//====================================================================
// File Name : 2410test.c
// Function  : S3C2410 Test Main Menu
// Program   : Shin, On Pil (SOP)
// Date      : May 30, 2002
// Version   : 0.0
// History
//   0.0 : Programming start (February 20,2002) -> SOP
//   1.0 (20020530) : First release for customer
//   1.1 (20020801) : Strata NOR Flash Added and etc. -> SOP
//====================================================================

//Shin, On Pil
#include "def.h"
#include "option.h"
#include "2410addr.h"
#include "2410lib.h"
#include "2410slib.h"


//#include "k9s1208.h"
#include "mmu.h"
#include "flash.h"

void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);
void HaltDabort(void);


//===================================================================
void main(void)
{    
    char c;
    
    MMU_Init();
       
    ChangeClockDivider(1,1);          // 1:2:4    
    ChangeMPllValue(0xa1,0x3,0x1);    // FCLK=202.8MHz  

    
    Port_Init(); 
    Isr_Init();
    Uart_Init(0,115200);
    Uart_Select(0); 

    Uart_Printf("\nSMDK2410 Board (MCU S3C2410) Boot loader FCLK = %d Hz!\n", FCLK);
    Uart_Printf("Developed by Trulyboy!\n");
    Uart_Printf("Date:2005-12-26\n"); 

	while(1){
	    Uart_Printf("Do you Want to updata flash:\n");
	    Uart_Printf("1.Nand Flash   2.Nor Flash   3.No(Jump to 0x10000)\n");
    	c = Uart_Getch();
	    if(c == '1')
    		K9S1208_Program();
	    else if(c == '2')
    		ProgramFlash();
    	else if(c == '3'){
		 //   Uart_Printf("Jump to 0x10000!\n");
    		BOOTLOAD_JUMP();
    	}
    	else
    		Uart_Printf("Invalid Input\n");
    }
	return;
}

//===================================================================
void Isr_Init(void)
{
    pISR_UNDEF  = (unsigned)HaltUndef;
    pISR_SWI    = (unsigned)HaltSwi;
    pISR_PABORT = (unsigned)HaltPabort;
    pISR_DABORT = (unsigned)HaltDabort;
    
    rINTMOD     = 0x0;                     //All=IRQ mode
//    rINTCON=0x5;                           //Non-vectored,IRQ enable,FIQ disable    
    rINTMSK     = BIT_ALLMSK;              //All interrupt is masked.
    rINTSUBMSK  = BIT_SUB_ALLMSK;          //All sub-interrupt is masked. <- April 01, 2002 SOP

//    rINTSUBMSK  = ~(BIT_SUB_RXD0);         //Enable Rx0 Default value=0x7ff
//    rINTMSK     = ~(BIT_UART0);            //Enable UART0 Default value=0xffffffff    
    
//    pISR_UART0=(unsigned)RxInt;            //pISR_FIQ,pISR_IRQ must be initialized
}

//===================================================================
void HaltUndef(void)
{
    Uart_Printf("Undefined instruction exception.\n");
    while(1);
}

//===================================================================
void HaltSwi(void)
{
    Uart_Printf("SWI exception.\n");
    while(1);
}

//===================================================================
void HaltPabort(void)
{
    Uart_Printf("Pabort exception.\n");
    while(1);
}

//===================================================================
void HaltDabort(void)
{
    Uart_Printf("Dabort exception.\n");
    while(1);
}





/*
//=========================
    while(1)
    {
       Led_Display(3);
    }
//=========================    
*/
/*
//=========================
    while(1)
    {
       Led_Display(1);
       Delay(1500);   
       Led_Display(2);
       Delay(1500);             
       Led_Display(4);
       Delay(1500);   
       Led_Display(8);
       Delay(1500);                
    }
//=========================   
*/