//////can 單消息發送程序////////////////
///////2can_t.c////////////////////////
#include "candeal0.h"
void canini(){
	clear_msg_objects();
	init_msg_object_RX (0x04,1);//初始化發送
	init_msg_object_TX (0x02,2);
	EIE2 |= 0x20;
	EA = 1;
	SFRPAGE = CAN0_PAGE;
	CAN0CN=0X41;
	CAN0ADR=BITREG;
	CAN0DAT=0X34c0;//調波特率
	start_CAN();
}
void config(){
//看門狗禁止
	WDTCN = 0x07;	
    WDTCN = 0xDE;   
   	WDTCN = 0xAD;
	SFRPAGE = 0x0F;
//交叉開關使能，但沒有進行外圍設備配置
	XBR0 = 0x00;	
	XBR1 = 0x00;	
	XBR2 = 0x40;
 	XBR3 = 0x00;   
//管腳輸出配置，P0口為開漏輸出，其中P0.6接上拉電阻，P0為數字輸入口
 	SFRPAGE = 0x0F;
 	P0MDOUT = 0x00; 
 	P1MDIN = 0xFF;  
//晶振配置，采用內部晶振8分頻
	SFRPAGE = 0x0F;
 	CLKSEL = 0x00;  
	OSCXCN = 0x00;	
	OSCICN = 0x84;	
}
main(){
	config();
	canini();
	transmit(2);
	while(1);
	
}
void ISRname (void) interrupt 19

{	temppage=SFRPAGE;
   SFRPAGE = CAN0_PAGE;
   status = CAN0STA;
   if ((status&0x10) != 0){
	   CAN0STA&=0xef;
	   receive_data (0x04);
   } 
   
  
   SFRPAGE=temppage;
}