/**************************************************************
4*4 Key Scan
**************************************************************/

#include "def.h"
#include "option.h"
#include "2440addr.h"
#include "2440lib.h"
#include "2440slib.h" 

/******************************************************************************
	1X6 矩陣鍵盤
六個輸入引腳：	EINT8 -----( GPG0  )
				EINT11 -----( GPG3  )
				EINT13-----( GPG5  )
				EINT14-----( GPG6 )
				EINT15-----( GPG7 )
				EINT19-----( GPG11 )
				
				
******************************************************************************/
U8 Key_Scan( void )
{
	Delay( 80 ) ;

	if(      (rGPGDAT&(1<< 0)) == 0 )	
		return 1 ;
	else if( (rGPGDAT&(1<< 3)) == 0 )
		return 2;
	else if( (rGPGDAT&(1<< 5)) == 0 )
		return 3 ;
	else if( (rGPGDAT&(1<< 6)) == 0 )
		return 4 ;
	else if( (rGPGDAT&(1<< 7)) == 0 )
		return 5 ;
	else if( (rGPGDAT&(1<<11)) == 0 )
		return 6 ;
	else
		return 0xff;

}

static void __irq Key_ISR(void)
{
	U8 key;
	U32 r;

	EnterCritical(&r);
	if(rINTPND==BIT_EINT8_23) {
		ClearPending(BIT_EINT8_23);
		if(rEINTPEND&(1<<8)) {
		//Uart_Printf("eint11\n");
			rEINTPEND |= 1<< 8;
		}
		if(rEINTPEND&(1<<11)) {
		//Uart_Printf("eint11\n");
			rEINTPEND |= 1<< 11;
		}
		if(rEINTPEND&(1<<13)) {
		//Uart_Printf("eint11\n");
			rEINTPEND |= 1<< 13;
		}
		if(rEINTPEND&(1<<14)) {
		//Uart_Printf("eint11\n");
			rEINTPEND |= 1<< 14;
		}
		if(rEINTPEND&(1<<15)) {
		//Uart_Printf("eint11\n");
			rEINTPEND |= 1<< 15;
		}
		if(rEINTPEND&(1<<19)) {
		//	Uart_Printf("eint19\n");		
			rEINTPEND |= 1<< 19;
		}
	}

	key=Key_Scan();
	if( key == 0xff )
		Uart_Printf( "Interrupt occur... Key is released!\n") ;
	else
		Uart_Printf( "Interrupt occur... K%d is pressed!\n", key) ;

	ExitCritical(&r);
}

void KeyScan_Test(void)
{
	Uart_Printf("\nKey Scan Test, press ESC key to exit !\n");	

	
	rGPGCON = rGPGCON & (~((3<<22)|(3<<6)|(3<<0)|(3<<10)|(3<<12)|(3<<14))) |
						 ((2<<22)|(2<<6)|(2<<0)|(2<<10)|(2<<12)|(2<<14)) ;		//GPG11,3 set EINT
	
	rEXTINT1 &= ~(7|(7<<0));	
	rEXTINT1 |= (0|(0<<0));	//set eint8 falling edge int
	
	rEXTINT1 &= ~(7<<12);
	rEXTINT1 |= (0<<12);	//set eint11 falling edge int
	
	rEXTINT1 &= ~(7<<20);
	rEXTINT1 |= (0<<20);	//set eint13 falling edge int
	
	rEXTINT1 &= ~(7<<24);
	rEXTINT1 |= (0<<24);	//set eint14 falling edge int
	
	rEXTINT1 &= ~(7<<28);
	rEXTINT1 |= (0<<28);	//set eint15 falling edge int
		
	rEXTINT2 &= ~(0xf<<12);
	rEXTINT2 |= (0<<12);	//set eint19 falling edge int
	

	rEINTPEND |= (1<<8)|(1<<11)|(1<<13)|(1<<14)|(1<<15)|(1<<19);		//clear eint 11,19
	rEINTMASK &= ~((1<<8)|(1<<11)|(1<<13)|(1<<14)|(1<<15)|(1<<19));	//enable eint11,19
	ClearPending(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);
	pISR_EINT0 = pISR_EINT2 = pISR_EINT8_23 = (U32)Key_ISR;
	EnableIrq(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);	

	 while( Uart_GetKey() != ESC_KEY ) ;
	 DisableIrq(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);	
}