/*---------------------------------------------------------------------------
; FILE NAME: C8051F330.H
; TARGET MCUs: C8051F330, F331
; DESCRIPTION: Register/bit definitions for the C8051F330 product family.
;
; REVISION 1.0
;
;---------------------------------------------------------------------------*/

/*  BYTE Registers  */

#ifndef _C8051F330_
#define _C8051F330_

sfr P0			= 0x80;	/* PORT 0 LATCH */
sfr SP			= 0x81;	/* STACK POINTER */
sfr DPL			= 0x82;	/* DATA POINTER LOW */
sfr DPH			= 0x83;	/* DATA POINTER HIGH */
sfr PCON			= 0x87;	/* POWER CONTROL */
sfr TCON			= 0x88;	/* TIMER/COUNTER CONTROL */
sfr TMOD			= 0x89;	/* TIMER/COUNTER MODE */
sfr TL0			= 0x8A;	/* TIMER/COUNTER 0 LOW */
sfr TL1			= 0x8B;	/* TIMER/COUNTER 1 LOW */
sfr TH0			= 0x8C;	/* TIMER/COUNTER 0 HIGH */
sfr TH1			= 0x8D;	/* TIMER/COUNTER 1 HIGH */
sfr CKCON		= 0x8E;	/* CLOCK CONTROL */
sfr PSCTL 		= 0x8F;	/* PROGRAM STORE R/W CONTROL */
sfr P1			= 0x90;	/* PORT 1 LATCH */
sfr TMR3CN		= 0x91;	/* TIMER/COUNTER 3 CONTROL */
sfr TMR3RLL		= 0x92;	/* TIMER/COUNTER 3 RELOAD LOW */
sfr TMR3RLH		= 0x93; /* TIMER/COUNTER 3 RELOAD HIGH */
sfr TMR3L 		= 0x94; /* TIMER/COUNTER 3 LOW */
sfr TMR3H 		= 0x95; /* TIMER/COUNTER 3 HIGH */
sfr IDA0L		= 0x96; /* CURRENT MODE DAC0 LOW */
sfr IDA0H		= 0x97; /* CURRENT MODE DAC0 HIGH */
sfr SCON0		= 0x98; /* UART0 CONTROL */
sfr SBUF0		= 0x99; /* UART0 DATA BUFFER */
sfr CPT0CN 		= 0x9B; /* COMPARATOR0 CONTROL */
sfr CPT0MD		= 0x9D; /* COMPARATOR0 MODE SELECTION */
sfr CPT0MX 		= 0x9F; /* COMPARATOR0 MUX SELECTION */
sfr P2			= 0xA0; /* PORT 2 LATCH */
sfr SPI0CFG 		= 0xA1; /* SPI CONFIGURATION */
sfr SPI0CKR		= 0xA2; /* SPI CLOCK RATE CONTROL */
sfr SPI0DAT		= 0xA3; /* SPI DATA */
sfr P0MDOUT 	= 0xA4; /* PORT 0 OUTPUT MODE CONFIGURATION */
sfr P1MDOUT		= 0xA5; /* PORT 1 OUTPUT MODE CONFIGURATION */
sfr P2MDOUT		= 0xA6; /* PORT 2 OUTPUT MODE CONFIGURATION */
sfr IE			= 0xA8; /* INTERRUPT ENABLE */
sfr CLKSEL		= 0xA9; /* CLOCK SELECT */
sfr EMI0CN		= 0xAA; /* EXTERNAL MEMORY INTERFACE CONTROL */
sfr OSCXCN		= 0xB1; /* EXTERNAL OSCILLATOR CONTROL */
sfr OSCICN		= 0xB2; /* INTERNAL OSCILLATOR CONTROL */
sfr OSCICL		= 0xB3; /* INTERNAL OSCILLATOR CALIBRATION */
sfr FLSCL		= 0xB6; /* FLASH SCALE */
sfr FLKEY		= 0xB7; /* FLASH LOCK AND KEY  */
sfr IP			= 0xB8; /* INTERRUPT PRIORITY */
sfr IDA0CN		= 0xB9; /* CURRENT MODE DAC0 CONTROL */
sfr AMX0N		= 0xBA; /* AMUX0 NEGATIVE CHANNEL SELECT */
sfr AMX0P		= 0xBB; /* AMUX0 POSITIVE CHANNEL SELECT */
sfr ADC0CF 		= 0xBC; /* ADC0 CONFIGURATION */
sfr ADC0L 		= 0xBD; /* ADC0 LOW */
sfr ADC0H 		= 0xBE; /* ADC0 HIGH */
sfr SMB0CN		= 0xC0; /* SMBUS CONTROL */
sfr SMB0CF		= 0xC1; /* SMBUS CONFIGURATION */
sfr SMB0DAT		= 0xC2; /* SMBUS DATA */
sfr ADC0GTL 		= 0xC3; /* ADC0 GREATER-THAN COMPARE LOW */
sfr ADC0GTH		= 0xC4; /* ADC0 GREATER-THAN COMPARE HIGH */
sfr ADC0LTL		= 0xC5; /* ADC0 LESS-THAN COMPARE WORD LOW */
sfr ADC0LTH 		= 0xC6; /* ADC0 LESS-THAN COMPARE WORD HIGH */
sfr TMR2CN 		= 0xC8; /* TIMER/COUNTER 2 CONTROL */
sfr TMR2RLL		= 0xCA; /* TIMER/COUNTER 2 RELOAD LOW */
sfr TMR2RLH 		= 0xCB; /* TIMER/COUNTER 2 RELOAD HIGH */
sfr TMR2L		= 0xCC; /* TIMER/COUNTER 2 LOW */
sfr TMR2H 		= 0xCD; /* TIMER/COUNTER 2 HIGH */
sfr PSW			= 0xD0; /* PROGRAM STATUS WORD */
sfr REF0CN		= 0xD1; /* VOLTAGE REFERENCE CONTROL */
sfr P0SKIP		= 0xD4; /* PORT 0 SKIP */
sfr P1SKIP		= 0xD5; /* PORT 1 SKIP */
sfr PCA0CN 		= 0xD8; /* PCA CONTROL */
sfr PCA0MD		= 0xD9; /* PCA MODE  */
sfr PCA0CPM0      = 0xDA; /* PCA MODULE 0 MODE REGISTER */
sfr PCA0CPM1      = 0xDB; /* PCA MODULE 1 MODE REGISTER */
sfr PCA0CPM2      = 0xDC; /* PCA MODULE 2 MODE REGISTER */
sfr ACC			= 0xE0; /* ACCUMULATOR */
sfr XBR0			= 0xE1; /* PORT I/O CROSSBAR CONTROL 0 */
sfr XBR1			= 0xE2; /* PORT I/O CROSSBAR CONTROL 1 */
sfr OSCLCN		= 0xE3; /* LOW-FREQUENCY OSCILLATOR CONTROL */
sfr IT01CF		= 0xE4; /* INT0/INT1 CONFIGURATION */
sfr EIE1			= 0xE6; /* EXTENDED INTERRUPT ENABLE 1 */
sfr ADC0CN 		= 0xE8; /* ADC0 CONTROL */
sfr PCA0CPL1		= 0xE9; /* PCA CAPTURE 1 LOW */
sfr PCA0CPH1	= 0xEA; /* PCA CAPTURE 1 HIGH */
sfr PCA0CPL2		= 0xEB; /* PCA CAPTURE 2 LOW */
sfr PCA0CPH2	= 0xEC; /* PCA CAPTURE 2 HIGH */
sfr RSTSRC		= 0xEF; /* RESET SOURCE CONFIGURATION/STATUS */
sfr B				= 0xF0; /* B REGISTER */
sfr P0MDIN		= 0xF1; /* PORT 0 INPUT MODE CONFIGURATION */
sfr P1MDIN 		= 0xF2; /* PORT 1 INPUT MODE CONFIGURATION */
sfr EIP1			= 0xF6; /* EXTENDED INTERRUPT PRIORITY 1 */
sfr SPI0CN		= 0xF8; /* SPI CONTROL */
sfr PCA0L 		= 0xF9; /* PCA COUNTER LOW */
sfr PCA0H		= 0xFA; /* PCA COUNTER HIGH */
sfr PCA0CPL0 	= 0xFB; /* PCA CAPTURE 0 LOW */
sfr PCA0CPH0	= 0xFC; /* PCA CAPTURE 0 HIGH */
sfr VDM0CN 		= 0xFF; /* VDD MONITOR CONTROL */

/* Bit Definitions */

/* TCON 0x88 */
sbit TF1 			= 0x8F ;  /* TIMER 1 OVERFLOW FLAG */
sbit TR1 			= 0x8E ;  /* TIMER 1 ON/OFF CONTROL */
sbit TF0 			= 0x8D ;  /* TIMER 0 OVERFLOW FLAG */
sbit TR0 			= 0x8C ;  /* TIMER 0 ON/OFF CONTROL */
sbit IE1 			= 0x8B ;  /* EXT. INTERRUPT 1 EDGE FLAG */
sbit IT1 			= 0x8A ;  /* EXT. INTERRUPT 1 TYPE */
sbit IE0 			= 0x89 ;  /* EXT. INTERRUPT 0 EDGE FLAG */
sbit IT0 			= 0x88 ;  /* EXT. INTERRUPT 0 TYPE */

/* SCON0 0x98 */
sbit S0MODE 		= 0x9F ;  /* UART 0 MODE */
sbit MCE0 		= 0x9D ;  /* UART 0 MCE */
sbit REN0 		= 0x9C ;  /* UART 0 RX ENABLE */
sbit TB80 		= 0x9B ;  /* UART 0 TX BIT 8 */
sbit RB80 		= 0x9A ;  /* UART 0 RX BIT 8 */
sbit TI0 			= 0x99 ;  /* UART 0 TX INTERRUPT FLAG */
sbit RI0 			= 0x98 ;  /* UART 0 RX INTERRUPT FLAG */

/* IE 0xA8 */
sbit EA 			=  0xAF ;  /* GLOBAL INTERRUPT ENABLE */
sbit ESPI0 		=  0xAE ;  /* SPI0 INTERRUPT ENABLE */
sbit ET2  		=  0xAD ;  /* TIMER 2 INTERRUPT ENABLE */
sbit ES0  		=  0xAC ;  /* UART0 INTERRUPT ENABLE */
sbit ET1 			=  0xAB ;  /* TIMER 1 INTERRUPT ENABLE */
sbit EX1 			=  0xAA ;  /* EXTERNAL INTERRUPT 1 ENABLE */
sbit ET0 			=  0xA9 ;  /* TIMER 0 INTERRUPT ENABLE */
sbit EX0 			=  0xA8 ;  /* EXTERNAL INTERRUPT 0 ENABLE */

/* IP 0xB8 */
sbit PSPI0 		=  0xBE ;  /* SPI0 PRIORITY */
sbit PT2 			=  0xBD ;  /* TIMER 2 PRIORITY */
sbit PS0 			=  0xBC ;  /* UART0 PRIORITY */
sbit PT1 			=  0xBB ;  /* TIMER 1 PRIORITY */
sbit PX1 			=  0xBA ;  /* EXTERNAL INTERRUPT 1 PRIORITY */
sbit PT0 			=  0xB9 ;  /* TIMER 0 PRIORITY */
sbit PX0 			=  0xB8 ;  /* EXTERNAL INTERRUPT 0 PRIORITY */

/* SMB0CN 0xC0 */
sbit MASTER 		=  0xC7 ;  /* SMBUS 0 MASTER/SLAVE */
sbit TXMODE 		=  0xC6 ;  /* SMBUS 0 TRANSMIT MODE */
sbit STA  		=  0xC5 ;  /* SMBUS 0 START FLAG */
sbit STO 			=  0xC4 ;  /* SMBUS 0 STOP FLAG */
sbit ACKRQ 		=  0xC3 ;  /* SMBUS 0 ACKNOWLEDGE REQUEST */
sbit ARBLOST 	=  0xC2 ;  /* SMBUS 0 ARBITRATION LOST */
sbit ACK 			=  0xC1 ;  /* SMBUS 0 ACKNOWLEDGE FLAG */
sbit SI 			=  0xC0 ;  /* SMBUS 0 INTERRUPT PENDING FLAG */

/* TMR2CN 0xC8 */
sbit TF2H 		=  0xCF ;  /* TIMER 2 HIGH BYTE OVERFLOW FLAG */
sbit TF2L 		=  0xCE ;  /* TIMER 2 LOW BYTE OVERFLOW FLAG */
sbit TF2LEN 		=  0xCD ;  /* TIMER 2 LOW BYTE INTERRUPT ENABLE */
sbit TF2CEN 		=  0xCC ;  /* TIMER 2 LFO CAPTURE ENABLE */
sbit T2SPLIT 		=  0xCB ;  /* TIMER 2 SPLIT MODE ENABLE */
sbit TR2 			=  0xCA ;  /* TIMER 2 ON/OFF CONTROL */
sbit T2XCLK 		=  0xC8 ;  /* TIMER 2 EXTERNAL CLOCK SELECT */

/* PSW 0xD0 */
sbit CY 			=  0xD7 ;  /* CARRY FLAG */
sbit AC 			=  0xD6 ;  /* AUXILIARY CARRY FLAG */
sbit F0 			=  0xD5 ;  /* USER FLAG 0 */
sbit RS1 			=  0xD4 ;  /* REGISTER BANK SELECT 1 */
sbit RS0 			=  0xD3 ;  /* REGISTER BANK SELECT 0 */
sbit OV 			=  0xD2 ;  /* OVERFLOW FLAG */
sbit F1 			=  0xD1 ;  /* USER FLAG 1 */
sbit P 			=  0xD0 ;  /* ACCUMULATOR PARITY FLAG */

/* PCA0CN 0xD8 */
sbit CF 			=  0xDF ;  /* PCA 0 COUNTER OVERFLOW FLAG */
sbit CR 			=  0xDE ;  /* PCA 0 COUNTER RUN CONTROL BIT */
sbit CCF2 		=  0xDA ;  /* PCA 0 MODULE 2 INTERRUPT FLAG */
sbit CCF1 		=  0xD9 ;  /* PCA 0 MODULE 1 INTERRUPT FLAG */
sbit CCF0 		=  0xD8 ;  /* PCA 0 MODULE 0 INTERRUPT FLAG */
                          /* ADC 0 WINDOW INTERRUPT FLAG */
/* ADC0CN 0xE8 */
sbit AD0EN  		=  0xEF ;  /* ADC 0 ENABLE */
sbit AD0TM 		=  0xEE ;  /* ADC 0 TRACK MODE */
sbit AD0INT 		=  0xED ;  /* ADC 0 EOC INTERRUPT FLAG */
sbit AD0BUSY 	=  0xEC ;  /* ADC 0 BUSY FLAG */
sbit AD0WINT 	=  0xEB ;  /* ADC 0 WINDOW INTERRUPT FLAG */
sbit AD0CM2 		=  0xEA ;  /* ADC 0 CONVERT START MODE BIT 2 */
sbit AD0CM1   	=  0xE9 ;  /* ADC 0 CONVERT START MODE BIT 1 */
sbit AD0CM0 		=  0xE8 ;  /* ADC 0 CONVERT START MODE BIT 0 */

/* SPI0CN 0xF8 */
sbit SPIF 		=  0xFF ;  /* SPI 0 INTERRUPT FLAG */
sbit WCOL 		=  0xFE ;  /* SPI 0 WRITE COLLISION FLAG */
sbit MODF 		=  0xFD ;  /* SPI 0 MODE FAULT FLAG */
sbit RXOVRN 		=  0xFC ;  /* SPI 0 RX OVERRUN FLAG */
sbit NSSMD1 		=  0xFB ;  /* SPI 0 SLAVE SELECT MODE 1 */
sbit NSSMD0 		=  0xFA ;  /* SPI 0 SLAVE SELECT MODE 0 */
sbit TXBMT 		=  0xF9 ;  /* SPI 0 TX BUFFER EMPTY FLAG */
sbit SPIEN 		=  0xF8 ;  /* SPI 0 SPI ENABLE */

/*added 2008.9.9 */

//定義HP03SB溫度氣壓模塊接口

sbit	SCL= P1^2;
sbit	SDA= P0^1;
sbit	XCLR= P0^6;
sbit	MCLK = P0^7;
//定義CME8000DIE電波鐘模塊接口
sbit	SS1= P1^7;
sbit	SS2= P1^6;
sbit	CLOCK= P1^5;
sbit	DR= P1^4;
sbit	Dianbo_DATA= P1^3;
sbit	HLD= P1^1;
sbit	PON= P1^0;