#Script for AT91EB40a#Atmel ties SRST & TRST together, at which point it makes#no sense to use TRST, but use TMS instead.##The annoying thing with tying SRST & TRST together is that#there is no way to halt the CPU *before and during* the#SRST reset, which means that the CPU will run a number#of cycles before it can be halted(as much as milliseconds).reset_config srst_only srst_pulls_trst #jtag scan chain#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)jtag_device 4 0x1 0xf 0xe#target configurationtarget create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4# speed up memory downloadsarm7_9 fast_memory_access enablearm7_9 dcc_downloads enable#flash driverflash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf# required for usable performance. Used for lots of# other things than flash programming.[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0[new_target_name] configure -event reset-init {	puts "Running reset init script for AT91EB40A"	# Reset script for AT91EB40a	reg cpsr 0x000000D3	mww 0xFFE00020 0x1	mww 0xFFE00024 0x00000000  	mww 0xFFE00000 0x01002539 	mww 0xFFFFF124 0xFFFFFFFF  	mww 0xffff0010 0x100	mww 0xffff0034 0x100}