/* * Definitions for talking to the PMU.  The PMU is a microcontroller * which controls battery charging and system power on PowerBook 3400 * and 2400 models as well as the RTC and various other things. * * Copyright (C) 1998 Paul Mackerras. */#define PMU_DRIVER_VERSION	2/* * PMU commands */#define PMU_POWER_CTRL0		0x10	/* control power of some devices */#define PMU_POWER_CTRL		0x11	/* control power of some devices */#define PMU_ADB_CMD		0x20	/* send ADB packet */#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */#define PMU_SET_RTC		0x30	/* set real-time clock */#define PMU_READ_RTC		0x38	/* read real-time clock */#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */#define PMU_INT_ACK		0x78	/* read interrupt bits */#define PMU_SHUTDOWN		0x7e	/* turn power off */#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */#define PMU_SLEEP		0x7f	/* put CPU to sleep */#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */#define PMU_I2C_CMD		0x9a	/* I2C operations */#define PMU_RESET		0xd0	/* reset CPU */#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */#define PMU_GET_COVER		0xdc	/* report cover open/closed */#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */#define PMU_GET_VERSION		0xea	/* read the PMU version *//* Bits to use with the PMU_POWER_CTRL0 command */#define PMU_POW0_ON		0x80	/* OR this to power ON the device */#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) *//* Bits to use with the PMU_POWER_CTRL command */#define PMU_POW_ON		0x80	/* OR this to power ON the device */#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */#define PMU_POW_BACKLIGHT	0x01	/* backlight power */#define PMU_POW_CHARGER		0x02	/* battery charger power */#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) *//* Bits in PMU interrupt and interrupt mask bytes */#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */#define PMU_INT_BATTERY		0x20	/* Battery state change */#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */#define PMU_INT_TICK		0x80	/* 1-second tick interrupt *//* Other bits in PMU interrupt valid when PMU_INT_ADB is set */#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? *//* Bits in the environement message (either obtained via PMU_GET_COVER, * or via PMU_INT_ENVIRONMENT on core99 */#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed *//* I2C related definitions */#define PMU_I2C_MODE_SIMPLE	0#define PMU_I2C_MODE_STDSUB	1#define PMU_I2C_MODE_COMBINED	2#define PMU_I2C_BUS_STATUS	0#define PMU_I2C_BUS_SYSCLK	1#define PMU_I2C_BUS_POWER	2#define PMU_I2C_STATUS_OK	0#define PMU_I2C_STATUS_DATAREAD	1#define PMU_I2C_STATUS_BUSY	0xfe/* Kind of PMU (model) */enum {	PMU_UNKNOWN,	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */	PMU_HEATHROW_BASED,	/* PowerBook G3 series */	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */	PMU_68K_V1,		/* 68K PMU, version 1 */	PMU_68K_V2, 		/* 68K PMU, version 2 */};/* PMU PMU_POWER_EVENTS commands */enum {	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,};/* Power events wakeup bits */enum {	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,	PMU_PWR_WAKEUP_RING		= 0x10,};	/* * Ioctl commands for the /dev/pmu device */#include <linux/ioctl.h>/* no param */#define PMU_IOC_SLEEP		_IO('B', 0)/* out param: u32*	backlight value: 0 to 15 */#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)/* in param: u32	backlight value: 0 to 15 */#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)/* out param: u32*	PMU model */#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)/* out param: u32*	has_adb: 0 or 1 */#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) /* out param: u32*	can_sleep: 0 or 1 */#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) /* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t)