/*
*********************************************************************************************************
*                                                uC/OS-II
*                                          The Real-Time Kernel
*                                  MUTUAL EXCLUSION SEMAPHORE MANAGEMENT
*
*                          (c) Copyright 1992-2002, Jean J. Labrosse, Weston, FL
*                                           All Rights Reserved
*
* File : OS_MUTEX.C
* By   : Jean J. Labrosse
*********************************************************************************************************
*/

#ifndef  OS_MASTER_FILE
#include "includes.h"
#endif

/*
*********************************************************************************************************
*                                            LOCAL CONSTANTS
*********************************************************************************************************
*/

#define  OS_MUTEX_KEEP_LOWER_8   0x00FF
#define  OS_MUTEX_KEEP_UPPER_8   0xFF00

#define  OS_MUTEX_AVAILABLE      0x00FF


#if OS_MUTEX_EN > 0
/*
*********************************************************************************************************
*                                   ACCEPT MUTUAL EXCLUSION SEMAPHORE
*
* Description: This  function checks the mutual exclusion semaphore to see if a resource is available.
*              Unlike OSMutexPend(), OSMutexAccept() does not suspend the calling task if the resource is
*              not available or the event did not occur.
*
* Arguments  : pevent     is a pointer to the event control block
*
*              err        is a pointer to an error code which will be returned to your application:
*                            OS_NO_ERR          if the call was successful.
*                            OS_ERR_EVENT_TYPE  if 'pevent' is not a pointer to a mutex
*                            OS_ERR_PEVENT_NULL 'pevent' is a NULL pointer
*                            OS_ERR_PEND_ISR     if you called this function from an ISR
*
* Returns    : == 1       if the resource is available, the mutual exclusion semaphore is acquired
*              == 0       a) if the resource is not available
*                         b) you didn't pass a pointer to a mutual exclusion semaphore
*                         c) you called this function from an ISR
*
* Warning(s) : This function CANNOT be called from an ISR because mutual exclusion semaphores are
*              intended to be used by tasks only.
*********************************************************************************************************
*/

#if OS_MUTEX_ACCEPT_EN > 0
INT8U  OSMutexAccept (OS_EVENT *pevent, INT8U *err)
{
#if OS_CRITICAL_METHOD == 3                            /* Allocate storage for CPU status register     */
    OS_CPU_SR  cpu_sr;
#endif    
    
    
    if (OSIntNesting > 0) 
    {                            /* Make sure it's not called from an ISR        */
        *err = OS_ERR_PEND_ISR;
        return (0);
    }
#if OS_ARG_CHK_EN > 0
    if (pevent == (OS_EVENT *)0) 
    {                     /* Validate 'pevent'                            */
        *err = OS_ERR_PEVENT_NULL;
        return (0);
    }
    if (pevent->OSEventType != OS_EVENT_TYPE_MUTEX) 
    {  /* Validate event block type                    */
        *err = OS_ERR_EVENT_TYPE;
        return (0);
    }
#endif                                                     
    OS_ENTER_CRITICAL();							   /* Get value (0 or 1) of Mutex                  */
    if ((pevent->OSEventCnt & OS_MUTEX_KEEP_LOWER_8) == OS_MUTEX_AVAILABLE) 
    {     
        pevent->OSEventCnt &= OS_MUTEX_KEEP_UPPER_8;   /*      Mask off LSByte (Acquire Mutex)         */
        pevent->OSEventCnt |= OSTCBCur->OSTCBPrio;     /*      Save current task priority in LSByte    */
        pevent->OSEventPtr  = (void *)OSTCBCur;        /*      Link TCB of task owning Mutex           */
        OS_EXIT_CRITICAL();
        *err = OS_NO_ERR;
        return (1);
    }
    OS_EXIT_CRITICAL();
    *err = OS_NO_ERR;
    return (0);
}
#endif                                                     

/*$PAGE*/
/*
*********************************************************************************************************
*                                  CREATE A MUTUAL EXCLUSION SEMAPHORE
*
* Description: This function creates a mutual exclusion semaphore.
*
* Arguments  : prio          is the priority to use when accessing the mutual exclusion semaphore.  In
*                            other words, when the semaphore is acquired and a higher priority task
*                            attempts to obtain the semaphore then the priority of the task owning the
*                            semaphore is raised to this priority.  It is assumed that you will specify
*                            a priority that is LOWER in value than ANY of the tasks competing for the
*                            mutex.
*
*              err           is a pointer to an error code which will be returned to your application:
*                               OS_NO_ERR           if the call was successful.
*                               OS_ERR_CREATE_ISR   if you attempted to create a MUTEX from an ISR
*                               OS_PRIO_EXIST       if a task at the priority inheritance priority
*                                                   already exist.
*                               OS_ERR_PEVENT_NULL  No more event control blocks available.
*                               OS_PRIO_INVALID     if the priority you specify is higher that the 
*                                                   maximum allowed (i.e. > OS_LOWEST_PRIO)
*
* Returns    : != (void *)0  is a pointer to the event control clock (OS_EVENT) associated with the
*                            created mutex.
*              == (void *)0  if an error is detected.
*
* Note(s)    : 1) The LEAST significant 8 bits of '.OSEventCnt' are used to hold the priority number
*                 of the task owning the mutex or 0xFF if no task owns the mutex.
*              2) The MOST  significant 8 bits of '.OSEventCnt' are used to hold the priority number
*                 to use to reduce priority inversion.
*********************************************************************************************************
*/

OS_EVENT  *OSMutexCreate (INT8U prio, INT8U *err)
{
#if OS_CRITICAL_METHOD == 3                                /* Allocate storage for CPU status register */
    OS_CPU_SR  cpu_sr;
#endif    
    OS_EVENT  *pevent;


    if (OSIntNesting > 0) 
    {                                /* See if called from ISR ...               */
        *err = OS_ERR_CREATE_ISR;                          /* ... can't CREATE mutex from an ISR       */
        return ((OS_EVENT *)0);
    }
#if OS_ARG_CHK_EN > 0
    if (prio >= OS_LOWEST_PRIO) 
    {                          /* Validate PIP                             */
        *err = OS_PRIO_INVALID;
        return ((OS_EVENT *)0);
    }
#endif
    OS_ENTER_CRITICAL();
    if (OSTCBPrioTbl[prio] != (OS_TCB *)0) 
    {               /* Mutex priority must not already exist    */
        OS_EXIT_CRITICAL();                                /* Task already exist at priority ...       */
        *err = OS_PRIO_EXIST;                              /* ... inheritance priority                 */
        return ((OS_EVENT *)0);                            
    }
    OSTCBPrioTbl[prio] = (OS_TCB *)1;                      /* Reserve the table entry                  */
    pevent             = OSEventFreeList;                  /* Get next free event control block        */
    if (pevent == (OS_EVENT *)0) 
    {                         /* See if an ECB was available              */
        OSTCBPrioTbl[prio] = (OS_TCB *)0;                  /* No, Release the table entry              */
        OS_EXIT_CRITICAL();
        *err               = OS_ERR_PEVENT_NULL;           /* No more event control blocks             */
        return (pevent);
    }
    OSEventFreeList     = (OS_EVENT *)OSEventFreeList->OSEventPtr;   /* Adjust the free list           */
    OS_EXIT_CRITICAL();
    pevent->OSEventType = OS_EVENT_TYPE_MUTEX;
    pevent->OSEventCnt  = (prio << 8) | OS_MUTEX_AVAILABLE;/* Resource is available                    */
    pevent->OSEventPtr  = (void *)0;                       /* No task owning the mutex                 */
    OS_EventWaitListInit(pevent);
    *err                = OS_NO_ERR;
    return (pevent);
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                          DELETE A MUTEX
*
* Description: This function deletes a mutual exclusion semaphore and readies all tasks pending on the it.
*
* Arguments  : pevent        is a pointer to the event control block associated with the desired mutex.
*
*              opt           determines delete options as follows:
*                            opt == OS_DEL_NO_PEND   Delete mutex ONLY if no task pending
*                            opt == OS_DEL_ALWAYS    Deletes the mutex even if tasks are waiting.
*                                                    In this case, all the tasks pending will be readied.
*
*              err           is a pointer to an error code that can contain one of the following values:
*                            OS_NO_ERR               The call was successful and the mutex was deleted
*                            OS_ERR_DEL_ISR          If you attempted to delete the MUTEX from an ISR
*                            OS_ERR_INVALID_OPT      An invalid option was specified
*                            OS_ERR_TASK_WAITING     One or more tasks were waiting on the mutex
*                            OS_ERR_EVENT_TYPE       If you didn't pass a pointer to a mutex
*                            OS_ERR_PEVENT_NULL      If 'pevent' is a NULL pointer.
*
* Returns    : pevent        upon error
*              (OS_EVENT *)0 if the mutex was successfully deleted.
*
* Note(s)    : 1) This function must be used with care.  Tasks that would normally expect the presence of
*                 the mutex MUST check the return code of OSMutexPend().
*              2) This call can potentially disable interrupts for a long time.  The interrupt disable
*                 time is directly proportional to the number of tasks waiting on the mutex.
*              3) Because ALL tasks pending on the mutex will be readied, you MUST be careful because the
*                 resource(s) will no longer be guarded by the mutex.
*********************************************************************************************************
*/

#if OS_MUTEX_DEL_EN
OS_EVENT  *OSMutexDel (OS_EVENT *pevent, INT8U opt, INT8U *err)
{
#if OS_CRITICAL_METHOD == 3                      /* Allocate storage for CPU status register           */
    OS_CPU_SR  cpu_sr;
#endif    
    BOOLEAN    tasks_waiting;
    INT8U      pip;


    if (OSIntNesting > 0) 
    {                                /* See if called from ISR ...               */
        *err = OS_ERR_DEL_ISR;                             /* ... can't DELETE from an ISR             */
        return (pevent);
    }
#if OS_ARG_CHK_EN > 0
    if (pevent == (OS_EVENT *)0) 
    {                         /* Validate 'pevent'                        */
        *err = OS_ERR_PEVENT_NULL;
        return ((OS_EVENT *)0);
    }
    if (pevent->OSEventType != OS_EVENT_TYPE_MUTEX) 
    {      /* Validate event block type                */
        *err = OS_ERR_EVENT_TYPE;
        return (pevent);
    }
#endif
    OS_ENTER_CRITICAL();
    if (pevent->OSEventGrp != 0x00) 
    {                      /* See if any tasks waiting on mutex        */
        tasks_waiting = TRUE;                              /* Yes                                      */
    } 
    else 
    {
        tasks_waiting = FALSE;                             /* No                                       */
    }
    switch (opt) 
    {
        case OS_DEL_NO_PEND:                               /* Delete mutex only if no task waiting     */
             if (tasks_waiting == FALSE) 
             {
                 pip                 = (INT8U)(pevent->OSEventCnt >> 8);
                 OSTCBPrioTbl[pip]   = (OS_TCB *)0;        /* Free up the PIP                          */
                 pevent->OSEventType = OS_EVENT_TYPE_UNUSED;
                 pevent->OSEventPtr  = OSEventFreeList;    /* Return Event Control Block to free list  */
                 OSEventFreeList     = pevent;
                 OS_EXIT_CRITICAL();
                 *err = OS_NO_ERR;
                 return ((OS_EVENT *)0);                   /* Mutex has been deleted                   */
             } 
             else 
             {
                 OS_EXIT_CRITICAL();
                 *err = OS_ERR_TASK_WAITING;
                 return (pevent);
             }

        case OS_DEL_ALWAYS:                                /* Always delete the mutex                  */
             while (pevent->OSEventGrp != 0x00) 
             {          /* Ready ALL tasks waiting for mutex        */
                 OS_EventTaskRdy(pevent, (void *)0, OS_STAT_MUTEX);
             }
             pip                 = (INT8U)(pevent->OSEventCnt >> 8);
             OSTCBPrioTbl[pip]   = (OS_TCB *)0;            /* Free up the PIP                          */
             pevent->OSEventType = OS_EVENT_TYPE_UNUSED;
             pevent->OSEventPtr  = OSEventFreeList;        /* Return Event Control Block to free list  */
             OSEventFreeList     = pevent;                 /* Get next free event control block        */
             OS_EXIT_CRITICAL();
             if (tasks_waiting == TRUE) 
             {                  /* Reschedule only if task(s) were waiting  */
                 OS_Sched();                               /* Find highest priority task ready to run  */
             }
             *err = OS_NO_ERR;
             return ((OS_EVENT *)0);                       /* Mutex has been deleted                   */

        default:
             OS_EXIT_CRITICAL();
             *err = OS_ERR_INVALID_OPT;
             return (pevent);
    }
}
#endif