/* * linux/include/asm-arm/arch-omap/fpga.h * * Interrupt handler for OMAP-1510 FPGA * * Copyright (C) 2001 RidgeRun, Inc. * Author: Greg Lonnon <glonnon@ridgerun.com> * * Copyright (C) 2002 MontaVista Software, Inc. * * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#define __ASM_ARCH_OMAP_FPGA_H#define omap1510_fpga_init_irq()	(0)#define fpga_read(reg)			__raw_readb(reg)#define fpga_write(val, reg)		__raw_writeb(val, reg)/* * --------------------------------------------------------------------------- *  H2/P2 Debug board FPGA * --------------------------------------------------------------------------- *//* maps in the FPGA registers and the ETHR registers */#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */#define H2P2_DBG_FPGA_START		0x04000000	/* PA */#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line *//* NOTE:  most boards don't have a static mapping for the FPGA ... */struct h2p2_dbg_fpga {	/* offset 0x00 */	u16		smc91x[8];	/* offset 0x10 */	u16		fpga_rev;	u16		board_rev;	u16		gpio_outputs;	u16		leds;	/* offset 0x18 */	u16		misc_inputs;	u16		lan_status;	u16		lan_reset;	u16		reserved0;	/* offset 0x20 */	u16		ps2_data;	u16		ps2_ctrl;	/* plus also 4 rs232 ports ... */};/* LEDs definition on debug board (16 LEDs, all physically green) */#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)#define H2P2_DBG_FPGA_LED_RED		(1 << 13)#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)/*  cpu0 load-meter LEDs */#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)/* * --------------------------------------------------------------------------- *  OMAP-1510 FPGA * --------------------------------------------------------------------------- */#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */#define OMAP1510_FPGA_SIZE			SZ_4K#define OMAP1510_FPGA_START			0x08000000	/* Physical *//* Revision */#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)/* Interrupt status */#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)/* Interrupt mask */#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)/* Reset registers */#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)/* * Power up Giga UART driver, turn on HID clock. * Turn off BT power, since we're not using it and it * draws power. */#define OMAP1510_FPGA_RESET_VALUE		0x42#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)/* * Innovator/OMAP1510 FPGA HID register bit definitions */#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */#define OMAP1510_FPGA_HID_rsrvd	(1<<6)#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run *//* The FPGA IRQ is cascaded through GPIO_13 */#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)/* IRQ Numbers for interrupts muxed through the FPGA */#define OMAP1510_IH_FPGA_BASE		IH_BOARD_BASE#define OMAP1510_INT_FPGA_ATN		(OMAP1510_IH_FPGA_BASE + 0)#define OMAP1510_INT_FPGA_ACK		(OMAP1510_IH_FPGA_BASE + 1)#define OMAP1510_INT_FPGA2		(OMAP1510_IH_FPGA_BASE + 2)#define OMAP1510_INT_FPGA3		(OMAP1510_IH_FPGA_BASE + 3)#define OMAP1510_INT_FPGA4		(OMAP1510_IH_FPGA_BASE + 4)#define OMAP1510_INT_FPGA5		(OMAP1510_IH_FPGA_BASE + 5)#define OMAP1510_INT_FPGA6		(OMAP1510_IH_FPGA_BASE + 6)#define OMAP1510_INT_FPGA7		(OMAP1510_IH_FPGA_BASE + 7)#define OMAP1510_INT_FPGA8		(OMAP1510_IH_FPGA_BASE + 8)#define OMAP1510_INT_FPGA9		(OMAP1510_IH_FPGA_BASE + 9)#define OMAP1510_INT_FPGA10		(OMAP1510_IH_FPGA_BASE + 10)#define OMAP1510_INT_FPGA11		(OMAP1510_IH_FPGA_BASE + 11)#define OMAP1510_INT_FPGA12		(OMAP1510_IH_FPGA_BASE + 12)#define OMAP1510_INT_ETHER		(OMAP1510_IH_FPGA_BASE + 13)#define OMAP1510_INT_FPGAUART1		(OMAP1510_IH_FPGA_BASE + 14)#define OMAP1510_INT_FPGAUART2		(OMAP1510_IH_FPGA_BASE + 15)#define OMAP1510_INT_FPGA_TS		(OMAP1510_IH_FPGA_BASE + 16)#define OMAP1510_INT_FPGA17		(OMAP1510_IH_FPGA_BASE + 17)#define OMAP1510_INT_FPGA_CAM		(OMAP1510_IH_FPGA_BASE + 18)#define OMAP1510_INT_FPGA_RTC_A		(OMAP1510_IH_FPGA_BASE + 19)#define OMAP1510_INT_FPGA_RTC_B		(OMAP1510_IH_FPGA_BASE + 20)#define OMAP1510_INT_FPGA_CD		(OMAP1510_IH_FPGA_BASE + 21)#define OMAP1510_INT_FPGA22		(OMAP1510_IH_FPGA_BASE + 22)#define OMAP1510_INT_FPGA23		(OMAP1510_IH_FPGA_BASE + 23)