }[new_target_name] configure -event reset-init { jtag_khz 6000 }[new_target_name] configure -event gdb-?ash-erase-start {	flash protect 0 0 7 off	flash protect 1 0 1 off}[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0#flash bank str7x <base> <size> 0 0 <target#> <variant>flash bank str7x 0x40000000 0x00040000 0 0 0 STR71xflash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x# For more information about the configuration files, take a look at:# openocd.texi