?? dsp28_swprioritizeddefaultisr.c
字號:
IER &= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &= MG23; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_4 (use MINT2 and MG24 masks):
#if (G24PL != 0)
interrupt void T1PINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &= MG24; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_5 (use MINT2 and MG25 masks):
#if (G25PL != 0)
interrupt void T1CINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &= MG25; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_6 (use MINT2 and MG26 masks):
#if (G26PL != 0)
interrupt void T1UFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &= MG26; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER2_7 (use MINT2 and MG27 masks):
#if (G27PL != 0)
interrupt void T1OFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER2.all;
IER |= M_INT2;
IER &= MINT2; // Set "global" priority
PieCtrlRegs.PIEIER2.all &= MG27; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER2.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_1 (use MINT3 and MG31 masks):
#if (G31PL != 0)
interrupt void T2PINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG31; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_2 (use MINT3 and MG32 masks):
#if (G32PL != 0)
interrupt void T2CINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG32; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_3 (use MINT3 and MG33 masks):
#if (G33PL != 0)
interrupt void T2UFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG33; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_4 (use MINT3 and MG34 masks):
#if (G34PL != 0)
interrupt void T2OFINT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG34; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_5 (use MINT3 and MG35 masks):
#if (G35PL != 0)
interrupt void CAPINT1_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG35; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_6 (use MINT3 and MG36 masks):
#if (G36PL != 0)
interrupt void CAPINT2_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG36; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
// Connected to PIEIER3_7 (use MINT3 and MG37 masks):
#if (G37PL != 0)
interrupt void CAPINT3_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER3.all;
IER |= M_INT3;
IER &= MINT3; // Set "global" priority
PieCtrlRegs.PIEIER3.all &= MG37; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER3.all = TempPIEIER;
}
#endif
//---------------------------------------------------------------------------
// EV-B Default ISRs:
//
// Connected to PIEIER1_2 (use MINT1 and MG12 masks):
#if (G12PL != 0)
interrupt void PDPINTB_ISR( void ) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER1.all;
IER |= M_INT1;
IER &= MINT1; // Set "global" priority
PieCtrlRegs.PIEIER1.all &= MG12; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER1.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_1 (use MINT4 and MG41 masks):
#if (G41PL != 0)
interrupt void CMP4INT_ISR(void) // EV-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG41; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_2 (use MINT4 and MG42 masks):
#if (G42PL != 0)
interrupt void CMP5INT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG42; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_3 (use MINT4 and MG43 masks):
#if (G43PL != 0)
interrupt void CMP6INT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG43; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_4 (use MINT4 and MG44 masks):
#if (G44PL != 0)
interrupt void T3PINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG44; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_5 (use MINT4 and MG45 masks):
#if (G45PL != 0)
interrupt void T3CINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG45; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_6 (use MINT4 and MG46 masks):
#if (G46PL != 0)
interrupt void T3UFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG46; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
// Next line for debug only (remove after inserting ISR Code):
ESTOP0;
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER4.all = TempPIEIER;
}
#endif
// Connected to PIEIER4_7 (use MINT4 and MG47 masks):
#if (G47PL != 0)
interrupt void T3OFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER4.all;
IER |= M_INT4;
IER &= MINT4; // Set "global" priority
PieCtrlRegs.PIEIER4.all &= MG47; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -