/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			target.c
** Last modified Date:	2004-09-17
** Last Version:		1.0
** Descriptions:		header file of the specific codes for LPC2100 target boards
**						Every project should include a copy of this file, user may modify it as needed
**------------------------------------------------------------------------------------------------------
** Created by:			Chenmingji
** Created date:		2004-02-02
** Version:				1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			Chenmingji
** Modified date:		2004-09-17
** Version:				1.01
** Descriptions:		Renewed the template, added more compiler supports 
**
**------------------------------------------------------------------------------------------------------
**Modified by:			LinEnqiang
** Modified date:		2007/05/26	
** Version:				1.02
** Descriptions: 		Modified for NXP23XX
**
**------------------------------------------------------------------------------------------------------
**Modified by:			ZhangMingJie
** Modified date:		2008/02/25	
** Version:				1.02
** Descriptions: 		Added for LPC2470/70
**
********************************************************************************************************/


#define IN_TARGET
#include "config.h"

/*********************************************************************************************************
** Function name:			FIQ_Exception
**
** Descriptions:			Fast interrupt exceptional handler , change it as needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void FIQ_Exception(void)
{
   // while(1);                   // change it to your code  這一句替換為自己的代碼
}

/*********************************************************************************************************
** Function name:			TargetInit
**
** Descriptions:			Initialize the target board; it is called in a necessary place, change it as 
**							needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetInit(void)
{
    /* 添加自己的代碼 */
    /* Add your codes here */
}

/*********************************************************************************************************
** Function name:			TargetResetInit
**
** Descriptions:			Initialize the target 
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:				Zhangmingjie
** Modified date:			2008/02/23
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetResetInit(void)
{


#ifdef __DEBUG_RAM    
    MEMMAP = 0x02;                  									/*  remap						*/
#endif

#ifdef __DEBUG_FLASH    
    MEMMAP = 0x01;                   									/*  remap						*/
#endif

#ifdef __IN_CHIP    
    MEMMAP = 0x01;                   									/*  remap						*/                                                                              
#endif
#ifdef __OUT_CHIP    

	/*
	 *  Edit for LPC2460/70
	 *  LPC2460/70必須使用外部NorFlash啟動方式
	 *  此處將中斷向量表的64個字節復制到內部0x4000000開始處
	 *  同樣在分散加載文件出也要做相應修改
	 */
    unsigned int i;
    uint32 *piCp1, *piCp2;

    extern void Reset(void);
    
    piCp1 = (uint32 *)Reset;
    piCp2 = (uint32 *)0x40000000;
    for (i = 0; i < 16; i++)
    {
        *piCp2++ = *piCp1++;
    }
	/*  
	 *  Edit for LPC2460/70	
	 */
    
    MEMMAP           = 0x02;                   							/*  remap						*/
    PINSEL6          = 0x55555555;
    PINSEL8          = 0x55555554;
    PINSEL9          = 0x40050155;              						/*  CS1							*/
    EMCControl       = 0x01;                    						/*  不進行CS1映射				*/
    EMCStaticConfig1 = 0x00000101;              						/*  使用默認延時				*/
#endif 		
	if ( PLLSTAT & (1 << 25) )
    {
		PLLCON = 1;						// Enable PLL, disconnected 
		PLLFEED = 0xAA;
		PLLFEED = 0x55;
    }

    PLLCON = 0;							//Disable PLL, disconnected 
    PLLFEED = 0xAA;
    PLLFEED = 0x55;
    while(PLLSTAT & (3 << 24));	
	
    SCS = (SCS & 0x04)|0x20;             // Enable the main OSC,,1MHz～20MHz       							      
	while((SCS & 0x40) == 0 );			 // Wait until main OSC is usable 
	
	CLKSRCSEL = 0x01;					 // select main OSC as the PLL clock source 	
										 
    PLLCFG  = (((PLL_NValue) << 16)|(PLL_MValue));    
      
	PLLCON = 1;
    PLLFEED = 0xAA;							// Enable but disconnect the PLL
    PLLFEED = 0x55;	
    while (((PLLSTAT & (1 << 24)) == 0));	// Wait until the PLL is usable
	
	CCLKCFG = CCLKDivValue;	
	   	
	#if USE_USB 			
 		USBCLKCFG = USBCLKDivValue;			// usbclk = 288 MHz/6 = 48 MHz 
 		PCONP |= 0x80000000;				// Turn On USB PCLK
	#else 	  		
		USBCLKCFG = USBCLKDivValue;	
		PCONP &= 0x7FFFFFFF;    	
	#endif 		
	while ( ((PLLSTAT & (1 << 26)) == 0) );	// Check lock bit status 
	while (((PLLSTAT & 0x00007FFF) != PLL_MValue) && (((PLLSTAT & 0x00FF0000) >> 16) != PLL_NValue));
	
 	PLLCON  = 3;								// connect the PLL 
    PLLFEED = 0xAA;
    PLLFEED = 0x55;	    						
	while (((PLLSTAT & (1 << 25))!= (1 << 25)));// Wait until the PLL is connected and locked
	
// Set system timers for each component 
#if (Fpclk / (Fcclk / 4)) == 1

    PCLKSEL0 = 0x00000000;				// PCLK is 1/4 CCLK 
    PCLKSEL1 = 0x00000000;

#else

    #if (Fpclk / (Fcclk / 4)) == 2

    PCLKSEL0 = 0xAAAAAAAA;				// PCLK is 1/2 CCLK 
    PCLKSEL1 = 0xAAAAAAAA;	 

    #else

    PCLKSEL0 = 0x55555555;				// PCLK is the same as CCLK 
    PCLKSEL1 = 0x55555555;	
    
    #endif 
#endif

/* Set memory accelerater module*/     
   MAMCR = 0;
#if Fcclk < 20000000
    MAMTIM = 1;
#else
    #if Fcclk < 40000000
    	MAMTIM = 2;
    #else
   		MAMTIM = 3;
    #endif
#endif
    MAMCR = 2;      	
    /* Add your codes here */
   
    return;
}
/*********************************************************************************************************
**                  以下為一些與系統相關的庫函數的實現
**                  具體作用請ads的參考編譯器與庫函數手冊
**                  用戶可以根據自己的要求修改        
********************************************************************************************************/
/*********************************************************************************************************
**                  The implementations for some library functions
**                  For more details, please refer to the ADS compiler handbook and The library 
**					function manual
**                  User could change it as needed       
********************************************************************************************************/

#include "rt_sys.h"
#include "stdio.h"

#pragma import(__use_no_semihosting_swi)
#pragma import(__use_two_region_memory)


int __rt_div0(int a)
{
    a = a;
    return 0;
}

int fputc(int ch,FILE *f)
{
    ch = ch;
    f = f;
    return 0;
}

int fgetc(FILE *f)
{
    f = f;
    return 0;
}

int _sys_close(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

int _sys_write(FILEHANDLE fh, const unsigned char * buf,
                      unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    return 0;
}

int _sys_read(FILEHANDLE fh, unsigned char * buf,
                     unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    
    return 0;
}

void _ttywrch(int ch)
{
    ch = ch;
}

int _sys_istty(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

int _sys_seek(FILEHANDLE fh, long pos)
{
    fh = fh;
    return 0;
}

int _sys_ensure(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

long _sys_flen(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

int _sys_tmpnam(char * name, int sig, unsigned maxlen)
{
    name = name;
    sig = sig;
    maxlen = maxlen;
    return 0;
}

void _sys_exit(int returncode)
{
    while(1);
}

char *_sys_command_string(char * cmd, int len)
{
    cmd = cmd;
    len = len;
    return 0;
}
/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/