#! /bin/bash# Generated by configure.# Run this file to recreate the current configuration.# Compiler output produced by configure, useful for debugging# configure, is in config.log if it exists.debug=falseac_cs_recheck=falseac_cs_silent=falseSHELL=${CONFIG_SHELL-/bin/bash}## --------------------- #### M4sh Initialization.  #### --------------------- ### Be more Bourne compatibleDUALCASE=1; export DUALCASE # for MKS shif test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then  emulate sh  NULLCMD=:  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which  # is contrary to our usage.  Disable this feature.  alias -g '${1+"$@"}'='"$@"'  setopt NO_GLOB_SUBSTelse  case `(set -o) 2>/dev/null` in  *posix*) set -o posix ;;esacfi# PATH needs CR# Avoid depending upon Character Ranges.as_cr_letters='abcdefghijklmnopqrstuvwxyz'as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'as_cr_Letters=$as_cr_letters$as_cr_LETTERSas_cr_digits='0123456789'as_cr_alnum=$as_cr_Letters$as_cr_digits# The user is always right.if test "${PATH_SEPARATOR+set}" != set; then  echo "#! /bin/sh" >conf$$.sh  echo  "exit 0"   >>conf$$.sh  chmod +x conf$$.sh  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then    PATH_SEPARATOR=';'  else    PATH_SEPARATOR=:  fi  rm -f conf$$.shfi# Support unset when possible.if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then  as_unset=unsetelse  as_unset=falsefi# IFS# We need space, tab and new line, in precisely that order.  Quoting is# there to prevent editors from complaining about space-tab.# (If _AS_PATH_WALK were called with IFS unset, it would disable word# splitting by setting IFS to empty value.)as_nl=''IFS=" ""	$as_nl"# Find who we are.  Look in the path if we contain no directory separator.case $0 in  *[\\/]* ) as_myself=$0 ;;  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo  IFS=$as_save_IFS  test -z "$as_dir" && as_dir=.  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && breakdoneIFS=$as_save_IFS     ;;esac# We did not find ourselves, most probably we were run as `sh COMMAND'# in which case we are not to be found in the path.if test "x$as_myself" = x; then  as_myself=$0fiif test ! -f "$as_myself"; then  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2  { (exit 1); exit 1; }fi# Work around bugs in pre-3.0 UWIN ksh.for as_var in ENV MAIL MAILPATHdo ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_vardonePS1='$ 'PS2='> 'PS4='+ '# NLS nuisances.for as_var in \  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \  LC_TELEPHONE LC_TIMEdo  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then    eval $as_var=C; export $as_var  else    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var  fidone# Required to use basename.if expr a : '\(a\)' >/dev/null 2>&1 &&   test "X`expr 00001 : '.*\(...\)'`" = X001; then  as_expr=exprelse  as_expr=falsefiif (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then  as_basename=basenameelse  as_basename=falsefi# Name of the executable.as_me=`$as_basename -- "$0" ||$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \	 X"$0" : 'X\(//\)$' \| \	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||echo X/"$0" |    sed '/^.*\/\([^/][^/]*\)\/*$/{	    s//\1/	    q	  }	  /^X\/\(\/\/\)$/{	    s//\1/	    q	  }	  /^X\/\(\/\).*/{	    s//\1/	    q	  }	  s/.*/./; q'`# CDPATH.$as_unset CDPATH  as_lineno_1=$LINENO  as_lineno_2=$LINENO  test "x$as_lineno_1" != "x$as_lineno_2" &&  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO  # uniformly replaced by the line number.  The first 'sed' inserts a  # line-number line after each line using $LINENO; the second 'sed'  # does the real work.  The second script uses 'N' to pair each  # line-number line with the line containing $LINENO, and appends  # trailing '-' during substitution so that $LINENO is not a special  # case at line end.  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the  # scripts with optimization help from Paolo Bonzini.  Blame Lee  # E. McMahon (1931-1989) for sed's syntax.  :-)  sed -n '    p    /[$]LINENO/=  ' <$as_myself |    sed '      s/[$]LINENO.*/&-/      t lineno      b      :lineno      N      :loop      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/      t loop      s/-\n.*//    ' >$as_me.lineno &&  chmod +x "$as_me.lineno" ||    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2   { (exit 1); exit 1; }; }  # Don't try to exec as it changes $[0], causing all sort of problems  # (the dirname of $[0] is not the place where we might find the  # original and so on.  Autoconf is especially sensitive to this).  . "./$as_me.lineno"  # Exit status is that of the last command.  exit}if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then  as_dirname=dirnameelse  as_dirname=falsefiECHO_C= ECHO_N= ECHO_T=case `echo -n x` in-n*)  case `echo 'x\c'` in  *c*) ECHO_T='	';;	# ECHO_T is single tab character.  *)   ECHO_C='\c';;  esac;;*)  ECHO_N='-n';;esacif expr a : '\(a\)' >/dev/null 2>&1 &&   test "X`expr 00001 : '.*\(...\)'`" = X001; then  as_expr=exprelse  as_expr=falsefirm -f conf$$ conf$$.exe conf$$.fileif test -d conf$$.dir; then  rm -f conf$$.dir/conf$$.fileelse  rm -f conf$$.dir  mkdir conf$$.dirfiecho >conf$$.fileif ln -s conf$$.file conf$$ 2>/dev/null; then  as_ln_s='ln -s'  # ... but there are two gotchas:  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.  # In both cases, we have to default to `cp -p'.  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||    as_ln_s='cp -p'elif ln conf$$.file conf$$ 2>/dev/null; then  as_ln_s=lnelse  as_ln_s='cp -p'firm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.filermdir conf$$.dir 2>/dev/nullif mkdir -p . 2>/dev/null; then  as_mkdir_p=:else  test -d ./-p && rmdir ./-p  as_mkdir_p=falsefiif test -x / >/dev/null 2>&1; then  as_test_x='test -x'else  if ls -dL / >/dev/null 2>&1; then    as_ls_L_option=L  else    as_ls_L_option=  fi  as_test_x='    eval sh -c '\''      if test -d "$1"; then        test -d "$1/.";      else	case $1 in        -*)set "./$1";;	esac;	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in	???[sx]*):;;*)false;;esac;fi    '\'' sh  'fias_executable_p=$as_test_x# Sed expression to map a string onto a valid CPP name.as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"# Sed expression to map a string onto a valid variable name.as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"exec 6>&1# Save the log message, to keep $[0] and so on meaningful, and to# report actual input values of CONFIG_FILES etc. instead of their# values after options handling.ac_log="This file was extended by rdesktop $as_me 1.6.0, which wasgenerated by GNU Autoconf 2.61.  Invocation command line was  CONFIG_FILES    = $CONFIG_FILES  CONFIG_HEADERS  = $CONFIG_HEADERS  CONFIG_LINKS    = $CONFIG_LINKS  CONFIG_COMMANDS = $CONFIG_COMMANDS  $ $0 $@on `(hostname || uname -n) 2>/dev/null | sed 1q`"# Files that config.status was made for.config_files=" Makefile"ac_cs_usage="\\`$as_me' instantiates files from templates according to thecurrent configuration.Usage: $0 [OPTIONS] [FILE]...  -h, --help       print this help, then exit  -V, --version    print version number and configuration settings, then exit  -q, --quiet      do not print progress messages  -d, --debug      don't remove temporary files      --recheck    update $as_me by reconfiguring in the same conditions  --file=FILE[:TEMPLATE]		   instantiate the configuration file FILEConfiguration files:$config_filesReport bugs to <bug-autoconf@gnu.org>."ac_cs_version="\rdesktop config.status 1.6.0configured by ./configure, generated by GNU Autoconf 2.61,  with options \"\"Copyright (C) 2006 Free Software Foundation, Inc.This config.status script is free software; the Free Software Foundationgives unlimited permission to copy, distribute and modify it."ac_pwd='/home/niuny/rdesktop'srcdir='.'INSTALL='/usr/bin/install -c'# If no file are specified by the user, then we need to provide default# value.  By we need to know if files were specified by the user.ac_need_defaults=:while test $# != 0do  case $1 in  --*=*)    ac_option=`expr "X$1" : 'X\([^=]*\)='`    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`    ac_shift=:    ;;  *)    ac_option=$1    ac_optarg=$2    ac_shift=shift    ;;  esac  case $ac_option in  # Handling of the options.  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)    ac_cs_recheck=: ;;  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )    echo "$ac_cs_version"; exit ;;  --debug | --debu | --deb | --de | --d | -d )    debug=: ;;  --file | --fil | --fi | --f )    $ac_shift    CONFIG_FILES="$CONFIG_FILES $ac_optarg"    ac_need_defaults=false;;  --he | --h |  --help | --hel | -h )    echo "$ac_cs_usage"; exit ;;  -q | -quiet | --quiet | --quie | --qui | --qu | --q \  | -silent | --silent | --silen | --sile | --sil | --si | --s)    ac_cs_silent=: ;;  # This is an error.  -*) { echo "$as_me: error: unrecognized option: $1Try \`$0 --help' for more information." >&2   { (exit 1); exit 1; }; } ;;  *) ac_config_targets="$ac_config_targets $1"     ac_need_defaults=false ;;  esac  shiftdoneac_configure_extra_args=if $ac_cs_silent; then  exec 6>/dev/null  ac_configure_extra_args="$ac_configure_extra_args --silent"fiif $ac_cs_recheck; then  echo "running CONFIG_SHELL=/bin/bash /bin/bash ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6  CONFIG_SHELL=/bin/bash  export CONFIG_SHELL  exec /bin/bash "./configure" $ac_configure_extra_args --no-create --no-recursionfiexec 5>>config.log{  echo