# ----------------------------------------------------------------------#           Template for SNMP Access Control List File## o Copy this template to snmp.acl# o Set access control for SNMP support# o Change the permission of snmp.acl to be read-only#   by the owner.## See below for the location of snmp.acl file.# ----------------------------------------------------------------------#############################################################            SNMP Access Control List File  ############################################################## Default location of this file is $JRE/lib/management/snmp.acl.# You can specify an alternate location by specifying a property in # the management config file $JRE/lib/management/management.properties# or by specifying a system property (See that file for details).################################################################        File permissions of the snmp.acl file############################################################### #      Since there are cleartext community strings stored in this file,#      this ACL file must be readable by ONLY the owner,#      otherwise the program will exit with an error. ################################################################		Format of the acl group################################################################ communities: a list of SNMP community strings to which the#              access control applies separated by commas.## access: either "read-only" or "read-write".## managers: a list of hosts to be granted the access rights.#    Each can be expressed as any one of the following:#    - hostname: hubble#    - ip v4 and v6 addresses: 123.456.789.12 , fe80::a00:20ff:fe9b:ea82#    - ip v4 and v6 netmask prefix notation: 123.456.789.0/24, #         fe80::a00:20ff:fe9b:ea82/64  #      see RFC 2373 (http://www.ietf.org/rfc/rfc2373.txt)## An example of two community groups for multiple hosts:#    acl = {#     {#       communities = public, private#       access = read-only#       managers = hubble, snowbell, nanak#     }#     {#       communities = jerry#       access = read-write#       managers = hubble, telescope#     }#    }# ###############################################################                   Format of the trap group################################################################ trap-community: a single SNMP community string that will be included#                 in  the traps sent to the hosts.## hosts: a list of hosts to which the SNMP agent will send traps.## An example of two trap community definitions for multiple hosts:#    trap = {#      {#        trap-community = public#        hosts = hubble, snowbell#      }#      {#        trap-community = private#        hosts = telescope#      }#    }###############################################################  Update the community strings (public and private) below#  before copying this template file# 	# Common SNMP ACL Example# ------------------------## o Only localhost can connect, and access rights#   are limited to read-only# o Traps are sent to localhost only### acl = {#  {#    communities = public, private#    access = read-only#    managers = localhost#  }# }# # # trap = {#   {#     trap-community = public#     hosts = localhost #   }# }