/* ------------------------------------------------------------------------- *//* i2c-algo-bit.c i2c driver algorithms for bit-shift adapters		     *//* ------------------------------------------------------------------------- *//*   Copyright (C) 1995-2000 Simon G. Vogl    This program is free software; you can redistribute it and/or modify    it under the terms of the GNU General Public License as published by    the Free Software Foundation; either version 2 of the License, or    (at your option) any later version.    This program is distributed in the hope that it will be useful,    but WITHOUT ANY WARRANTY; without even the implied warranty of    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the    GNU General Public License for more details.    You should have received a copy of the GNU General Public License    along with this program; if not, write to the Free Software    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     *//* ------------------------------------------------------------------------- *//* With some changes from Frodo Looijaard <frodol@dds.nl>, Ky鰏ti M鋖kki   <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */#include <linux/kernel.h>#include <linux/module.h>#include <linux/delay.h>#include <linux/slab.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/i2c.h>#include <linux/i2c-algo-bit.h>/* ----- global defines ----------------------------------------------- */#define DEB(x) if (i2c_debug>=1) x;#define DEB2(x) if (i2c_debug>=2) x;#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/#define DEBPROTO(x) if (i2c_debug>=9) { x; } 	/* debug the protocol by showing transferred bits *//* ----- global variables ---------------------------------------------	*//* module parameters: */static int i2c_debug;static int bit_test;	/* see if the line-setting functions work	*//* --- setting states on the bus with the right timing: ---------------	*/#define setsda(adap,val) adap->setsda(adap->data, val)#define setscl(adap,val) adap->setscl(adap->data, val)#define getsda(adap) adap->getsda(adap->data)#define getscl(adap) adap->getscl(adap->data)static inline void sdalo(struct i2c_algo_bit_data *adap){	setsda(adap,0);	udelay(adap->udelay);}static inline void sdahi(struct i2c_algo_bit_data *adap){	setsda(adap,1);	udelay(adap->udelay);}static inline void scllo(struct i2c_algo_bit_data *adap){	setscl(adap,0);	udelay(adap->udelay);}/* * Raise scl line, and do checking for delays. This is necessary for slower * devices. */static inline int sclhi(struct i2c_algo_bit_data *adap){	unsigned long start;	setscl(adap,1);	/* Not all adapters have scl sense line... */	if (adap->getscl == NULL ) {		udelay(adap->udelay);		return 0;	}	start=jiffies;	while (! getscl(adap) ) {	 		/* the hw knows how to read the clock line, 		 * so we wait until it actually gets high. 		 * This is safer as some chips may hold it low 		 * while they are processing data internally.  		 */		if (time_after_eq(jiffies, start+adap->timeout)) {			return -ETIMEDOUT;		}		cond_resched();	}	DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));	udelay(adap->udelay);	return 0;} /* --- other auxiliary functions --------------------------------------	*/static void i2c_start(struct i2c_algo_bit_data *adap) {	/* assert: scl, sda are high */	DEBPROTO(printk("S "));	sdalo(adap);	scllo(adap);}static void i2c_repstart(struct i2c_algo_bit_data *adap) {	/* scl, sda may not be high */	DEBPROTO(printk(" Sr "));	setsda(adap,1);	sclhi(adap);	udelay(adap->udelay);		sdalo(adap);	scllo(adap);}static void i2c_stop(struct i2c_algo_bit_data *adap) {	DEBPROTO(printk("P\n"));	/* assert: scl is low */	sdalo(adap);	sclhi(adap); 	sdahi(adap);}/* send a byte without start cond., look for arbitration,    check ackn. from slave *//* returns: * 1 if the device acknowledged * 0 if the device did not ack * -ETIMEDOUT if an error occurred (while raising the scl line) */static int i2c_outb(struct i2c_adapter *i2c_adap, char c){	int i;	int sb;	int ack;	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;	/* assert: scl is low */	for ( i=7 ; i>=0 ; i-- ) {		sb = c & ( 1 << i );		setsda(adap,sb);		udelay(adap->udelay);		DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));		if (sclhi(adap)<0) { /* timed out */			sdahi(adap); /* we don't want to block the net */			DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i));			return -ETIMEDOUT;		};		/* do arbitration here: 		 * if ( sb && ! getsda(adap) ) -> ouch! Get out of here.		 */		setscl(adap, 0 );		udelay(adap->udelay);	}	sdahi(adap);	if (sclhi(adap)<0){ /* timeout */	    DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff));	    return -ETIMEDOUT;	};	/* read ack: SDA should be pulled down by slave */	ack=getsda(adap);	/* ack: sda is pulled low ->success.	 */	DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack));	DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) );	DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") );	scllo(adap);	return 0==ack;		/* return 1 if device acked	 */	/* assert: scl is low (sda undef) */}static int i2c_inb(struct i2c_adapter *i2c_adap) {	/* read byte via i2c port, without start/stop sequence	*/	/* acknowledge is sent in i2c_read.			*/	int i;	unsigned char indata=0;	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;	/* assert: scl is low */	sdahi(adap);	for (i=0;i<8;i++) {		if (sclhi(adap)<0) { /* timeout */			DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i));			return -ETIMEDOUT;		};		indata *= 2;		if ( getsda(adap) ) 			indata |= 0x01;		scllo(adap);	}	/* assert: scl is low */	DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff));	DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff));	return (int) (indata & 0xff);}/* * Sanity check for the adapter hardware - check the reaction of * the bus lines only if it seems to be idle. */static int test_bus(struct i2c_algo_bit_data *adap, char* name) {	int scl,sda;	if (adap->getscl==NULL)		printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "			"SCL is not readable.\n");	sda=getsda(adap);	scl=(adap->getscl==NULL?1:getscl(adap));	printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);	if (!scl || !sda ) {		printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);		goto bailout;	}	sdalo(adap);	sda=getsda(adap);	scl=(adap->getscl==NULL?1:getscl(adap));	printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);	if ( 0 != sda ) {		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");		goto bailout;	}	if ( 0 == scl ) {		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "			"while pulling SDA low!\n");		goto bailout;	}			sdahi(adap);	sda=getsda(adap);	scl=(adap->getscl==NULL?1:getscl(adap));	printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);	if ( 0 == sda ) {		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");		goto bailout;	}	if ( 0 == scl ) {		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "			"while pulling SDA high!\n");		goto bailout;	}	scllo(adap);	sda=getsda(adap);	scl=(adap->getscl==NULL?0:getscl(adap));	printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);	if ( 0 != scl ) {		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");		goto bailout;	}	if ( 0 == sda ) {		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "			"while pulling SCL low!\n");		goto bailout;	}		sclhi(adap);	sda=getsda(adap);	scl=(adap->getscl==NULL?1:getscl(adap));	printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);	if ( 0 == scl ) {		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");		goto bailout;	}	if ( 0 == sda ) {		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "